Parts for Whirlpool WRT3L1SZYB00: 01 - Cabinet Parts

Repair manual for refrigerators and freezers made by Whirlpool. Covered brands include Whirlpool, Sears, Kenmore, Kitchen Aid, Roper, and Estate. Easy to follow photographs and step-by-step repair procedures.

Front cabinet roller wheel for refrigerators. Mounts under the cabinet to allow smooth rolling and positioning. Replace if cracked, broken, or worn out.

Ice maker not filling or water dispenser not working? This water inlet valve controls flow to both. Easy 30-minute DIY fix for most refrigerators.

Replace a cracked, broken, or missing grill end cap on your refrigerator. This trim piece installs at the end of the base grille for a finished look.

Decorative end cap that covers the edge of the refrigerator's front grille. Replace if cracked, broken, or missing for a clean, finished look.

This black plastic grille covers the toe kick area at the bottom front of your refrigerator, providing a finished appearance while allowing airflow to the condenser. It replaces a damaged, cracked, or missing lower front cover that may cause poor cooling performance or an unsightly gap.

Cabinet roller axle supports refrigerator wheels for smooth movement. Replace if rollers wobble or fridge is hard to move. Verify fit with your model.

Replacement screw for securing components inside your refrigerator. Needed when original screws are stripped, lost, or corroded during repairs.

Secures water supply hoses to fittings, preventing leaks in ice makers and refrigerators. Replace when rusted, bent, or losing grip. Verify fit.

This is a replacement 1/4-20 threaded screw used to secure appliance components and panels. It restores proper fastening where a matching screw is missing, loose, or stripped and helps stop rattling or misalignment. What it does:

• Secures panels, brackets, and assemblies to maintain proper alignment and reduce vibration
• Replaces missing or damaged fasteners that cause loose or rattling parts
• Works wherever a 1/4-20 threaded screw is specified by the manufacturer
• Simple mechanical fastener—no electrical or calibration changes required

• Disconnect power to the appliance before servicing to avoid injury
• Use the matching driver and thread engagement; do not overtighten to prevent stripping
• Verify screw length and head type match the original before installing
• If threads are damaged, repair or replace the mating component rather than forcing the screw

Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.

Center door hinge connects and supports refrigerator doors. Replace if bent, broken, or lost during moving. Guides smooth door operation and alignment.

Center hinge spacer maintains proper door alignment and spacing. Replace if your refrigerator door sags or seal fails. Confirm fit with your model.

This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.

Supports the refrigerator door at the bottom pivot point. Replace if your hinge is rusted, bent, cracked, or broken to restore proper door alignment.

Black plastic hole plug endcap for refrigerator interior panels. Covers mounting holes and openings for a finished look. Replaces missing or broken caps.

Color: white.

Grey button plug cap for refrigerators and freezers. Covers screw holes or mounting points on interior or exterior panels. Replace if cracked or missing.

Covers the kickspace at the bottom of your refrigerator. Replaces a cracked, dented, or missing grille to restore appearance and protect components.

Replacement grille for your refrigerator. Installs on the front lower section. Needed when original is cracked, broken, or missing cosmetic cover.

Replaces the lower front trim panel on your refrigerator. Restores a finished look when the original grille is cracked, broken, or discolored.

Small plastic washer that supports the refrigerator door hinge assembly. Replace if worn, cracked, or missing to restore proper door alignment.

Plastic washer that fits between the door hinge and cabinet body. Replace if cracked, worn, or missing to restore smooth door operation and alignment.

Replacement hinge cover cap for refrigerator door. Restores finished appearance after door reversal or replaces cracked, broken, or missing covers.

Replace a cracked or missing refrigerator door hinge cover cap. This plastic cover installs on top of the hinge assembly for a finished look.

This is a black plastic cover that fits over the right-side door hinge on the refrigerator. It provides a finished appearance by concealing the hinge hardware and helps protect the hinge mechanism from dust and debris. Replace this cover if it is cracked, broken, or missing, leaving the door hinge exposed.

Replace your refrigerator's damaged or missing cover cap. This protective cover installs over internal components to restore a finished appearance.

Plastic cover cap for refrigerator installation. Replaces cracked, broken, or missing covers. Snaps into place to provide finished appearance.

This is a grey plastic hinge cover that snaps over the left hinge assembly on the top or bottom of a refrigerator door. It conceals the hinge hardware for a clean, finished appearance. Replace this cover if it is cracked, discolored, or missing, which can leave the hinge exposed to dust and moisture.

This replacement cover-unit restores the appliance's exterior housing and protects internal components from dust and damage. It helps maintain proper fit and appearance while keeping electrical and mechanical parts enclosed for safe operation. What it does:

• Replaces a cracked, warped, or missing housing cover to restore the cabinet's fit and finish
• Shields internal components from dust, lint, and accidental contact
• Helps reduce vibration-related rattles caused by loose or damaged panels
• Restores a secure mounting surface for adjacent panels and controls

• Disconnect power to the appliance before beginning any repair
• Basic hand tools typically required; follow model-specific disassembly steps
• Handle edges carefully to avoid scratches or cuts and to protect painted surfaces

Corrects hinge spacing to realign refrigerator doors and eliminate rubbing or uneven gaps. Replace when doors lean, don't close squarely, or show poor seal contact. Verify fit by model number before ordering.

Plastic end cap that attaches to the side of the refrigerator's front grille. Replace if cracked, broken, or missing for a complete finished look.