Parts for Ge ZIP364IPVBII: Case Parts

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

Size: 1/4 inch diameter.

This is a sensor mounted in or near the front grille area of the refrigerator. It monitors ambient temperature around the base of the unit, which helps the control system regulate compressor and defrost operations. Replace this sensor if the refrigerator is running too frequently, not cooling properly, or displaying temperature-related error codes.

T30 M6 mounting bolt for freezers and refrigerators. Secures internal components and panels. Replace if missing, stripped, or damaged during repairs.

Straight 1/4-inch coupler joins two sections of refrigerator water tubing. Replace when cracked, leaking, or missing to restore connections.

Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.

Fix water dispenser or ice maker issues with this 90-degree union fitting. Connects 1/4" water tubing at right angles in tight spaces behind refrigerators.

This is a mounting screw used to secure various internal or external components in the refrigerator. It is a small Phillips pan-head fastener designed for use with the specific thread and length required by the appliance. Replace this screw if the original is stripped, lost, or damaged during a repair, causing a component to be loose or improperly secured.

Specs: 6-19 pl flp 3/4 s

Sheet metal screw secures refrigerator panels, trim, and brackets. Replace missing, stripped, or corroded screws to restore proper fit and assembly.

This 5/16-18 threaded nut secures fasteners on appliance assemblies, restoring stable connections and helping prevent loose or wobbly parts. Simple, durable replacement that fits standard 5/16-18 bolts used in many appliance brackets and components. What it does:

• Secures a 5/16-18 bolt to hold panels, brackets, or components in place
• Restores firm mechanical connections if the original nut is missing, stripped, or corroded
• Helps stop rattling, misalignment, or movement caused by a loose fastener
• Compatible with standard 5/16-18 threaded hardware used in appliance repairs

• Turn off and unplug the appliance before accessing internal components
• Use the correct wrench or socket to seat the nut; avoid using damaged tools
• Tighten until snug to secure the connection; do not overtighten to avoid thread damage
• If threads are damaged or stripped, replace the matching bolt and inspect mating parts

This front access cover clip secures the refrigerator's lower/front access panel so the panel stays aligned and the area remains protected. It replaces a broken or missing clip to restore a snug fit and reduce rattling. What it does:

• Secures the lower/front access cover to the appliance frame
• Keeps the panel aligned to prevent gaps and rubbing
• Stops rattling or vibration caused by a loose access cover
• Helps maintain a finished appearance and protects internal components

• Disconnect power before beginning any work to avoid shock
• Typically installs with a snap-fit into the panel/frame; may require gentle pressure
• Remove the access panel screws or clips first to reach the clip location
• Inspect surrounding tabs and mating surfaces for damage; replace damaged parts as required

Fixes intermittent operation and communication faults caused by damaged RJ45 connectors. Plug-and-play board-to-board connector cable. 15-minute repair.

This SCR (silicon controlled rectifier) controls high-current switching in the appliance's power circuit to enable reliable on/off control of heating or motor circuits. Designed for direct replacement of the original SCR component. What it does:

• Acts as a solid-state switch to control power to heating elements or motors when triggered by the appliance control board.
• Helps regulate current during start-up and run cycles to maintain proper operation of the appliance.
• Failures can cause symptoms such as no heat, intermittent operation, or the appliance not powering its load.
• Matches the OEM mounting and stud terminal configuration for proper electrical connection.

• One SCR component (8-32 stud) as pictured.

• Disconnect power to the appliance before servicing to avoid shock or damage.
• Use proper tools for the 8-32 stud terminals and ensure secure electrical and heatsink connections.
• Inspect mounting surfaces and replace any damaged hardware or thermal pads as needed for safe operation.

