Parts for Ge WCVH6800J2BB: 04 - Tub & Motor Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

Small self-tapping screw used to secure appliance panels and internal components. Replaces worn or missing fasteners to restore proper fit and alignment for covers, brackets, and trim pieces. What it does

• Secures sheet-metal panels, brackets or trim to the appliance chassis
• Replaces stripped, corroded or missing screws that allow rattling or loose parts
• Helps restore proper panel alignment and prevents vibration noise
• Works where a self-tapping thread is required in thin metal or plastic mating parts

• Power off and unplug the appliance before servicing
• Use the correct screwdriver bit to avoid cam-out and head damage
• Start threads straight and drive carefully—do not overtighten to avoid stripping
• Replace like-for-like; match screw length and thread type to the original

A spring-style drain hose clamp that secures flexible drain tubing to fittings to prevent leaks and hose separation. Durable metal construction keeps drain connections tight for reliable wastewater flow and trouble-free operation. What it does:

• Holds drain hose firmly to pump, elbow or spud to reduce leaks and disconnections
• Applies even compressive force around flexible tubing for a secure seal
• Helps stop water spraying or pooling caused by a loose hose connection
• Commonly used on appliance drain and discharge lines where a snug clamp is required

• One spring-style drain hose clamp

• Use pliers to expand the clamp, fit over the hose, then release to engage; avoid twisting the hose while seating
• Replace any cracked or brittle hose before clamping to ensure a leak-free repair
• Disconnect power and water if required by your appliance before accessing the drain connection

A small M5 x 12 machine screw used to secure panels and components in compatible appliances. Simple, serviceable hardware that helps restore proper fit and stops rattling or loose parts. What it does:

• Fastens panels, brackets, or components where an M5 x 12 machine screw is specified
• Restores secure attachment when original screw is missing, loose, or damaged
• Helps eliminate vibration noise and misalignment caused by loose hardware
• Fits into pre-tapped holes designed for M5 machine-threaded fasteners

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or hex driver to avoid stripping the head
• Install straight and tighten snugly; avoid over-tightening which can strip threads or crack plastic
• If threads are damaged, replace the mating fastener or insert as needed before reuse

This M8 hex nut is a standard threaded fastener used to secure components and panels. It restores proper clamping force for connections that have come loose, helping eliminate movement and intermittent contacts. What it does:

• Secures bolts, studs, and mounting hardware to hold parts and assemblies in place
• Restores tight mechanical connections that can prevent rattling or misalignment
• Helps maintain electrical grounding and stable joins where a nut is required
• Commonly used wherever an M8 threaded connection is specified by the manufacturer

• One M8 hex nut

• Disconnect power to the appliance before servicing; follow all safety guidelines
• Replace only with the correct size and thread type for a safe fit
• Hand-start threads to avoid cross-threading, then tighten to appropriate torque (do not overtighten)
• If the nut fastens components related to gas, water, or electrical systems, ensure those utilities are turned off and tested according to local codes

This flat metal washer provides a simple, durable spacer or load distributor for fasteners on select GE clothes washers. It helps maintain secure connections and proper spacing to prevent loosening and uneven loading during operation. What it does

• Distributes bolt or screw pressure to protect mating surfaces and prevent pull-through
• Maintains correct spacing and alignment for assemblies that use small fasteners
• Helps reduce loosening from vibration that can cause noise or misalignment
• Commonly used where a thin, durable washer is needed in washer assemblies

• Disconnect power and unplug the appliance before starting any repairs
• Turn off water supply when working near water lines or tub assemblies
• Use the correct size fastener and torque to avoid over-compressing the washer
• Inspect mating parts for damage and replace any worn hardware to ensure a secure repair

This gasket nozzle washer is a small rubber seal that fits at a spray/nozzle connection to help prevent leaks and ensure proper water flow. Replacing a worn gasket restores a secure seal and reduces dripping or pooling. What it does:

• Seals the connection at a spray nozzle or outlet to help stop leaks
• Maintains correct water flow through the nozzle for effective spraying
• Commonly replaces hardened, cracked, or flattened gaskets that allow dripping
• Helps eliminate minor water pooling or visible leaks near the nozzle area

• Turn off power and water supply to the appliance before servicing
• Remove the nozzle or fitting per the manufacturer's instructions; replace the old gasket with the new washer, ensuring it seats evenly
• Inspect mating surfaces for debris or damage before reinstalling

The Door Boot Seal is an OEM part for GE washing machines. This seal is positioned around the door opening of front-load washers, creating a watertight barrier that prevents water from leaking during wash cycles. It also helps to reduce noise and vibration, ensuring smooth and efficient operation.

Over time, the door boot seal can deteriorate due to constant exposure to water, detergent, and the high temperatures of washing cycles. If the seal becomes damaged, it can lead to leaks, mold growth, and decreased washing performance.

