Parts for Bosch HBN5651UC/01: Cavity-Upper Parts

Replacement interior lamp that restores lighting inside your appliance so you can see contents and monitor cooking without opening the door. Simple, direct-fit replacement for compatible Bosch appliances. What it does:

• Provides interior illumination so you can safely check food and cooking progress.
• Replaces a burned-out, dim, or flickering lamp that causes the interior light to fail.
• Fits the existing lamp socket and reconnects to the appliance's original wiring; restores normal lighting without modifying the appliance.

• Always disconnect power or unplug the appliance before replacing the lamp to avoid shock.
• Allow the old lamp to cool completely; handle the new lamp with gloves or a clean cloth to avoid contaminating the glass.
• Seat the lamp into the socket without forcing; restore power and test operation.

The Spacer is an OEM part for Bosch ranges. This part is designed to prevent metal-on-metal contact, reducing noise and wear by providing a cushioning buffer at strategic locations on the range. The bumper helps protect the range's finish and integrity by absorbing impacts that can occur during use, such as when closing the oven door or moving the range for cleaning.

Causes of a bad spacer can include deterioration from heat exposure, which can lead to hardening and cracking, or physical damage from impact or excessive force used during appliance movement.

Symptoms of a bad spacer include:

• Increased noise during door operation
• Visible damage or wear to the appliance where the bumper is installed
• The bumper becoming loose or falling off
• Scratches or other damage appearing on surfaces that should be protected

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This hinge holder secures the appliance door hinge assembly to keep the door aligned and operating smoothly. It restores proper door positioning and helps prevent sagging or uneven closing. What it does:

• Supports and anchors the door hinge assembly to the cabinet or frame
• Maintains correct door alignment to ensure even gaps and smooth opening/closing
• Helps prevent door sagging or misalignment that can cause rubbing or poor sealing
• Reduces hinge noise or binding caused by a loose or worn holder

• Disconnect power (and water for dishwashers) before starting any repair
• Remove the door or access panel per the manufacturer instructions for safe installation
• Minimal hand tools typically required; follow torque and alignment guidance in the service manual

The Sensor is an OEM replacement part for Bosch ovens and ranges. It is an essential monitoring device that allows for precise temperature, element output, and error detection.

Symptoms of a faulty stove sensor include:

• Inability to properly detect or regulate temperatures  
• Failure to detect issues that result in error codes
• Elements do not heat or function as programmed
• Temperature or heat fluctuations during cooking

Causes can include normal wear over time or exposure to residue buildup. High heat cycles may also accelerate sensor deterioration.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore ranges.

The Heating Element Oven is an OEM part compatible with Frigidaire and Electrolux wall ovens and ranges. It generates targeted heat through accurate temperature coils to provide consistent, reliable baking and broiling. The oven element ensures warm, golden finishes for any recipe.

Causes of a damaged element include mineral buildup impeding heat transfer. Physical bending or cracking of fragile coils can occur from accidental impact over years of use.

Symptoms of a failed element are:

• Uneven or insufficient heat for cooking/baking 
• Extended preheat or cook times to reach temperatures
• Hot and cold spots within the oven cavity
• Complete lack of heat requiring replacement

Replacing with this genuine OEM part restores optimal performance. Compatible with Kenmore, Gibson, and some Admiral wall ovens.
 

The Heating Element is an OEM replacement part for Bosch electric wall ovens and ranges. It is responsible for providing precise heat control to oven cavities and cooking elements. 

Symptoms of an inadequate heating element include:

• Inability to reach or maintain proper oven temperatures  
• Fluctuating temperature readings inside oven cavities
• Slow or inadequate heating of elements for cooking 

Causes can be normal wear and tear after extended use. Exposure to splatters or residue over time may also reduce heating performance.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore wall ovens.

This convection fan motor drives the oven's internal fan to circulate hot air during convection cooking. Replacing a weak or seized motor restores proper airflow for more even heating, reliable temperatures, and consistent baking and roasting results.

• Powers the convection fan to move heated air across racks for even cooking
• Helps maintain stable cavity temperature and quicker recovery after door openings
• Common symptoms of a failing motor: fan won't turn, intermittent start/stop, loud squeal or grinding, uneven baking/roasting, or a fan-related error

• Disconnect power at the breaker before servicing
• Access from the rear of the unit or through the oven cavity (model dependent); remove the appropriate panel to reach the motor
• Note wire positions and motor orientation; transfer any brackets, grommets, or screws from the original if needed
• Ensure the fan blade spins freely and is properly seated before reassembly

This flat washer secures fasteners and helps distribute load on mounting points to prevent loosening and wear. A small but essential hardware piece for reliable assembly and stable operation. What it does:

• Provides a smooth bearing surface between a fastener head or nut and the part being secured
• Helps distribute clamping force to reduce pressure on softer materials
• Reduces risk of fastener loosening from vibration or movement
• Protects mating surfaces from damage during tightening

• One flat washer

• Inspect mating fastener and surface for damage; replace parts if worn or deformed
• Slide washer onto the bolt or stud before installing the nut or fastener head
• Tighten fastener to the manufacturer's recommended torque if available
• Disconnect power and follow appliance safety procedures before accessing internal components

This is a replacement nut used to secure internal appliance components. It restores proper fastening so assemblies stay tight and reduces noise or movement caused by loose hardware. What it does:

• Secures brackets, trim or internal components to prevent parts from shifting
• Stops rattling or vibration caused by a missing or loose nut
• Restores proper fastening after maintenance or repair
• Helps maintain correct alignment of the secured component

• Disconnect power and water before accessing internal parts
• Use appropriate hand tools and a firm grip; avoid power tools that can over-torque
• Do not overtighten — snug until secure to avoid stripping threads
• Replace any corroded or damaged mating hardware for a lasting repair

The Heating Element is an OEM part for Bosch ovens. It is responsible for providing even and consistent heat distribution throughout the oven cavity during the convection cooking process.

A bad heating element can occur due to wear and tear over time, exposure to high temperatures, or damage caused by accidental mishandling. Signs of a faulty element include uneven cooking, longer cooking times, or complete failure of the convection feature.

Symptoms of a bad heating element include:

• Uneven cooking
• Longer cooking times 
• No heat being generated by the element

Replace your faulty heating element with this genuine OEM Bosch part to restore your oven. This Bosch part can also be used on Thermador and Gaggenau appliances.