Parts for Whirlpool WRT371SZBB00: 01 - Cabinet Parts

Repair manual for refrigerators and freezers made by Whirlpool. Covered brands include Whirlpool, Sears, Kenmore, Kitchen Aid, Roper, and Estate. Easy to follow photographs and step-by-step repair procedures.

Top door hinge assembly mounts at the upper corner of your refrigerator door to support and pivot the door. Replace if cracked, worn, or causing misalignment.

Top door hinge assembly mounts at the upper corner of your refrigerator door to support and pivot the door. Replace if cracked, worn, or causing misalignment.

This cabinet roller helps a door or pull-out drawer roll smoothly along its track for consistent, quieter operation. It replaces a worn or damaged roller to restore even movement and reduce scraping or sticking. What it does:

• Supports and guides a door or drawer along its track for proper alignment and motion
• Reduces noise and friction from worn or damaged rollers
• Helps eliminate sticking, scraping, or uneven travel during opening/closing
• Restores consistent operation when the original roller is cracked, broken, or missing

• One cabinet roller

• Disconnect power to the appliance before beginning any repair
• Inspect the track and surrounding components for wear or debris; clean as needed
• Many rollers snap or screw into place; use appropriate tools and avoid forcing parts

Corrects hinge spacing to realign refrigerator doors and eliminate rubbing or uneven gaps. Replace when doors lean, don't close squarely, or show poor seal contact. Verify fit by model number before ordering.

This replacement cover-unit restores the appliance's exterior housing and protects internal components from dust and damage. It helps maintain proper fit and appearance while keeping electrical and mechanical parts enclosed for safe operation. What it does:

• Replaces a cracked, warped, or missing housing cover to restore the cabinet's fit and finish
• Shields internal components from dust, lint, and accidental contact
• Helps reduce vibration-related rattles caused by loose or damaged panels
• Restores a secure mounting surface for adjacent panels and controls

• Disconnect power to the appliance before beginning any repair
• Basic hand tools typically required; follow model-specific disassembly steps
• Handle edges carefully to avoid scratches or cuts and to protect painted surfaces

This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.

Small plastic washer that supports the refrigerator door hinge assembly. Replace if worn, cracked, or missing to restore proper door alignment.

Size: 8-18 x 1/2 inch.

Plastic end cap that attaches to the side of the refrigerator's front grille. Replace if cracked, broken, or missing for a complete finished look.

Supports the refrigerator door at the bottom pivot point. Replace if your hinge is rusted, bent, cracked, or broken to restore proper door alignment.

Plastic washer that fits between the door hinge and cabinet body. Replace if cracked, worn, or missing to restore smooth door operation and alignment.

Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.

White plastic button plug cap for freezers. Covers holes or fasteners on the interior or exterior cabinet. Replace if cracked, missing, or discolored.

Black plastic button plug for refrigerators and freezers. Covers screw holes or mounting points for a finished look. Replace if cracked, missing, or worn.

Covers seam gaps near door hinges on refrigerator cabinets. Replace if missing, peeling, or damaged to prevent air leaks and maintain appearance.

Cabinet filler trim closes the gap between your refrigerator and surrounding cabinetry. Replace if cracked, broken, or missing to restore appearance.

Trim piece that covers and finishes the outer corner where filler panels meet on your refrigerator. Replace if cracked, broken, or missing.

Center door hinge connects and supports refrigerator doors. Replace if bent, broken, or lost during moving. Guides smooth door operation and alignment.

Center hinge spacer maintains proper door alignment and spacing. Replace if your refrigerator door sags or seal fails. Confirm fit with your model.

Replacement grille for your refrigerator. Installs on the front lower section. Needed when original is cracked, broken, or missing cosmetic cover.

Replaces the lower front trim panel on your refrigerator. Restores a finished look when the original grille is cracked, broken, or discolored.

Covers the kickspace at the bottom of your refrigerator. Replaces a cracked, dented, or missing grille to restore appearance and protect components.

Mounting clip for refrigerators. Secures components in place. Replace if broken, cracked, or missing to restore proper fit and function.

Replace a cracked, broken, or missing grill end cap on your refrigerator. This trim piece installs at the end of the base grille for a finished look.

Decorative end cap that covers the edge of the refrigerator's front grille. Replace if cracked, broken, or missing for a clean, finished look.

This black plastic grille covers the toe kick area at the bottom front of your refrigerator, providing a finished appearance while allowing airflow to the condenser. It replaces a damaged, cracked, or missing lower front cover that may cause poor cooling performance or an unsightly gap.