Parts for Briggs & Stratton 20M314-1237-E1: Camshaft, Crankcase Cover, Crankshaft, Cylinder, Lubrication, Operator's Manual, Piston / Rings / Connecting Rod, Warning Label Parts

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

This is a crankcase gasket that is used in lawn and garden equipment. It is responsible for creating an airtight seal between the cylinder assembly and the crankcase. The part is made of durable composite material, but over time it can deteriorate or break. If this happens, the other components will no longer have the appropriate seal and the tool will not work correctly. Replacing the crankcase gasket requires putting the equipment on a stable surface and disconnecting the spark plug wire. The equipment will need to be disassembled before turning the focus to the engine. Disassemble the motor to gain access to the crankcase gasket and any other damaged component inside. The replacement process will require the use of a pair of pliers, a wrench set, and a socket set. Remove the old crankcase gasket and place the new one in the same location. Reassemble all the parts to use the tool in the future.This crankcase gasket is sold as an individual part. It is an authentic OEM replacement part sourced directly from the manufacturer. This part is compatible with lawn mowers, snowblowers, and wood chippers manufactured by Simplicity, Cub Cadet, and Briggs & Stratton.

The oil drain plug plays an important role in lawn and garden machines, although most only realize how important it is when it is not working properly. The plug fits into the oil drain at the bottom of the motor. It is removed to allow the oil to be drained from the motor when changing the oil. The durable oil drain plug may need to be replaced if it is no longer working properly. There could be leaks that allow the oil to escape from the motor, which would indicate it needs to be replaced. If the plug is lost, it will need to be replaced, as well. The genuine OEM replacement oil drain plug is sold individually. It is used for lawn mowers, snowblowers, tillers, leaf blowers, pressure washers, chainsaws, edgers, log splitters, wood chippers, heat pumps, generators, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Kenmore, Toro, Cub Cadet, Homelite, Murray, Lawn-Boy, Snapper, and Simplicity.

This oil seal is a genuine OEM replacement part designed for use on a wide variety of small gas-powered appliance engines. Although small, an oil seal is an important part of the oil cylinder assembly as it prevents oil from leaking into other parts of the engine. If oil begins to leak into the engine, it can corrode other parts or even pose a fire hazard. Therefore, it's important that the oil cylinder is tightly sealed to prevent any damage to the engine. Seals can wear out over time, especially if exposed to heat. Heat will cause the seal to shrink, effectively unsealing the oil cylinder. Before making this repair, be sure to drain the oil cylinder of any oil and be prepared for an involved replacement process. This part is compatible with Toro, Murray, and Briggs & Stratton appliances and is sourced from the original manufacturer. It ship individually of other hardware.

The flywheel key is the component on outdoor equipment that keeps the flywheel connected to the crankshaft. Over time, this key may become damaged or broken, particularly if the engine experiences a forceful stop, like hitting a large stationary object. If the flywheel key breaks, the engine will not start. A slightly damaged flywheel key is noticeable through symptoms like misfiring, backfiring, or having no power. If any of these are occurring, the flywheel key should be replaced to prevent complete engine failure.A flywheel puller tool is required for this repair. Make sure the engine is cool before working on the flywheel. Wear safety gear, including gloves and eye protection. Disconnect the spark plug and remove the blower housing. Remove the flywheel mounting nut and set it aside. Take the recoil starter cup off the mower. Use the flywheel puller to remove the flywheel and access the flywheel key. Remove the broken flywheel and replace it with the new flywheel. Reverse the steps to put the mower back together.This flywheel key is made of an aluminum alloy and is sold as an individual part. It is designed for use in lawnmowers, lawn tractors, and other small engines manufactured by Briggs and Stratton, Toro, Lawn-Boy, Simplicity, MTD, and others.

These genuine replacement piston rings seal the crankcase and create the optimal compression to power the lawn tractor engine. Piston rings are constantly exposed to high pressure and temperatures and can wear down or become damaged over time. A worn or broken seal means that the engine will lose compression and power and could become completely disabled if the damage is bad enough. Replacing the piston rings will give the engine the proper seal for optimal performance when OEM parts like this ring set are used. This genuine OEM ring set is manufactured to be used in hundreds of engines for lawn tractors manufactured by Briggs & Stratton and Toro. These rings have multiple locations and applications, depending on the type of engine and tractor in question. The piston rings are sold in a set of four durable rings made of high-quality metal. Always perform engine repairs only after the engine has cooled and when the spark plug has been disconnected for safety.

This genuine replacement retainer E-clip is intended for use with lawn mowers, snowblowers, pressure washers, and more. It gets its name from the shape of the letter “E”, and has one side open, allowing it to have a larger retaining area and higher thrust capacity. Depending on the piece of equipment they are installed in, these retaining clips hold bearings, gears, pulleys, and other moving parts which have grooves in them. They are made of heat-treated steel which allows it hold strong through many uses, but it may eventually begin to wear out or break with extended use.This retainer ring E-clip is compatible with several equipment brands which use Briggs and Stratton engines This is a genuine OEM replacement part and is sold individually.