Parts for Ge PFSF0MFCA BB: 06 - Case Parts

Purifies water before reaching your dispenser and ice maker. Replace every 6 months for clean, safe drinking water. Verify fit with your model number.

Secures the hinge cover to your refrigerator door or cabinet hinge. Replace this screw if it's missing, stripped, or damaged to stop the cover from loosening.

Covers and protects the lower front of your refrigerator. Replace if cracked, broken, or missing to maintain a finished look and proper airflow routing.

Center hinge and pin assembly for refrigerator doors. Replaces worn, broken, or damaged hinges that cause door misalignment or sagging. Direct fit.

Center hinge and pin assembly for French door refrigerators. Replaces broken or worn hinges that cause door misalignment or sagging. Installs between doors.

Hex head screw for securing refrigerator components and panels. Replace if screw is stripped, corroded, or missing during repairs or reassembly.

Silicon controlled rectifier for refrigerator control circuits. Regulates power flow to heaters or motors. Replace if circuit control is faulty or damaged.

Fix inconsistent cooling or excess moisture in your refrigerator with this humidity sensor. Direct replacement part restores proper climate control.

Protective housing cover for refrigerator humidity sensor. Replaces cracked, broken, or missing covers. Installs in fresh food compartment.

Fix inconsistent cooling or frost buildup with this refrigerator humidity sensor. Monitors moisture levels to optimize defrost cycles. Direct replacement.

Replacement hinge center pin assembly that restores proper door pivot and alignment. Replace when doors sag, don't close properly, or seals leak. Confirm fit with your refrigerator model number before ordering.

Adjustable hinge pin that installs in the door hinge bracket to provide a pivot point. Replace when worn, loose, or damaged to restore door alignment.

Replacement closure spring for refrigerator doors and panels. Installs at hinge points to provide smooth closing action. Needed when original is broken, stretched, or missing.

Replace your refrigerator's hinge cover cap if cracked, broken, or missing. Covers exposed hinge hardware for a finished look on side-by-side models.

Replaces a damaged or bent refrigerator cover hinge for access panels and service doors. Restores smooth opening and secure support when original is worn or broken.

White corner cap cover for side-by-side refrigerators. Replaces cracked, broken, or missing corner trim pieces. Restores clean appearance.

Replacement corner cap for refrigerator door edges. Covers and protects the outer corner from damage. Replaces cracked, chipped, or missing caps.

Machine screw secures panels, brackets, and components in refrigerators. Replaces lost, stripped, or damaged 10-32 fasteners to restore stability.

Air separator divider for side-by-side refrigerators. Replaces cracked, broken, or missing air flow dividers in the fresh food compartment.

Threads into the leveling leg or adjuster bracket to raise or lower your refrigerator cabinet. Replace if stripped, missing, or worn for stable footing.

Leg bracket assembly that mounts to the bottom of your refrigerator to support and secure the leveling legs. Replace if cracked, broken, or missing.

Lever arm closure component for refrigerator freezer drawers. Mounts in base channel and works with cam to auto-close drawer. Replace if broken or missing.

Freezer door closure lever arm for refrigerators. Mounts inside the freezer compartment to control door closing mechanism. Replace if broken or worn.

Replacement lever arm for refrigerator freezer door closure mechanism. Installs on door hinge assembly. Needed when original is broken or worn.

Freezer door closure lever arm for refrigerators. Installs inside the freezer compartment to activate door sealing. Replace if cracked or broken.

Replacement hinge top cover for your refrigerator. Installs over the top hinge mechanism to conceal hardware. Order a new cover if original is cracked or missing.

Refrigerator hinge top cover cap. Installs over the upper door hinge mechanism. Replace if cracked, broken, or missing for a complete appearance.

This top door hinge cover protects and conceals the refrigerator's upper hinge assembly for a clean, finished look and safer door operation. It restores appearance and helps keep the hinge free of dirt and debris. What it does:

• Covers and protects the top door hinge from dust, spills, and accidental contact
• Keeps the hinge assembly concealed for a neater exterior finish
• Prevents foreign objects from catching in the hinge and affecting door movement
• Common symptom: cracked, broken, or missing hinge cover that exposes the hinge or looks unsightly

• High-level replacement: usually accessible at the top of the refrigerator door; may require removing a small number of screws or the hinge cap
• Support the door when loosening hinge fasteners to avoid injury or door sag
• Disconnect power only if directed by the refrigerator's service instructions; follow OEM safety guidance

This hinge top cover cap installs on your refrigerator door hinge assembly. Replace it if the original is cracked, broken, or missing to restore appearance.

Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.

Replace your refrigerator's door hinge closure assembly when the hinge is cracked, broken, or no longer holds the door securely in place.

Top door hinge closure assembly for your refrigerator. Mounts at the top of the door to secure it to the cabinet. Replace if cracked, broken, or worn.

Top hinge closure assembly for your refrigerator door. Replaces broken or worn hinge components that secure the door. Essential for proper alignment.

Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.