Parts for Ge GFT14ESSL0WW: Cabinet & Top Panel Parts

These front panel screws secure the appliance's front panel to the chassis, restoring proper fit and appearance. Replace stripped or missing screws to stop panel rattling and uneven gaps. What it does:

• Fastens the front panel to the appliance frame for a secure fit
• Prevents panel vibration, rattling, and misalignment during operation
• Replaces corroded, stripped, or lost fasteners that keep the panel loose
• Helps maintain proper access to controls and internal components

• Front panel screws

• Disconnect power before servicing to avoid electrical shock
• Use the correct size screwdriver to avoid stripping screw heads
• Thread screws in by hand first, then tighten snugly—do not overtighten
• Keep removed hardware organized for reassembly

This is a ST3.5 x 12 self-tapping screw designed to secure trim, panels, and small appliance components. It replaces stripped or missing screws to restore proper fit and reduce movement or vibration. What it does:

• Fastens appliance panels, brackets, or trim where ST3.5 x 12 screws are specified
• Helps stop rattling, loose panels, or parts that shift during operation
• Provides a secure threaded hold in thin sheet metal or plastic mounting points
• Matches OEM fit where the WH02X26267 screw is specified

• Use the properly sized Phillips driver to avoid cam-out and head damage
• Start screws straight and apply steady pressure; do not over-torque to prevent stripping
• Wear eye protection when working with small fasteners and sharp edges
• Compare size and thread to ensure a proper match

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

This electronic control board manages the oven's user controls, display, and timed cooking functions so your oven responds correctly to touch commands and follows programmed bake/broil cycles. Replacing a faulty board restores reliable control and display operation. What it does:

• Receives inputs from the front control panel and runs oven bake/broil and timed operations
• Powers and updates the digital display and clock so settings and time are visible
• Helps regulate heating cycles by sending signals to the oven's relay/element circuits
• Commonly replaces failures that cause a blank display, unresponsive buttons, incorrect timing, or inability to start cooking

• One electronic control board

• Disconnect power at the breaker before starting—electrical shock is possible even when the appliance appears off
• Handle the board by its edges; avoid touching components or connector pins to prevent static or contamination damage
• Verify all wire connectors seat fully and match original locations; take photos before disassembly for reference

This water reservoir tank stores and supplies water to the dispenser/ice system, restoring normal water flow and ice production. Designed to match OEM fit, it replaces a cracked, leaking or empty reservoir to stop leaks and filling problems. What it does

• Holds and channels water to the dispenser and/or ice-making components.
• Restores proper water supply when a cracked or damaged tank causes leaks.
• Helps resolve slow or no-fill symptoms with the ice maker or dispenser.
• Maintains sealed water routing to prevent internal leaks and water damage.

• Disconnect power and turn off the water supply before starting.
• Drain remaining water from the system to avoid spills.
• Handle and seat the tank carefully to avoid cracks; use OEM fasteners and gaskets if applicable.

This terminal block cover encloses the dryer's rear power-cord connection. Replacing a missing or damaged cover keeps wiring protected and helps prevent accidental contact with the terminals.

• Covers and shields the terminal block and cord connections at the back of the dryer
• Helps keep dust, debris, and fingers away from live electrical terminals
• Restores proper enclosure when the original cover is broken, warped, or missing
• Common symptoms: missing/broken cover, exposed connections, cover will not stay secured

• Disconnect power by unplugging the dryer or switching off the circuit breaker
• Access the rear of the unit; remove the old cover and retain hardware if reusable
• Position the new cover over the terminal block and secure with the appropriate fasteners per the product manual
• Ensure cord strain relief and connections are properly secured before restoring power

This drum ground strap connects the dryer drum to the chassis to maintain proper grounding and reduce electrical arcing. It helps keep the drum electrically tied to the cabinet for safer operation and quieter performance. What it does:

• Provides a low-resistance path between the drum and dryer cabinet to prevent static buildup and arcing.
• Helps stop intermittent sparks or small electrical shocks when touching the drum.
• Reduces burning or hot-spot odors caused by poor drum-to-chassis electrical contact.
• Restores proper grounding after rust, wear, or a damaged strap causes loss of continuity.

• One drum ground strap

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Access typically requires removing the dryer front panel or drum; use proper tools and follow service manual guidance.
• Secure both terminals tightly to clean, bare metal contact points to ensure good electrical continuity.

This heater assembly generates the heat required for an electric dryer to dry laundry. Replacing a failed heating element restores proper temperature and airflow, helping eliminate no-heat complaints and long dry times.

