Parts for Ge GTD33GASK0WW: Cabinet & Top Panel Parts

This factory screw secures dryer panels and internal components, keeping assemblies tight and aligned so the machine operates safely and without vibration or rattling.

• Fastens sheet-metal panels, brackets, or trim to the dryer cabinet/frame
• A loose or missing screw can cause panel vibration, noise, or misalignment
• Helps restore stability after service or when original hardware is lost
• Typical symptoms include rattling, loose panels, or gaps in trim

• Unplug the dryer before servicing
• Keep track of original screw locations and lengths; replace like-for-like
• Start screws by hand to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, inspect mating hole or clip before installing

This leveling leg threads into the base of your appliance to provide a stable, adjustable footing. Replacing a worn or missing leg helps keep the cabinet level, reducing vibration and noise for smoother, safer operation.

• Adjusts height so the unit can be leveled on uneven floors
• Maintains solid floor contact to minimize rocking or walking
• Helps reduce vibration and rattling noises during operation
• Signs you need this part: appliance wobbles, sits unevenly, or a foot is missing/damaged

• Disconnect power; for gas units, also shut off the gas supply
• With assistance, carefully tilt or raise the appliance to access the leg
• Unscrew the old leg and thread in the new leg by hand; use a wrench if needed
• Level the unit front-to-back and side-to-side; ensure all legs firmly contact the floor

The Cover Top Low Depth is an OEM replacement part for GE dryers. It is designed to fit securely on top of the dryer, providing protection and a finished appearance.

Symptoms of a faulty top cover panel include:

• Visible cracks or fractures on the panel
• Loose or unstable fit on top of the dryer
• Impaired protection against dust and debris

A bad top cover panel can occur due to wear and tear over time, accidental damage, or exposure to harsh conditions. If you notice signs of damage such as cracks, discoloration, or a loose fit, it may be time to the old or damaged top cover panel with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint and RCA models.

A genuine replacement mounting screw used to secure appliance panels and trim pieces. Replaces a single worn, stripped or missing fastener to restore proper fit and prevent rattling or loose components. What it does:

• Secures panels, brackets or trim to the appliance frame
• Stops rattling or vibration caused by loose or missing screws
• Restores proper alignment when existing fasteners are stripped or damaged
• Matches OEM fit and thread for reliable fastening

• Disconnect power to the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten — snug until secure to prevent thread damage
• Keep removed hardware organized to ensure correct reassembly

This replacement side panel restores the exterior cabinet surface and protects internal components from dust and damage while keeping the appliance looking finished. It matches OEM fit and finish for a seamless appearance. What it does:

• Replaces a dented, scratched, or corroded cabinet side to restore the appliance's exterior
• Shields wiring, insulation, and internal components from accidental contact and debris
• Helps maintain proper airflow gaps and enclosure integrity where applicable
• Improves overall appearance for a like-new look

• One replacement side panel

• Disconnect power (and water if applicable) before starting any repair
• Remove trim, screws, or mounting clips securing the existing panel; retain fasteners unless replacements are provided
• Align the new panel carefully and secure with the original mounting hardware

This 120V replacement power cord restores household current to gas ranges and ovens that use a corded connection for clocks, lights, igniters and controls. It provides a straightforward way to replace a damaged or worn cord and regain safe power to the appliance. What it does

• Supplies 120-volt power from the wall outlet to the range/oven's control system, clock and lights.
• Restores ignition and control functions when a frayed or broken cord prevents the appliance from receiving power.
• Replaces cords that show signs of burning, cracking, loose connections, or exposed wiring.
• Reduces risk of electrical faults caused by damaged insulation or terminals.

• One 120V power cord

• Disconnect power at the circuit breaker or unplug the appliance before starting; ensure the appliance is de-energized.
• Route and secure the cord to avoid pinching; tighten terminal screws to manufacturer torque recommendations.

Includes 12 screws.

This gas harness assembly routes power and control signals to a range's gas system so the appliance can ignite and operate reliably. Replacing a worn or damaged harness restores proper electrical connections and helps resolve ignition faults. What it does:

• Provides the wiring and connector links between control components and gas-system parts (valve/igniter)
• Restores electrical continuity for ignition and burner operation
• Commonly used when burners won't light, ignition sparks are absent, or intermittent operation occurs
• Prevents shorts or open circuits caused by frayed wires or damaged terminals

• One gas harness assembly as shown

• Disconnect electrical power and shut off the gas supply before beginning work
• Verify correct connector orientation and fully seat terminals for reliable contact
• Inspect adjacent components for heat or corrosion damage while replacing the harness