Parts for Ge GFT14ESSL0WW: Front Panel Parts

This Door Switch is an OEM part for GE dryers. This switch is designed to detect the state of the dryer door, allowing the appliance to operate only when the door is securely closed. This safety mechanism prevents the dryer from running with an open door, which could pose risks and reduce efficiency. 

The need to replace the door switch can arise from mechanical wear, damage from frequent usage, or electrical faults. A faulty door switch can lead to several operational issues in the dryer.

Symptoms of a bad Door Switch include:

• The dryer not starting or operating, despite the door being closed.
• The dryer continues to run when the door is opened.
• Intermittent stopping or starting of the dryer during cycles.
• Unusual behavior or responses from the dryer when the door is interacted with.

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This guide post screw secures a guide post or mounting bracket inside the appliance, keeping moving parts aligned and stable. Replacing a missing or damaged screw restores secure attachment and reduces unwanted movement or noise. What it does:

• Fastens a guide post or bracket to hold trim, drawer, or moving components in place.
• Keeps parts aligned so doors, drawers or internal assemblies track smoothly.
• Replacing a stripped or missing screw can stop rattling, looseness or parts shifting during operation.
• Small hardware solution for restoring secure mounting where the original screw is damaged or lost.

• Disconnect power before accessing internal components to avoid shock or injury.
• Use the correct screwdriver and size to avoid stripping the head.
• Thread into place carefully and tighten snugly; avoid over-tightening which can strip threads or crack plastic.
• Replace the guide post or mating hardware as well if threads or the mating post are damaged.

These front panel screws secure the appliance's front panel to the chassis, restoring proper fit and appearance. Replace stripped or missing screws to stop panel rattling and uneven gaps. What it does:

• Fastens the front panel to the appliance frame for a secure fit
• Prevents panel vibration, rattling, and misalignment during operation
• Replaces corroded, stripped, or lost fasteners that keep the panel loose
• Helps maintain proper access to controls and internal components

• Front panel screws

• Disconnect power before servicing to avoid electrical shock
• Use the correct size screwdriver to avoid stripping screw heads
• Thread screws in by hand first, then tighten snugly—do not overtighten
• Keep removed hardware organized for reassembly

This is a ST3.5 x 12 self-tapping screw designed to secure trim, panels, and small appliance components. It replaces stripped or missing screws to restore proper fit and reduce movement or vibration. What it does:

• Fastens appliance panels, brackets, or trim where ST3.5 x 12 screws are specified
• Helps stop rattling, loose panels, or parts that shift during operation
• Provides a secure threaded hold in thin sheet metal or plastic mounting points
• Matches OEM fit where the WH02X26267 screw is specified

• Use the properly sized Phillips driver to avoid cam-out and head damage
• Start screws straight and apply steady pressure; do not over-torque to prevent stripping
• Wear eye protection when working with small fasteners and sharp edges
• Compare size and thread to ensure a proper match

This tapping screw is a self-tapping fastener used to secure panels and components on compatible appliances, restoring secure mounting and preventing loose or vibrating parts. It's a direct replacement for a single factory screw. What it does:

• Threads into sheet metal or plastic mounting points to hold panels, brackets, or small components
• Replaces missing or stripped screws that cause loose panels or rattling
• Helps restore proper alignment and secure connections for controls and covers
• Works where a self-tapping fastener is required instead of a machine screw

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid cam-out and head damage
• Start threading by hand to ensure proper engagement, then tighten until snug — do not over-torque
• Replace only with the exact part to ensure fit and proper fastening

A small replacement housing screw that secures appliance panels and brackets, restoring proper fit and preventing rattles or loose panels. Fits common appliance housings where a short ST4 x 12 self-tapping screw is required. What it does:

• Fastens housing panels, trim, or internal brackets to maintain proper alignment and reduce vibration
• Replaces missing or damaged screws that cause loose or rattling panels
• Works with sheet metal and plastic mounting points designed for ST4 thread size
• Small, low-profile head designed for appliance interiors

• One housing screw (ST4 x 12)

• Disconnect power before servicing the appliance and work on cool surfaces
• Use the correct screwdriver or bit to avoid stripping the head
• Install gently and avoid overtightening to prevent thread or panel damage