Parts for Ge GFD55ESPN0DG: Cabinet & Top Panel Parts

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Ground Screw is an OEM part for GE dryers. It ensures proper grounding and electrical safety for your dryer. This screw securely connects the ground wire to the dryer chassis, providing a path for electrical current to safely discharge in the event of a fault or power surge.

A bad Ground Screw can lead to electrical issues and potential safety hazards. Causes of a bad Ground Screw can include corrosion, loose connections, or damage due to accidental mishandling or improper installation.

Symptoms of a bad Ground Screw include:

• Intermittent dryer operation
• Visible signs of damage or deterioration on the screw or ground wire
• Tripped circuit breakers or blown fuses

Replace your faulty or damaged Ground Screw with this genuine OEM GE part to ensure proper grounding and electrical safety for your dryer. 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This Leveling Leg is an OEM replacement part for GE washing machines and dryers. It plays an essential role in maintaining the stability and balance of the appliance. This leveling leg is designed to withstand the weight and vibrations of the machine, ensuring it remains level and operates smoothly.

Over time, leveling legs can wear down, become damaged, or lose their ability to adjust properly due to constant vibrations, uneven flooring, or shifting of the appliance. An unbalanced appliance can lead to inefficient operation, increased wear and tear, and potential safety hazards.

Symptoms of a bad Leveling Leg include:

• The appliance is unstable or wobbles during operation.
• Excessive noise or vibration more than usual.
• Difficulty in aligning the appliance level on the floor.
• Visible wear or damage to the leveling leg.
• The appliance tilts or leans to one side.

This GE OEM replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This access panel covers the service opening to protect internal components and allow safe access for diagnostics and repairs. It restores a clean exterior finish and helps keep dust and debris out of the appliance. What it does:

• Covers the service/service access opening so controls and components stay protected
• Provides a safe access point to inspect or replace internal parts
• Helps prevent dust, lint, and small objects from entering the appliance interior
• Restores the appliance's exterior appearance after servicing

• Disconnect power (and gas, if applicable) before removing or installing the panel
• Typical installation uses basic hand tools (screwdriver); keep fasteners from the original panel
• Wear gloves to avoid injury from sheet metal edges

This small replacement panel clip secures a trim or cabinet panel to the appliance, restoring proper fit and preventing gaps or movement for a cleaner appearance and quieter operation. What it does

• Holds a trim or cabinet panel in place to maintain alignment and fit
• Prevents panel rattling or vibration during normal operation
• Replaces broken or missing clips that cause loose or sagging panels
• Helps maintain a finished look and keeps panels from shifting

• One panel clip

• Disconnect power or follow safety lockout procedures before removing panels near electrical components
• Remove the affected trim or panel per the manufacturer service instructions to access clip locations
• Clip typically installs by snapping or pressing into the panel or cabinet; replace all damaged clips for uniform fit

The Terminal Block is an OEM part for GE dryers. This part is a connection point for the power supply, allowing electricity to flow into the dryer and power its various functions. The terminal block ensures a secure and reliable electrical connection. It is responsible for distributing power to components such as the motor, heating element, and controls, enabling the dryer to operate effectively.

A bad terminal block can occur due to wear and tear, loose connections, or electrical malfunctions. If you notice symptoms such as intermittent power loss, sparks or burning smells near the terminal block, or difficulty in turning on the dryer, it may be time to replace this part.

Symptoms of a bad terminal block include:

• Intermittent power loss
• Sparks or burning smells near the terminal block
• Difficulty in turning on the dryer

Restore the proper functioning of your GE dryer by replacing the faulty terminal block with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A replacement screw used to secure a terminal block to the appliance chassis, restoring a stable electrical connection and eliminating loose or wobbly terminals. Simple hardware part for reliable terminal mounting. What it does:

• Secures the terminal block to the appliance frame so wiring stays in place
• Helps maintain tight electrical contact at power terminals
• Can prevent intermittent power, arcing, or loose-wire symptoms when the screw is worn or missing
• Compatible with terminal-block style connections on many appliances

• Always disconnect power at the breaker or unplug the appliance before servicing
• Use the correct screwdriver or driver bit to avoid stripping the screw head
• Tighten until snug—do not overtighten and avoid deforming the terminal block
• If wiring or terminals are damaged, replace or repair those parts before restoring power

