Parts for Ge WCVH6800J2BB: 02 - Cabinet & Top Panel Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

EMI filter reduces electrical noise on the appliance's incoming power line to help protect electronic controls and cut down on radio/TV interference. It restores proper power filtering for appliances that show noise-related control issues. What it does:

• Filters electromagnetic and radio-frequency interference on the power input to prevent electrical noise from affecting control boards and sensors.
• Helps reduce visible or audible interference with nearby electronics such as radios, TVs, and audio equipment.
• Can address intermittent control errors, unexpected resets, or erratic operation linked to line noise.
• Provides the correct connection point for the appliance's power input so the control circuitry receives cleaner power.

• Disconnect power at the breaker and unplug the appliance before starting any work. Verify power is off with a tester.
• Match wiring colors and terminal types; secure all connections and route wires clear of moving parts.
• Some installations require removing access or control panels—retain fasteners.

The Water Inlet Valve is an OEM part for GE washing machines. It controls the flow of water into the washer during the fill cycles. The valve opens and closes to allow the correct amount of water to enter the machine based on the selected wash cycle and settings.

You should replace this water inlet valve if it becomes defective. A bad water inlet valve can cause several issues such as improper water levels, slow filling, or no water entering the washer at all. These problems can be due to sediment build-up, electrical faults, or mechanical wear.

Symptoms of a bad water inlet valve include:

• Washer not filling with water
• Slow filling or low water pressure
• Leaking or dripping water from the valve area
• Incorrect water levels in the drum

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Suspension Spring is an OEM part for GE washing machines. It supports the washer tub, helping to absorb vibrations and maintain balance during the wash cycle.

Causes of a bad suspension spring can include wear and tear over time, rust or corrosion due to exposure to moisture, or damage from overloading the washer. 

Symptoms of a bad suspension spring include:

• Excessive shaking or vibrating during the wash cycle
• Loud banging noises
• Washer tub leaning or appearing off-balance
• The washer moving or "walking" during operation

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This spring hanger secures a suspension spring to the washer's cabinet/frame, supporting the tub assembly and helping control vibration. Replace a cracked or broken hanger to restore stable spin performance and reduce banging or shaking.

• Provides the mounting point for a suspension spring that helps carry the tub's weight
• Helps keep the basket balanced and limits vibration during spin
• Failure symptoms can include excessive shaking, loud banging, out-of-balance stops, or a sagging/leaning tub
• Visible cracks, deformation, or broken mounting tabs indicate the hanger should be replaced

• Disconnect power and water supply; access the hanger location per your model's service procedure
• Support the tub and control spring tension with locking pliers; wear gloves and eye protection
• Move the suspension spring to the new hanger and secure it in the same orientation
• Reassemble, level the washer, and run a test spin to verify smooth operation

This top panel pin secures the range's upper/top panel to the appliance frame so the panel stays aligned and stable for safe, reliable use. It's a simple replacement part that restores proper panel fit and reduces rattling. What it does:

• Locks the top/upper panel into position to keep it from shifting or sagging
• Helps eliminate panel movement, noise, and misalignment during use
• Restores a secure fit if the original pin is broken, bent, or missing
• Works as a direct-fit replacement where this OEM pin is specified

• One top panel pin

• Disconnect power to the appliance before any service to avoid shock or injury
• Access may require removing the cooktop or backguard
• Inspect surrounding clips, hinges, and mounting points and replace if damaged

This is a self-tapping appliance screw used to fasten panels and small components. It replaces missing or damaged screws to restore secure fit and reduce rattling or loose parts. What it does:

• Secures trim, panels, brackets or components where a small self-tapping fastener is required
• Restores a tight fit to stop vibration, rattling or misalignment
• Replaces stripped, corroded or lost screws that prevent proper assembly
• Compatible with common appliance sheet-metal and plastic thread-in points

• Use the proper screwdriver or driver bit to avoid stripping the head
• Start threads straight and apply firm, controlled pressure when driving into thin metal or plastic
• Replace with the exact size and type to ensure correct fit and function
• Disconnect power and follow appliance-specific safety instructions before servicing

This top decor cover is the cosmetic trim piece that mounts to the top of your microwave to restore appearance and cover vents and fasteners. It replaces a cracked, bent, missing or dented top trim for a clean, finished look. What it does:

• Covers the top edge of the microwave, hiding vents, screws and mounting brackets
• Restores the appliance's factory appearance after impact or corrosion
• Helps keep dust and debris out of exposed areas under the top panel
• Stops rattling or flapping caused by a loose or warped trim

• Disconnect power to the appliance before starting work.
• Handle edges carefully; trim pieces and surrounding sheet metal can be sharp.
• Removal may require loosening exterior screws or removing adjacent trim pieces.

