Parts for Lg GF5D906SL: Case Parts

Center plate assembly for bottom-mount refrigerators. Replaces cracked, broken, or missing center plates. Installs in the interior compartment.

Center plate assembly for bottom-mount refrigerators. Installs in the refrigerator compartment. Replace if cracked, broken, or missing to restore appearance.

Center hinge assembly for refrigerators. Connects and supports upper and lower doors at the middle. Replace if cracked, broken, or worn out.

Refrigerator not cooling or making unusual noises? This compressor sealing pipe restores proper refrigerant flow. Moderate difficulty repair part.

Refrigerator not cooling evenly or making loud fan noise? This air guide directs airflow from the blower to restore proper cooling. Simple 15-minute fix.

Rail guide assembly mounts inside your bottom-mount refrigerator to support and align drawer glides. Replace if cracked, broken, or causing misalignment.

This drain tray assembly collects and channels defrost and condensation water away from the appliance to prevent interior pooling and leaking. It fits into the appliance base and helps maintain normal drainage during cooling cycles. What it does

• Catches defrost/condensation runoff and directs it to the drain path
• Prevents water from pooling under components or inside the cabinet
• Reduces risk of odors and mildew by keeping drainage contained
• Restores proper drainage when original tray is cracked, warped, or missing

• One drain tray assembly

• Disconnect power before starting any repair
• Remove access panels or shelving as needed to reach the tray; handle panels and edges carefully
• Ensure the tray is seated and aligned to the drain channel and any mounting tabs are engaged
• Inspect associated drain tube and seals; replace if damaged to ensure proper function

Refrigerator won't cool or compressor won't start? This overload protector prevents compressor damage from overheating or power surges. Easy DIY fix.

Fix a refrigerator that won't cool, has temperature issues, or shows error codes with this electronic control board. Moderate DIY repair in 1-2 hours.

Reduces food odors in your refrigerator's fresh-food compartment by neutralizing smells at the source. Replace when odor control becomes less effective.

Replacement shelf support bracket that secures refrigerator shelves in place. Restores proper alignment when original holder is cracked, broken, or missing.

Drain tray that collects defrost water beneath your refrigerator. Replace if cracked, broken, or missing to prevent water leakage onto your floor.

Protects your refrigerator's light bulb from moisture and damage. Replace if cracked, discolored, or broken to maintain proper lighting and safety.

Fix temperature inconsistencies or error codes with this refrigerator sensor cover. Protects temperature sensors for accurate cooling. Simple 10-minute fix.

This is a rear end cap designed to attach to the refrigerator door handle, giving it a finished look and helping hold the handle securely in place. It snaps onto the end of the handle assembly. Replace this part if it is cracked, broken, or missing, which can make the handle feel wobbly or unstable during use.

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

This DC motor assembly replaces the appliance's main DC drive motor to restore reliable motor-powered operation. It provides the exact-fit motor needed to regain normal mechanical function and reduce downtime. What it does:

• Drives the appliance's motorized components so the unit can run as intended
• Stops motor-related failures like no-spin, no-run, or intermittent operation
• Helps resolve motor humming or erratic movement when the motor is the cause
• Works with the appliance's existing mounting and electrical connections when compatible

• Disconnect power before servicing to avoid shock or injury
• Replacement typically requires removing panels and disconnecting electrical connectors—keep track of fasteners
• Inspect wiring harness and connectors for damage before reassembly

Water pooling under your refrigerator? A clogged or damaged drain tube causes leaks and spills. This assembly restores proper drainage flow quickly.

Water pooling under your refrigerator? A damaged drain tube assembly causes leaks and water buildup. This direct-fit part restores proper drainage.

Fix inaccurate temperature readings or sensor errors with this refrigerator sensor control board. Restores proper sensor communication and feedback.

Fix a refrigerator that won't turn off the light or runs constantly with this door switch magnet. Works with reed switches. Simple DIY replacement.

Rattling or loose parts in your refrigerator? This retaining pin secures moving components and keeps them aligned for smooth, quiet operation.

Fix uneven cooling or noisy fan operation with a new circulation fan motor. This DC motor restores proper airflow across coils. Moderate DIY repair.

Vibration-isolating grommet that mounts between the compressor and chassis. Replace if cracked, worn, or missing to restore proper cushioning.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

The Motor Assembly is an OEM part for LG refrigerators. It houses the condensing fan motor that circulates cold air within the refrigerator compartment. 

This motor assembly is responsible for actively distributing cool air to all areas of the refrigerator and freezer sections. The fan motor ensures maintained temperatures by dispersing cold air as needed based on sensor input data. 

Symptoms of a bad motor assembly include:

• Inconsistencies in interior temperatures  
• Warm spots developing inside refrigerator shelves
• Strange noises coming from the rear wall
• The fan motor fails to start or run intermittently

Replacing the motor assembly with this genuine OEM LG part restores proper airflow circulation. It is also compatible with Sears/Kenmore refrigerator models.

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

Refrigerator making loud noise or not cooling evenly? This fan assembly circulates air to eliminate hot spots and restore consistent temperatures.

Fix a refrigerator not cooling properly or running too warm with this temperature sensor. Monitors internal temps to maintain proper cooling.

Keeps refrigerator air fresh by filtering odors and contaminants. Replace every 6 months or when indicator alerts. Confirm fit with your model number.