This terminal block nut secures wiring to the appliance's terminal block, restoring a solid electrical connection for safe, reliable power delivery. Ideal when a terminal nut is missing, stripped, or damaged. What it does

• Secures ring or spade terminals to the appliance terminal block for correct electrical contact
• Replaces a stripped, rounded, or corroded nut that causes loose or intermittent power
• Helps prevent arcing and overheating at high-current connections
• Restores proper fastening after service or wire replacement

• Always disconnect power at the breaker or unplug the appliance before servicing
• Match nut size and thread to the existing terminal stud before installation
• Thread onto the terminal stud and tighten securely with hand tools; avoid over-tightening to prevent damage
• Verify all connections are snug and restore power to test operation

Size: 8 - 18 ab.

This terminal block cover protects the appliance's electrical terminal block by enclosing wiring connections to reduce exposure and help prevent accidental contact. It restores the factory safety shield for safe operation. What it does:

• Shields high-voltage terminal connections from accidental contact
• Helps keep wiring routed and secured at the terminal block
• Reduces risk of shorting or arcing near the connection points
• Useful when replacing or servicing terminal block wiring or power cords

• One terminal block cover

• Always disconnect power at the breaker or unplug the appliance before working on electrical components
• Remove the appliance access panel to reach the terminal block, then place the cover over the terminals and fasten with the original screws
• Ensure all terminal connections are tight and properly insulated before restoring power

This safety thermostat monitors dryer inlet air temperature and opens if heat rises too high, protecting the appliance from overheating. Replacing a failed backup thermostat restores proper temperature protection and helps prevent heat-related shutdowns.

• Sits on the inlet air duct as a secondary high-limit safety
• Opens on excessive temperature to cut power to the heating circuit
• Common failure signs: dryer runs but won't heat, shuts off on high heat, or stops mid-cycle and restarts after cooling
• Test continuity when cool vs. hot

• Disconnect power (and gas, if applicable) before service
• Allow the dryer to cool fully; access is typically from the front or rear panel
• Transfer wires one at a time to the new thermostat; note orientation
• Do not bend the sensing disc; ensure tight mounting for proper temperature sensing

This electric heating element assembly restores proper heat in your electric dryer so clothes dry evenly and on time. It replaces a failed heater that causes long dry times or no heat.

• Generates and regulates the electric heat used during drying cycles
• Common failure signs include no heat, very long dry times, and clothes remaining damp after a full cycle
• Can help resolve tripping of thermal cut-off caused by a shorted element
• Restores consistent drying performance when the original heater burns out

• Unplug dryer and disconnect power before service
• Access is typically from the rear or front panel depending on model
• Transfer any reusable hardware and wiring in the same positions
• After installation, run a test cycle to ensure proper heating and airflow

This dryer high-limit thermostat is the safety cutoff for the heating circuit. When internal temperature exceeds its limit, it opens the heater circuit to prevent overheating, protecting components and helping ensure safe, reliable drying operation.

• Monitors temperature near the heater and opens the heating circuit at a preset safety threshold
• Helps prevent overheating that can damage internal components
• Common symptoms of a faulty thermostat: dryer runs but no heat, overheating or hot/burning odor, heat that cycles off too quickly or frequent shutoffs
• If stuck open, the dryer will not heat

• Disconnect power before service; for gas models, also shut off the gas supply
• Access and replace per your model's diagram; move wires from the old thermostat to the new one one-at-a-time
• After replacement, clear lint and verify proper airflow/venting—restricted airflow commonly causes overheating

This main wiring harness routes power and signals between the oven's control, terminal block and internal components to restore reliable electrical connections and appliance operation. Designed for direct replacement in compatible electric ranges. What it does:

• Connects the control board, terminal block and internal components for proper power and signal flow.
• Re-establishes lost or intermittent electrical connections caused by damaged or frayed wires.
• Helps resolve symptoms like elements or controls that don't receive power, intermittent operation, or visible wiring damage.
• Fits where the factory harness is located behind the oven control or console.

• Disconnect power at the breaker before servicing to avoid shock or injury.
• Compare the harness connectors and routing to the original part for correct fit before installation.
• Handle connectors gently; avoid pulling on individual wires when installing or removing.