This front panel pin secures a range or appliance control/front panel to the cabinet, keeping the panel aligned and stable for safe operation. It's a small but important fastener that prevents panel sag and rattles. What it does:

• Secures the front/control panel to the appliance cabinet so the panel stays in place
• Keeps panel edges aligned for a clean fit and proper button/knob operation
• Prevents vibration noise or rattling caused by a loose or broken pin
• A worn or broken pin can allow the panel to move, feel loose, or misalign

• One front panel pin

• Disconnect power to the appliance before beginning any repair
• Typically accessed by removing the console or front panel screws; retain screws and small parts
• Replace the pin carefully to avoid damaging the panel or surrounding trim

This front panel hanger secures the appliance's front service panel to the cabinet, restoring proper alignment and preventing vibration or sag. It's a direct-fit replacement designed to bring panels back to factory position for a clean, stable appearance. What it does:

• Supports and anchors the front service panel to the appliance cabinet
• Keeps the panel aligned to prevent gaps, sagging, or rubbing
• Reduces rattles and vibration caused by a loose or damaged hanger
• Helps the panel latch securely for safe, normal operation

• One front panel hanger

• Disconnect power before beginning any service
• Partial panel removal is typically required; support the panel during replacement
• Inspect surrounding clips and fasteners; replace if worn to ensure a secure fit

This genuine replacement screw secures panels and components on compatible appliances to restore proper fit and reduce vibration or rattling. Use when missing, stripped, or loose fasteners prevent parts from staying in place. What it does

• Fastens trim, panels, or mounting brackets to maintain component alignment
• Restores secure attachment when original screws are missing or damaged
• Helps eliminate noise and vibration caused by loose parts
• Matches the OEM thread profile and length for proper fit

• Use the correct screwdriver or bit to avoid cam-out and damaged heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastic
• Keep spare screws and small parts away from children and pets
• If threads are damaged, replace mating fastener or insert rather than forcing this screw

The Drain Pump Assembly is an OEM part for GE washing machines. This assembly is responsible for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine and into the household drain, allowing the appliance to proceed through its wash and spin cycles without issues.

Causes of a bad drain pump can include blockages from debris or lint, electrical failures, or wear and tear from regular use. A malfunctioning pump can lead to drainage issues, leaving water in the washer and preventing the machine from completing its cycles.

Symptoms of a bad drain pump assembly include:

• Water not draining from the washer
• Unusual noises during the drain cycle
•  The washer stopping mid-cycle due to drainage issues
• Water leaks from the pump area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This inverter connector links the refrigerator's inverter board to the wiring harness, providing a reliable electrical connection to help the inverter and compressor receive power. Use it to replace damaged or corroded inverter-to-harness plugs. What it does

• Provides a secure electrical connection between the inverter board and wiring harness
• Restores proper power flow to inverter-driven compressor systems
• Commonly replaced when connectors are cracked, melted, burned, or have corroded pins
• Can eliminate intermittent operation, error codes, or compressor fail-to-start symptoms related to poor connections

• Disconnect power to the appliance before starting any repair to avoid shock or damage
• Handle PCB and connector pins carefully to avoid bending pins or introducing debris
• Verify connector orientation and full seating; ensure locking tab engages where present

Washing machines create a vibration during the spin cycle that requires a washer damper vibration shock absorber to reduce. When there is excessive movement or shaking with the washing machine in operation, the washer damper vibration shock absorber may be worn out, damaged, or missing. When this occurs, the part must be replaced to prevent further damages to the appliance or surrounding objects. Replacing a washer damper vibration shock absorber is a simple repair. It is located near the bottom of the appliance. Before starting the replacement, unplug the device to prevent possible electrical shock. Wear safety gloves for protection. Make sure the part is secured in place before reassembling and starting the washing machine. When the repair is done correctly, the vibration and movement will noticeably decrease during the spin cycle.This washer damper vibration shock absorber is a genuine OEM replacement part. It is sold individually. The washer damper vibration shock absorber is sourced directly from the manufacturer. The piece is made of durable, high-quality materials. It is compatible with washing machines made by General Electric. Other brands that this replacement part can be installed in include Hotpoint, RCA, Sears, and Kenmore.

A replacement adjustable leveling leg that supports and stabilizes the appliance and helps restore even height for proper door alignment and stable operation. Use this leg when a worn, bent, missing or damaged leg causes rocking, tilting or uneven gaps. What it does:

• Provides stable support and lets you level the appliance on uneven floors
• Restores correct height so doors close and seal properly
• Stops rocking and reduces vibration caused by a damaged or missing leg
• Compatible with models that use this specific OEM leg design

• Disconnect power and remove or secure contents before adjusting or replacing legs
• Raise and support the appliance safely (use a jack or helper) before removing/installing the leg
• Thread or fasten per the appliance mounting points; tighten securely but avoid over-torquing
• For model-specific fit and installation details

This inside drain hose directs defrost and condensation water from the freezer evaporator to the refrigerator drain system, helping prevent pooling and ice buildup. Replaces a worn, clogged, or cracked evaporator drain hose to restore normal drainage. What it does:

• Channels defrost and condensation water away from the evaporator area to the drain pan or tube
• Helps prevent water pooling, ice formation, and water leaks inside the freezer compartment
• Restores proper drainage when the original hose is cracked, split, or clogged
• Works with the appliance's internal drain fittings and clamp connections

• Disconnect power to the appliance before servicing to avoid electrical shock
• Access requires removing interior panels or the evaporator cover; handle evaporator fins and sensors carefully
• Check and clear drain inlet and drain tube of debris when replacing the hose
• Use proper clamps or fasteners and avoid kinks or tight bends that restrict water flow

This outside drain hose directs wastewater from your washer to the household drain. Replace a cracked, kinked, or leaking hose to stop leaks and restore reliable draining at the end of each cycle.