• Produces heat inside the dryer's air path to remove moisture from clothes
• Works with thermostats and controls to maintain target temperatures
• Common failure symptoms: no heat, extended dry times, drum tumbles but air stays cool
• May show visible breaks or burn spots on the element coil

• Disconnect power before servicing and allow the unit to cool
• Take photos of wiring and move connectors one at a time to the new assembly
• Access is typically from the rear panel; use gloves and caution around sharp edges
• Clear lint and verify venting/airflow after replacement to prevent repeat failures

A small mounting clip that secures trim, panels, or wiring harnesses to appliance frames to restore proper fit and reduce rattles. Replaces a lost or broken retainer so parts stay aligned and stable during use. What it does

• Secures plastic trim, panels, or wire harnesses to the appliance frame to prevent shifting or sagging
• Stops rattling or vibration caused by loose panels or components
• Helps maintain proper alignment of parts for reliable operation
• Simple plastic/metal retainer used wherever a small fastener clip is required

• Disconnect power to the appliance before attempting any repair to avoid electrical shock
• Access the area by removing the minimal surrounding trim or panels as needed
• Press or snap the clip into the matching slot or stud until it locks; replace any damaged mating hardware

This condenser housing drain tube redirects condensation from the condenser housing to the drain channel, helping prevent pooling and water leaks inside the appliance. Fits in the lower condenser area and connects directly to the housing outlet. What it does:

• Channels condensate away from the condenser housing to the drain system to reduce standing water
• Helps prevent water from dripping onto components or collecting under the appliance
• Commonly replaced when original tube is cracked, clogged, or leaking
• Compatible with condenser housings that use a routed drain tube connection

• Disconnect power to the appliance before servicing to avoid electrical hazards
• Access typically requires removing lower kick panel or rear access panel
• Ensure tube is seated and secured at both the housing outlet and drain connection to prevent leaks
• Replace with the exact part number to maintain fit; inspect surrounding seals and clips and replace if damaged

This condenser tank overflow tube routes excess condensate from the condenser area to the drain pan, helping prevent water pooling under the cabinet. Replace a cracked or clogged tube to restore proper condensate drainage. What it does:

• Channels condensate away from the condenser tank to the drain pan to avoid floor leaks
• Prevents water from pooling or running into cabinet bottom or onto the floor
• Helps reduce ice buildup from redirected or standing water around the condenser
• Works with the refrigerator's existing drain path and collection pan

• Disconnect power to the appliance before servicing; shut off the water supply if needed
• Inspect adjoining seals, clips, and drain pathways for damage or obstructions and clean as required
• Ensure the tube is seated and secured in its mating fittings to prevent leaks
• Test operation by running a short defrost/condensate cycle or pouring water into the area to ensure proper drainage

This top panel guide pin screw secures the appliance top panel and keeps the panel aligned during use. It replaces a missing or damaged guide screw to reduce panel movement and rattling. What it does:

• Secures the top panel to the chassis so the panel stays aligned
• Prevents the top panel from shifting, vibrating, or rubbing during operation
• Restores proper fit after a stripped, lost, or damaged screw

• Disconnect power to the appliance before starting any repair
• Remove the top panel or access panel to reach the guide pin location
• Install by hand to align, then tighten snugly with the appropriate screwdriver; avoid over-tightening to prevent strip-out
• If threads are damaged, inspect the mounting hole and replace or repair the threaded insert as needed

This humidity sensor and harness assembly detects moisture levels inside the appliance and delivers reliable signal feedback to the control board so the appliance can regulate humidity-sensitive functions and preserve stored items. What it does:

• Senses interior humidity and sends signal to the control module for proper humidity management
• Helps the appliance maintain fresher conditions in humidity-controlled compartments
• Commonly replaced when humidity-related controls stop responding or readouts are inconsistent
• Works as the electrical interface between the sensor element and the main wiring harness

• One humidity sensor with attached harness assembly

• Disconnect power to the appliance before starting any repair to avoid electric shock
• Handle the sensor and connector carefully to avoid bending pins or damaging the harness
• Verify connector orientation and secure clip engagement; route the harness away from moving parts
• Test the control board and related dampers/actuators if symptoms persist after replacement.

The Rear Bearing is an OEM part for GE electric dryers. Located at the rear of the drum assembly, it supports rotational movement during tumbling cycles. 

As a moving part subjected to prolonged spinning, normal wear affects bearing operation over time. Degraded lubrication or component damage increases friction and compromises function.

Symptoms of a faulty rear bearing include:  

• Grinding or grinding noises emerging from the rear drum area
• Resistance to smooth, efficient drum rotation  
• Potential damage or failure of other interconnected components

Causes are typically from standard wear and accumulation of lint/dust over extended usage periods. Impacts may also prematurely affect bearing integrity on occasion.

This genuine GE replacement bearing restores smooth, quiet operation. Compatible with some Hotpoint, RCA, and select Kenmore dryers.

This ground screw secures an appliance's chassis grounding connection to ensure a reliable electrical ground and help reduce the risk of shock or electrical faults. Simple replacement when the original screw is missing, damaged, or corroded. What it does:

• Fastens the appliance ground wire or grounding strap to the metal chassis for a secure electrical ground.
• Restores a proper grounding point when the original screw is loose, stripped, corroded, or missing.
• Helps address symptoms related to poor grounding, such as intermittent power, electrical noise, or tripped breakers (as reported).
• Provides a direct, stable connection that supports safe appliance operation.

• One ground screw

• Disconnect power to the appliance before attempting any repairs to avoid electrical shock.
• Tighten to snug contact with the chassis; avoid overtightening which can strip threads or damage the metal.
• If ground wire or chassis threads are damaged, inspect for necessary additional parts or repair.