Parts for Ge PFCF1NJXCCC: 06 - Case Parts

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.

Base grille cover that installs at the bottom front of your refrigerator. Replace if cracked, broken, or missing to restore the finished look.

Covers the base of your refrigerator beneath the door. Replace if cracked, broken, discolored, or missing to restore appearance and protect components.

Silicon controlled rectifier (SCR) for refrigerators. Regulates power to heating elements and motors. Replace if cracked, damaged, or burned out.

Replacement #8-18 machine screw for securing refrigerator panels, brackets, and internal components. Needed when original screws are stripped or missing.

White plastic clip that secures the rear of refrigerator shelves or drawer rails to the cabinet wall. Replace if cracked, broken, or missing.

This center hinge assembly (right) replaces the middle door hinge on compatible refrigerators to restore proper door alignment and secure closing. It's a direct-fit hinge for the refrigerator's center mounting point. What it does:

• Supports the refrigerator door at the center hinge location for smooth opening and stable positioning
• Helps prevent door sagging, rubbing, or uneven gaps that can compromise the seal
• Restores proper door alignment so the gasket can seal fully and the door closes reliably
• Works with the surrounding hinge components to maintain correct door movement

• Disconnect power and remove food and shelves from the door before starting
• Support the door while removing and installing the hinge to prevent damage or injury
• Use correct hand tools and avoid overtightening fasteners to prevent hinge or cabinet damage

Right-hand center hinge assembly for refrigerators. Mounts between doors to support proper alignment. Replace if cracked, bent, or worn for smooth operation.

Hex head screw for securing refrigerator components and panels. Replace if screw is stripped, corroded, or missing during repairs or reassembly.

Silicon controlled rectifier for refrigerator control circuits. Regulates power flow to heaters or motors. Replace if circuit control is faulty or damaged.

Fix inconsistent cooling or excess moisture in your refrigerator with this humidity sensor. Direct replacement part restores proper climate control.

Protective housing cover for refrigerator humidity sensor. Replaces cracked, broken, or missing covers. Installs in fresh food compartment.

Fix inconsistent cooling or frost buildup with this refrigerator humidity sensor. Monitors moisture levels to optimize defrost cycles. Direct replacement.

Replaces the center hinge assembly on French door refrigerators. Mounts between upper and lower doors to support door alignment and operation.

Replace your refrigerator's center hinge assembly if the door sags, misaligns, or won't close properly. This adjustable left-hand hinge connects doors.

Adjustable hinge pin that installs in the door hinge bracket to provide a pivot point. Replace when worn, loose, or damaged to restore door alignment.

Replacement closure spring for refrigerator doors and panels. Installs at hinge points to provide smooth closing action. Needed when original is broken, stretched, or missing.

White corner cap cover for side-by-side refrigerators. Replaces cracked, broken, or missing corner trim pieces. Restores clean appearance.

Replacement corner cap for refrigerator door edges. Covers and protects the outer corner from damage. Replaces cracked, chipped, or missing caps.

Corner cap cover for side-by-side refrigerators. Replaces broken, cracked, or missing corner trim caps. Restores finished appearance to cabinet edges.

Front roller assembly for refrigerators. Mounts to the base to enable smooth movement and leveling. Replace if cracked, worn, or mobility is impaired.

Secures mobility components and wheel brackets on side-by-side refrigerators. Replace if screw is missing, stripped, or worn to restore stable mounting.

Replacement door closure spring for refrigerator hinges. Installs on door hinge assembly to provide tension for proper closing. Needed when broken or worn.

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

Adjustable leveling leg installs at the base of your refrigerator to restore proper height and stability. Replace worn, damaged, or missing legs.

Leg bracket assembly for refrigerators. Mounts to the base to secure and support adjustable legs. Replace if cracked, bent, or broken to restore stability.

Interior light not working when door opens? This light switch controls refrigerator illumination. DIY-friendly install takes 30-45 minutes with video.

Freezer door closure lever arm for refrigerators. Installs inside the freezer compartment to activate door sealing. Replace if cracked or broken.

Replacement lever arm for refrigerator freezer door closure mechanism. Installs on door hinge assembly. Needed when original is broken or worn.

Lever arm for refrigerator freezer door closure assembly. Enables proper door latching and sealing. Replace if worn, broken, or causing poor closure.

Freezer door closure lever arm for refrigerators. Mounts inside the freezer compartment to control door closing mechanism. Replace if broken or worn.

Lever arm closure component for refrigerator freezer drawers. Mounts in base channel and works with cam to auto-close drawer. Replace if broken or missing.

Freezer door closure lever arm for refrigerators. Installs inside the freezer compartment to activate the door switch. Replace if broken, cracked, or missing.

Replace your refrigerator's left top hinge cover if cracked, broken, or missing. This plastic cap conceals hinge hardware for a clean appearance.

Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.

Replacement door hinge closure for your refrigerator. Installs on the door frame to secure the hinge assembly. Needed when original is cracked or broken.

Door hinge closure assembly for refrigerators. Secures the door to the cabinet frame. Replace if the assembly is cracked, broken, or missing components.

Door hinge closure assembly for refrigerators. Secures door alignment and smooth operation. Replace if hinge is cracked, worn, or door sags.

Door hinge closure assembly for your refrigerator. Installs on the door frame to secure the hinge mechanism. Replace if cracked, broken, or worn.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

Replacement top mullion striker bracket for your refrigerator. Secures the door alignment system between compartments. Replace if cracked or broken.

This cover top striker secures the appliance door/cover to the cabinet so the door latches properly and stays closed. Durable replacement for worn or broken striker assemblies to restore reliable door engagement. What it does:

• Provides the contact point for the door latch/strike to engage and hold the door closed
• Replaces damaged or worn striker that can cause a door to fail to latch or pop open
• Helps stop rattling or misalignment caused by a broken strike surface
• Works with the original latch mechanism to maintain proper door positioning

• Disconnect power to the appliance before beginning any repair
• Remove outer door or top cover panels as required to access the striker
• Retain and reuse any original screws or clips unless replacement hardware is specified
• Align striker with latch mechanism and tighten securely; do not force or overtighten

Replace worn or broken refrigerator leveling leg roller wheels. Installs on adjustable feet to enable smooth movement and positioning of your unit.

Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.

This hinge shim restores proper door/lid alignment by spacing the washer hinge where wear or misalignment causes rubbing or improper closing. It's a simple replacement that helps quiet operation and improves fit. What it does:

• Provides precise spacing at the hinge to correct lid/door misalignment
• Reduces rubbing, scraping, and uneven contact during operation
• Helps restore smooth opening and closing of the washer lid/door
• Can prevent premature wear on the hinge and mating surfaces

• Disconnect power to the appliance before beginning any work
• Remove the hinge fasteners to access the worn area and install shim as needed
• Use basic hand tools; keep hardware organized during reassembly