• Routes discharge water from the drain pump to a standpipe, laundry tub, or sink
• Helps maintain proper flow during drain/spin to prevent backups
• Common signs of failure: water leaking behind the washer, slow or incomplete draining, or drain-related error messages
• Visual clues include cracks, pinholes, bulges, or severe kinks

• Disconnect power and water; pull the washer forward for access and place towels/bucket as needed
• Note hose routing and connection points; release clamps and remove the old hose
• Fully seat the new hose; reuse existing clamps/hangers as required. Route without kinks and maintain proper standpipe height
• Run a test drain/rinse and check all connections for leaks

A spring-style drain hose clamp that secures flexible drain tubing to fittings to prevent leaks and hose separation. Durable metal construction keeps drain connections tight for reliable wastewater flow and trouble-free operation. What it does:

• Holds drain hose firmly to pump, elbow or spud to reduce leaks and disconnections
• Applies even compressive force around flexible tubing for a secure seal
• Helps stop water spraying or pooling caused by a loose hose connection
• Commonly used on appliance drain and discharge lines where a snug clamp is required

• One spring-style drain hose clamp

• Use pliers to expand the clamp, fit over the hose, then release to engage; avoid twisting the hose while seating
• Replace any cracked or brittle hose before clamping to ensure a leak-free repair
• Disconnect power and water if required by your appliance before accessing the drain connection

This drain hose coupling joins two sections of a washer's drain hose to create a secure, leak-resistant connection. Replace a cracked or loose connector to help prevent leaks and support proper draining performance. What it does

• Connects two drain hose sections for proper water discharge
• Maintains a tight, sealed joint to help prevent leaks at the hose connection
• Restores a secure hose path if the original coupling is cracked, worn, or missing
• Common symptoms: water on the floor during drain, loose hose connection, or hoses separating

• Drain hose coupling

• Disconnect power and turn off water before servicing; pull the washer forward for access
• Place a towel or pan to catch residual water from hoses
• Loosen hose clamps, remove the old coupling, fully seat both hose ends on the new coupling, and tighten clamps securely
• Run a brief drain/rinse and inspect the connection for leaks

This ST4 x 10 self-tapping screw secures lightweight appliance panels and components, providing a reliable fastener for repairs and maintenance. It's a direct-fit hardware piece commonly used on control panels, trim and internal bracketry. What it does:

• Fastens plastic or thin metal panels and small internal parts without a nut
• Holds control housings, trim pieces, and access panels in place
• Helps stop rattles and loose panels when the correct fastener is installed
• Common replacement when original screws are stripped, missing, or corroded

• Use the correct ST4 screwdriver or compatible bit to avoid stripping the head
• Start threading by hand to ensure alignment before driving with a driver
• Tighten until snug; avoid over-torquing which can crack plastic parts
• Disconnect power and follow appliance safety instructions before servicing

This drain pump filter traps lint, coins, and small debris before they reach the pump, helping your washer drain properly and protecting the pump from damage. Replace a broken or clogged filter if you notice slow draining or a leak at the filter access.

• Screens out debris before it reaches the drain pump
• Helps maintain proper draining performance
• Common symptoms of a failed or missing filter: not draining/slow drain, leak at the filter access, or pump noise from debris
• Prevents hard objects from entering the pump and causing damage

• Disconnect power and turn off water before servicing
• Expect residual water; place towels or a shallow pan under the filter area
• Access the filter, unscrew and remove the old filter, and clear any debris from the housing
• Install the new filter and hand-tighten to seal; run a short drain cycle and check for leaks

A small sheet-metal screw used to secure panels and components on compatible GE appliances. Replaces worn or missing fasteners to restore proper fit and stop loose or rattling parts. What it does

• Secures appliance panels, brackets or trim to the cabinet or frame
• Keeps components aligned so doors, panels and controls operate correctly
• Common symptom: loose or rattling panels or trim
• Common symptom: parts that shift or detach during use

• One screw

• Use the correct sized Phillips screwdriver; start threading by hand to avoid cross-threading
• Tighten until snug — avoid over-torquing which can strip threads or crack panels
• Replace only with the same size and thread type for secure fit
• Disconnect power where applicable and follow appliance safety guidance before servicing

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.