Parts for Ge PFSF0MFCA BB: 05 - Fresh Food Shelves Parts

The GE refrigerator water filter is an OEM replacement part responsible for ensuring the quality of the water dispensed on GE Profile top and bottom freezer refrigerators. It is responsible for purifying the water before it reaches your glass or ice maker, providing you with clean and safe drinking water directly from your refrigerator. To maintain optimal water quality and ensure the filter's effectiveness, it is recommended to replace the filter every 6 months or when the rated capacity of 750 gallons is reached.

Over time, the water filter can become clogged with sediment, reducing its effectiveness. Regular use and the accumulation of minerals and contaminants can lead to the need for replacement.

Symptoms of a bad water filter include:

• Reduced water flow from the dispenser
• Ice cubes with an unusual taste or odor
• The filter indicator light staying on
• Visible particles in the water or ice

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. For the best performance, it is recommended to replace the water filter every six months or as indicated by the filter change light on your refrigerator.

The Slide Pan Right Hand is an OEM part for GE refrigerators. This component supports and guides the movement of the refrigerator's crisper or deli drawer, allowing it to slide in and out smoothly. It ensures easy access to stored food items and helps maintain proper alignment and functionality of the drawer.

Causes of a bad slide pan can include wear and tear from regular use, damage from overloading the drawer, or accidental impact that leads to bending or breaking. Ensuring the slide pan is in good condition is essential for the smooth operation of the refrigerator drawers.

Symptoms of a bad slide pan include:

• Difficulty in opening or closing the drawer
•  The drawer not staying aligned or securely in place
• Noticeable wobbling or uneven movement of the drawer
• The drawer falling off its tracks

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This slide control is the user-operated slider that adjusts a front-panel setting, restoring smooth, reliable position selection and tactile feedback. It replaces worn or damaged sliders so controls respond predictably. What it does:

• Moves along a track to change a user control setting (e.g., temperature, speed or level) and provides a detented position feel
• Restores mechanical connection between the user knob/slider and the internal control mechanism
• Commonly replaces units that are stuck, loose, broken, or provide intermittent contact
• Helps eliminate slipping or poor tactile feedback when selecting settings

• One slide control assembly as shown

• Disconnect power to the appliance before starting any repair
• Most installs require removing the console or control panel; keep screws and small parts organized
• Handle plastic tabs and mounting features gently to avoid breakage
• Ensure secure mating and correct orientation before reassembly

This #8-18 x 5/8-inch Torx T20 screw secures panels, brackets, and trim in your appliance. It replaces missing or damaged hardware to restore a tight, reliable hold and reduce looseness or rattling.

• Fastens sheet-metal or plastic components to the appliance cabinet or frame
• Replaces missing, stripped, or corroded screws to maintain proper fit
• Helps reduce vibration and rattling from unsecured parts
• Torx T20 drive; #8-18 thread; 5/8-inch length

• Disconnect power and shut off water before servicing
• Use a T20 Torx driver; start threads by hand to avoid cross-threading
• Tighten snugly—do not overtighten to prevent stripping
• Wear cut-resistant gloves; sheet-metal edges can be sharp

This damper is the refrigerator air-flow control that opens and closes to direct cold air between compartments, helping maintain proper cooling balance. Replaces a worn or stuck damper to restore regulated airflow and more consistent temperatures. What it does:

• Controls the amount of cold air moved from the freezer into the refrigerator compartment.
• Opens and closes based on the fridge's temperature control signals to balance compartment temperatures.
• A faulty damper can cause uneven cooling, a warm fresh food section, or overcooling in one compartment.
• Works with the existing housing and linkage to modulate airflow as commanded by the control board.

• One damper assembly

• Disconnect power to the appliance before starting any repair to avoid electric shock.
• Remove interior panels or shelves as needed to access the damper; keep fasteners for reassembly.
• Handle plastic components gently to avoid cracking; test damper operation after reassembly.

This damper assembly controls airflow between refrigerator compartments to help maintain even temperatures. It replaces a worn or stuck damper to restore proper cold-air balance and improve cooling performance. What it does:

• Opens and closes to regulate cold-air flow from the freezer to the fresh-food section
• Can restore airflow when the refrigerator is warmer than the freezer or compartments are unevenly cooled
• Helps correct symptoms such as poor cooling, fluctuating temperatures, or a freezer that's much colder than the fridge
• Works with the refrigerator's temperature controls to maintain set temperatures

• One damper assembly

• Disconnect power to the appliance before starting any repair
• Locate the damper in the fresh-food section near the top or the freezer-to-fridge air duct; remove shelves or covers as needed for access
• Handle the actuator and linkage gently; ensure correct orientation and secure mounting when installing
• After installation, reconnect power and allow the refrigerator several hours to stabilize; verify airflow and temperature operation

The Pan Cover Wheel is an OEM part for GE refrigerators. It supports the movement of the fresh food section, allowing it to slide smoothly when accessing the refrigerator’s drawers.

Over time, the pan cover wheel can wear out or become damaged due to regular use, exposure to the weight of food items, or accidental impacts. If the wheel is faulty, it can hinder the smooth operation of the pan cover.

Symptoms of a bad pan cover wheel include:

• Difficulty sliding the pan cover in and out
• The pan cover not aligning properly or becoming stuck
• Unusual noises such as grinding or squeaking during movement
• Visible cracks or damage to the wheel

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

A flat head sheet metal screw used to fasten appliance panels and components where a flush finish is needed. Zinc plating helps resist corrosion and provides long-lasting secure attachment. What it does:

• Secures trim, panels, brackets or small components to sheet metal surfaces
• Flush countersunk head sits level with the surface for a clean fit
• Zinc finish resists rust in typical household environments
• Replaces stripped, missing or loose fasteners that cause rattling or misalignment

• Unplug or disconnect power to the appliance before servicing
• Use the correct sized Phillips driver or bit to avoid cam-out and head damage
• Do not overtighten; stop when the head is flush to prevent stripping or deforming the panel

This vegetable pan support assembly holds and guides the crisper/vegetable drawer so it opens smoothly and keeps the cover/shelf above level. Replace a damaged support to restore proper drawer alignment and prevent sagging or sticking. What it does:

• Supports the crisper/vegetable drawer and the cover/shelf it rides on
• Maintains level alignment to reduce binding, scraping, or tipping
• Provides a stable track point for smooth drawer movement
• Common symptoms: drawer tilts, binds, or falls; shelf sags; visible cracks or broken tabs on the support

• 1 vegetable pan support assembly

• Unplug the refrigerator before servicing
• Remove the crisper drawer and cover/shelf to access the support
• Match the new support's orientation to the original; transfer any reusable hardware if applicable
• Seat the support fully and securely before reinstalling the cover/shelf and drawer; test drawer travel

This replacement roller pan supports and guides the oven or range storage drawer, restoring smooth sliding and helping contain spills or crumbs under the drawer. It installs behind the drawer to stabilize rollers and track movement. What it does:

• Holds and aligns the storage-drawer rollers so the drawer opens and closes smoothly
• Helps contain crumbs and minor spills beneath the drawer area
• Reduces drawer sagging, sticking or noisy operation when rollers are worn or damaged
• Restores proper drawer tracking and prevents misalignment

• One replacement roller pan

• Disconnect power to the appliance before servicing to avoid injury
• Remove the oven/storage drawer to access the pan
• Inspect rollers and bracket hardware; replace any damaged fasteners or rollers as needed
• Use basic hand tools; reassemble carefully and test drawer operation after installation