Parts for Kenmore 253.59682993 (25359682993, 253 59682993): Cabinet Parts

Channels cold air from the evaporator into the refrigerator and freezer compartments. Replace if cracked, broken, or missing to restore proper airflow.

Covers the factory test opening on your refrigerator cabinet or liner. Replace if missing, cracked, or damaged to restore a finished look and seal.

Crisper drawer light not working? This refrigerator light socket connects the bulb to power. Simple DIY fix takes about 15 minutes with basic tools.

Support bracket for refrigerator air duct cover. Secures and stabilizes the duct cover assembly. Replace if broken, cracked, or missing to restore proper fit.

Hex head bolt that secures the adjustment roller assembly to your refrigerator. Replace if stripped, missing, or damaged to restore proper leveling.

#10 OD, steel

Lower hinge tapping plate for refrigerators. Secures the bottom door hinge to the cabinet frame. Replace if cracked, stripped, or damaged.

Lower door hinge bracket for refrigerators. Secures the bottom hinge assembly to the cabinet. Replace if cracked, bent, or stripped to restore door support.

Black corner trim cap for refrigerator cabinet. Covers and protects cabinet corner edges. Replace if cracked, broken, or missing for a clean finish.

This cabinet corner trim restores the finished edge where two cabinet panels meet, covering exposed corners and improving the appliance's appearance. It's a direct-replacement trim piece that helps keep panels aligned and protected from chips. What it does

• Covers and protects exposed cabinet corners from chips, dings and wear
• Hides gaps where cabinet panels meet for a neater appearance
• Helps secure and align adjacent cabinet or console panels
• Useful when original trim is cracked, broken, bent or missing

• Remove any adjacent panels or screws that block access before installing the trim
• Align trim with cabinet edge and press or fasten per the original attachment method
• Use only the OEM replacement part to ensure proper fit; do not force or bend the trim
• Disconnect power before removing panels

The refrigerator upper door hinge bracket mounts to the top of the refrigerator cabinet and supports the upper portion of the door for smooth opening and closing. Replace when the door sags, doesn't align properly, or the hinge bracket is cracked or bent.

Almond-colored cover for the upper hinge assembly on your refrigerator. Replaces cracked, discolored, or missing hinge covers to restore a clean look.

Black plastic cover that conceals the upper door hinge on your refrigerator. Replace if cracked, broken, discolored, or missing for a clean finish.

Rear roller assembly for refrigerators. Mounts under the back of the unit to allow smooth rolling and positioning. Replace if cracked, worn, or broken.

Mounting channel for refrigerator side shelves. Installs on the interior wall to support adjustable shelves. Replace if cracked, broken, or missing.

Color: White

Replace a loose or missing extension lock washer causing rattling noises or unstable component mounting. Simple DIY fix in under 15 minutes.

Replacement screw for various appliances. Used to secure panels, components, or housing. Replace if stripped, corroded, missing, or damaged hardware.

Seals evaporator coil cover to prevent air leaks and frost buildup. Replace when worn or damaged to restore efficient cooling. Confirm fit with model.

Factory fastener that secures panels, brackets, and internal components. Replace missing, stripped, or corroded screws to restore tight fit and eliminate rattling.

Black plastic cover that snaps over the lower door hinge on your refrigerator. Replace if cracked, broken, or missing to restore a finished look.

Machine compartment cover for your refrigerator. Includes caution label. Replace if cracked, broken, or missing to protect internal components.

Refrigerator foam tape seals gaps and reduces vibration. Replace if worn, compressed, or causing air leaks. Verify fit with your model number.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

The Crisper Shelf Support is an OEM part for Frigidaire refrigerators. It is designed to hold the crisper shelf securely in place, providing stable support for the storage of fruits and vegetables.

Over time, the crisper shelf support can become worn or damaged due to regular use, heavy loads, or accidental impacts. If the support breaks or fails, it can lead to an unstable or sagging crisper shelf.

Symptoms of a bad crisper shelf support include:

• The crisper shelf not sitting level
• The shelf falling out of place or not staying securely in position
• Difficulty in inserting or removing the crisper drawer
• Visible cracks or damage to the support

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This owner's manual provides the appliance's operating, safety and care instructions so you can use and maintain the product properly. It covers basic operation, routine maintenance, and troubleshooting guidance in plain language. What it does:

• Explains controls, settings and normal operation to help you get the most from the appliance
• Lists routine maintenance and care steps to reduce common problems
• Provides basic troubleshooting guidance for common symptoms to help determine when service is needed
• Includes safety warnings and handling instructions to reduce risk during operation and maintenance

• No installation required; store manual near the appliance for easy reference
• Follow all safety and electrical warnings in the manual before performing service
• For repairs beyond the manual's guidance, contact an authorized service center
• If you need a replacement or model-specific instructions, confirm the manual matches your appliance serial/model number

This printed repair parts list provides the exploded parts diagram and reference numbers you need to identify replacement parts and plan a repair. It speeds parts lookup so you get the right components without guesswork. What it does:

• Shows exploded diagrams and reference numbers to identify individual components
• Helps locate the exact replacement part numbers for ordering
• Supports troubleshooting by clarifying part relationships and assembly order
• Reduces misordering by matching visual diagrams to the appliance

• This is a reference document only, not a replacement for repair instructions or a service manual
• Use alongside safety procedures and disconnect power before servicing the appliance
• Keep the sheet with your appliance records for future parts lookup

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.

Secures cantilever shelves to prevent shifting or slipping. Replace if cracked, broken, or missing to restore stable shelf support. Confirm fit with model.

Hex head screw for securing panels and components in freezers, refrigerators, washers, and dryers. Replace if missing, stripped, or corroded.

Touch-up paint for appliances to cover scratches, chips, and worn areas on exterior surfaces. Restores appearance of refrigerators, ranges, and more.

The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.

The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.

Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.

Symptoms of needing Touch Up Paint include:

• Visible scratches or chips on the appliance's surface.
• Areas of rust or corrosion that need to be covered after treating the rust.
• The desire to maintain or improve the appliance's appearance for aesthetic reasons or to maintain its value.

This complete ice maker unit produces and dispenses ice cubes in your refrigerator's freezer compartment. It includes all internal mechanisms for water filling, freezing, and ice ejection cycles. Install this assembly if your ice maker has stopped producing ice, makes unusual noises, or produces malformed ice cubes.

Ice won't dispense through the door? A broken auger or cracked ice bin causes this. This complete ice container assembly is a simple slide-in fix in 5 minutes.