A replacement leveling nut that secures and locks an appliance's adjustable leg to keep the unit stable and properly aligned. Helps maintain consistent leveling to reduce rocking, vibration and improper door alignment. What it does:

• Locks an adjustable leveling leg in place after height is set
• Prevents the leg from turning or backing out during use
• Helps stop rocking and excessive vibration that can cause noise or movement
• Supports proper appliance alignment for correct door and drawer operation

• One leveling nut

• Disconnect power and empty the appliance of contents before working underneath
• Turn the adjustable leg to set height, then tighten the nut up against the foot bracket to lock position
• Use appropriate hand tools or pliers; avoid overtightening to prevent thread damage
• Test appliance stability and recheck level after installation

A small plastic standoff that secures and insulates the refrigerator main control board from the chassis to prevent shorts and keep the board stable. Simple, serviceable replacement for damaged or missing mounting posts. What it does:

• Positions and supports the main control board to prevent movement and vibration
• Provides electrical insulation between the board and metal chassis to reduce short risk
• Restores proper board alignment so connectors and mounting points seat correctly
• Commonly replaced when the board is loose, cracked, or the original standoff is missing

• One main board standoff

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove protective panels to access the control board; handle the board by edges
• Press or snap the standoff into the chassis mounting hole, then seat the board onto the post
• Do not force or overtighten fasteners; replace any damaged clips or screws as needed

Interior light not turning on or staying on? This master light switch kit restores reliable lighting control in your freezer. Direct-fit assembly.

Reduces chlorine, lead, cysts, and pharmaceuticals for clean water and ice. Replace every 6 months or when filter light activates. Verify fit by model.

This hinge limit pin is the replacement door stop that limits hinge travel and helps the door open and close on appliances. It restores proper hinge movement and prevents over-rotation and binding. What it does:

• Stops the hinge at the correct position to prevent the door from over-rotating
• Helps maintain proper door alignment for consistent sealing and operation
• Reduces hinge binding, sagging, and uneven door movement
• Fits into the hinge assembly to act as a physical travel limiter

• One hinge limit pin

• Unplug the appliance or disconnect power before starting work
• Support the door or have a helper when removing hinge components to avoid damage or injury
• Use basic hand tools; inspect surrounding hinge parts and replace if worn

Fixes weak water dispenser flow and no ice production. Controls water supply to your refrigerator's dispenser and ice maker. DIY-friendly repair.

RFID board reads filter chips to authenticate water filters and enable dispensing. Replace if filter light stays on or dispenser shows errors after installing new filter.

Fixes refrigerator that won't power on or has dead display. This power supply board distributes voltage to control modules and sensors. DIY repair.

Ice maker stopped making ice? This dual water inlet valve controls flow to both the ice maker and water dispenser. Common DIY fix for no ice production.

Fix uneven cooling or defrost issues with a new temperature sensor. Most DIYers complete this repair in under an hour with basic tools and our video.

This replacement white screw secures trim, panels, and small components in compatible appliances, restoring proper fit and preventing loose parts or rattling. Ideal when the original screw is missing, stripped, or damaged. What it does:

• Secures trim pieces, panels, or small appliance components for a finished appearance
• Replaces missing, stripped, or damaged screws that cause loose parts or vibration
• Restores proper alignment of removable parts that rely on a single fastener

• Disconnect power to the appliance before servicing and work on a cool, stable surface
• Use the correct screwdriver bit and seat the screw straight to avoid stripping
• Hand-tighten until snug; do not overtighten to prevent cracking plastic or deforming threads
• Replace with the identical part number for proper fit and finish

This striker plate assembly secures the appliance door latch, helping the door close firmly to maintain proper temperature and performance. It restores reliable door engagement and reduces air leaks from a misaligned or damaged striker. What it does:

• Provides a secure catch point for the door latch to hold the door closed
• Ensures proper door alignment to help maintain internal temperature
• Commonly replaces worn, bent, or broken striker hardware that prevents the door from staying closed
• Resolves symptoms like a door that won't latch, squeaks when closing, or visible misalignment

• One striker plate assembly

• Unplug the appliance or disconnect power before starting any repair
• Remove any door trim or access panels as required to access the striker plate
• Align the striker plate with the latch, then secure with the original fasteners; avoid overtightening

Replaces the water filter when filtration isn't needed, maintaining water flow to your ice maker and dispenser. Confirm fit with your model number.