Symptoms of a bad door boot seal include:

• Water leaking from the front of the washer
• Mold or mildew buildup on the seal
• Unpleasant odors from the washer
• Visible tears, cracks, or warping of the seal

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

For the door boot to tub clamp order WH01X10277. For the door boot to front spring clamp order WH01X10279.

This rear counterweight helps restore proper balance to the appliance door or panel so it opens and closes smoothly and stays in position during use. It's a direct-fit replacement designed to match the original component. What it does:

• Balances the door/panel to reduce sagging and uneven movement
• Restores smooth opening and closing motion
• Helps stop unwanted rattling or shifting during operation
• Works with the original bracket and fasteners to maintain correct alignment

• Disconnect power (and water if applicable) before beginning service
• Support the door or panel while removing the old counterweight to prevent drop or injury
• Remove and reuse factory fasteners unless replacements are provided; tighten securely to OEM torque

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This vent hose directs dryer exhaust from the appliance to the home vent, helping remove moisture and lint so clothes dry efficiently and the dryer runs safely. It replaces a worn or damaged exhaust connection. What it does

• Channels hot, moist air from the dryer to the exterior vent to prevent moisture buildup.
• Helps reduce drying times when unrestricted and properly installed.
• Prevents lint accumulation at the appliance connection when intact.
• Common symptom: longer drying cycles or dryer overheating when the hose is crushed, disconnected, or damaged.
• Common symptom: visible lint buildup around the dryer outlet or exhaust connection.

• One vent hose.

• Disconnect power (and gas, if applicable) before servicing the dryer.
• Inspect clamps and the vent path; replace any damaged clamps or crushed ducting.
• Avoid sharp bends or kinks; maintain a smooth, short run for best airflow.
• Wear gloves to protect hands from sharp edges and lint; follow all manufacturer safety instructions.

GE Front load washer drum belt. Size: 48.4 inches at rest postion and 51.2 inches when working.

This motor assembly kit replaces a worn or failed motor to restore proper mechanical drive and motion in the appliance. It's a direct-fit replacement designed to match the original assembly's form and function. What it does:

• Replaces the appliance's motor assembly to restore spinning, stirring, or drive motion
• Stops symptoms like no movement, intermittent operation, or unusual humming from the motor area
• Restores correct mechanical linkage between the motor and driven components
• Matches OEM fit and mounting points to simplify replacement

• One motor assembly kit (single complete motor assembly)

• Turn off power to the appliance at the breaker or unplug before beginning any repair
• Follow OEM disassembly steps to access the motor area; keep fasteners and small parts organized
• Handle electrical connectors carefully; wiring matches diagrams before re-energizing

This pressure hose clamp secures the small vacuum/pressure hose to its fitting, keeping the hose in place so the appliance can accurately sense water level and cycle pressure. Simple, direct replacement for a worn or loose clamp. What it does:

• Holds the pressure/vacuum hose snugly to prevent leaks or hose detachment
• Helps maintain proper pressure signal for correct cycle and fill operation
• Commonly used when a loose or damaged clamp causes intermittent pressure-related symptoms
• Small replacement part that restores a firm hose connection

• Disconnect power (and water, if applicable) before servicing the appliance
• Use a small screwdriver or pliers to remove the old clamp and secure the new clamp in place
• Ensure the hose is fully seated on the fitting before tightening the clamp

This heater support stabilizes and secures the heating element assembly to keep the heater properly positioned for safe, efficient operation. Replaces a damaged or broken support to reduce rattling and prevent heater misalignment. What it does:

• Holds the heating element assembly in place so it stays aligned during operation
• Prevents the heater from contacting other components, reducing noise and wear
• Helps maintain proper airflow around the heater for consistent heat output
• Commonly replaced when cracked, warped, or missing mounting tabs

• Disconnect power to the appliance before starting any repair
• Inspect surrounding parts (heater, clips, wires) and replace any damaged items
• Use basic hand tools; handle the heater element carefully to avoid damage

The Inner Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp secures the door boot seal, ensuring it stays in place and forms a watertight barrier between the washer door and drum.  

Causes of a bad clamp can include regular wear and tear, corrosion from detergent and water exposure, or physical damage from rough handling. 

Symptoms of a bad inner door boot seal clamp include:

• Water leaking from the front of the washing machine
• The door boot seal coming loose or not staying in place
• The washing machine door not closing properly
• Visible rust or damage on the clamp

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Outer Door Boot Seal Clamp is an OEM part for GE washing machines. This clamp ensures that the seal is tightly held in place, preventing water from leaking out of the front load washer during operation.  

Causes of a bad Outer Door Boot Seal Clamp can range from corrosion due to exposure to moisture and detergents, to physical damage from improper installation or removal of the door seal.  

Symptoms of a malfunctioning Outer Door Boot Seal Clamp include:

• Water leaking from the front of the washing machine
• The door boot seal coming loose or detaching from the front panel
• Visible damage or corrosion on the clamp, compromising its integrity

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.