Parts for Kenmore 253.9305191 (2539305191, 253 9305191): Cabinet Parts

Plastic

This crisper cover insert replaces the clear shelf that sits over the refrigerator crisper drawer, keeping produce supported and preventing items from falling into the bin. It restores a flat, stable surface for storage. What it does:

• Forms the top surface over a crisper/drawer to support produce and containers
• Helps keep food from dropping into the crisper below
• Replaces cracked, chipped, or missing insert that can catch spills
• Restores proper fit and shelf alignment for smooth drawer operation

• One crisper cover insert

• Handle carefully; this part is fragile and may be glass or clear plastic
• Remove drawers/shelves per your owner's manual to access the opening
• Align the insert into the shelf supports and slide into place until seated

Replacement screw for securing panels, brackets, and covers on appliances. Replaces missing, stripped, or damaged screws to restore alignment.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.

This cabinet corner trim restores the finished edge where two cabinet panels meet, covering exposed corners and improving the appliance's appearance. It's a direct-replacement trim piece that helps keep panels aligned and protected from chips. What it does

• Covers and protects exposed cabinet corners from chips, dings and wear
• Hides gaps where cabinet panels meet for a neater appearance
• Helps secure and align adjacent cabinet or console panels
• Useful when original trim is cracked, broken, bent or missing

• Remove any adjacent panels or screws that block access before installing the trim
• Align trim with cabinet edge and press or fasten per the original attachment method
• Use only the OEM replacement part to ensure proper fit; do not force or bend the trim
• Disconnect power before removing panels

Fix a refrigerator that won't run or cycles incorrectly with this energy saver switch. Controls power-saving mode. Straightforward DIY repair.

This mullion trim piece fills the vertical gap between refrigerator doors and restores the appliance's finished look in wheat color. It covers the door joint and helps maintain a consistent appearance while sealing the edge. What it does:

• Replaces damaged or discolored vertical door trim to restore appearance
• Covers the seam between refrigerator/freezer doors for a finished look
• Helps reduce drafts at the door join by closing the visible gap
• Matches wheat/beige interiors and exterior trim for aesthetic consistency

• 1 mullion trim piece

• Disconnect power to the appliance before beginning any service
• Typically snaps or screws into the door frame—remove old trim carefully to avoid damaging door surfaces
• Use basic hand tools; do not force the part into position

This door-activated light switch controls the interior lamp in your refrigerator. Replace a worn or sticking switch to restore dependable lighting and prevent the bulb from staying on and warming the compartment when the door is closed.

• Opens and closes the light circuit as the door is opened and closed
• Helps prevent the light from staying on with the door shut
• Common symptoms: interior light won't turn on, stays on with the door closed, or works intermittently
• Physical signs may include a stuck/broken plunger or damaged housing

• Disconnect power before servicing
• Gently pry the old switch from the liner/panel and release its locking tabs
• Transfer wires one at a time to the same terminals on the new switch
• Press the new switch fully into place; restore power, and test

Protects wiring harness edges in your refrigerator from wear and abrasion. Replace if cracked, broken, or missing to prevent wire damage and insulation.

Air deflector with cover for freezers. Directs airflow inside the freezer compartment. Replace if cracked, broken, or missing to restore proper air circulation.

The Freezer Shelf is an OEM part for Frigidaire freezers. This shelf provides additional storage space within the freezer, allowing for organized placement of frozen foods and optimizing the use of available space.

Common causes of a bad freezer shelf include overloading the shelf with heavy items, accidental impacts that can cause bending or breakage, or regular wear and tear from frequent use. 

Symptoms of a bad freezer shelf include:

• Cracks or breakage in the shelf material
• The shelf not fitting securely or wobbling
• Difficulty in sliding or positioning the shelf
• Visible warping or bending

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replace your refrigerator's sliding shelf if it's cracked, broken, or worn. This shelf installs inside the fresh food compartment for organized storage.

Replace your cracked or broken refrigerator crisper pan cover. This clear cover protects the crisper drawer and maintains proper humidity for fresh produce.

Replacement crisper drawer for refrigerator fresh food compartment. Replace if cracked, broken, or missing to restore organized produce storage and smooth sliding.

Fix refrigerator cooling issues or compressor leaks with this tube repair kit. Essential sealed system component for restoring proper refrigeration.

Size: Approximate 2.5 inches thick, 33 inches wide and 70 inches long.

Tapping plate that mounts to the freezer cabinet structure. Replace this metal plate if it's cracked, bent, corroded, or missing to restore proper assembly.

This is a flexible, putty-like sealing compound strip used to create airtight and watertight seals on refrigerators and ice machines. It is typically applied around joints, tubing connections, or panel seams to prevent air and moisture leaks. Replace this sealing strip if you notice frost buildup, condensation, or temperature fluctuations caused by a deteriorated or missing seal.

Replacement screw for various appliances. Used to secure panels, components, or housing. Replace if stripped, corroded, missing, or damaged hardware.

Water tube insert sleeve for refrigerators. Fits inside water line connections to prevent leaks. Replace if cracked, damaged, or missing.

This is a factory-style replacement screw used to secure appliance components. It restores proper fastening where the original screw is missing, stripped, or damaged so panels and assemblies stay firmly attached. What it does:

• Fastens panels, brackets, or components to the appliance frame or assemblies
• Replaces missing or damaged mounting hardware that can cause rattles or loose parts
• Provides the correct fit and thread engagement for a secure connection
• Helps maintain appliance alignment and safe operation

• Use the matching screwdriver or bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread or part damage
• Turn off power and remove any access panels before working on electrical components

Secures refrigerator hoses to fittings with spring tension to prevent leaks. Replace when clamp loses grip or shows rust. Verify fit with model number.