Parts for Craftsman 358341900: Chassis / Bar / Handle Parts

This replacement part is a trigger and lockout kit intended for use in chainsaws. This is a genuine replacement part made by Husqvarna. Trigger and lockout kids are situated next to the handle at the top of the appliance. This part is one method of protecting the user from anything that can be harmful when using a chainsaw. It is made of durable plastic and metal. A new trigger and lockout kit might be needed if the current one is damaged or broken in any way. It is not unusual for this part to require replacement after years of normal use. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with chainsaws made by Husqvarna.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a chainsaw. The purpose of the screw in a chainsaw is to serve as a small fastening component within the internal mechanisms of the appliance. The screw in a chainsaw might need to be replaced if it is lost, misplaced, or stripped away over time from general wear and tear. If the screw is lost or misplaced, which is easy to do as it is a small part that can disappear without affecting the functionality of the appliance, the screw should be replaced by this genuine OEM replacement part. The same should occur if the screw has been damaged.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.

This is a replacement chainsaw fuel line kit that is compatible with a range of chainsaw models. Fuel lines are tubes used to feed fuel to the carburetor and to return unused fuel into the chainsaw's gas tank. If there is damage to the fuel line, it could present large problems including leaks. This will waste fuel and it can be dangerous. If there are issues with the fuel line, replace it right away.The plastic tubes can start to wear down over time. They might crack and break, or they may no longer have tight connections. Make sure that the chainsaw engine is cool before starting any repairs.The replacement chainsaw fuel line kit will work as a replacement for select models of chainsaws from Husqvarna and Craftsman. The kit is sold individually. It is a genuine OEM replacement part that has been sourced directly from the manufacturer.

The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.

Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.

Symptoms of a bad fuel pick up assembly include:

• Engine not starting or hard to start
• Engine stalling or running inconsistently
• Reduced power or performance
•  Visible damage or clogging in the fuel line

This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.

The rear isolator spring is a genuine replacement part found in select models of chainsaws. This authentic part is made of durable metal and is responsible for providing tension between the chassis and rear handle to keep the unit operating properly. The spring could become worn over time, or it could become lost during other repairs. If this rear isolator spring is lost or damaged, it will need to be replaced with a genuine OEM model like this one before the unit will be safe to use. Pliers and an Allen wrench are to replace this part, which is sold individually and does not include any other parts or hardware. The rear isolator spring is manufactured to exact standards by Poulan and can be used in compatible models of chainsaws from Jonsered, Husqvarna, and Poulan. Users should wear gloves and allow the unit to cool completely, as well as to disengage the spark plug for safety when performing repairs on chainsaws.

A chainsaw clutch drum works by driving the chain along with the gear. The gear and clutch drum are engaged by the clutch when the engine’s speed picks up. The chainsaw clutch drum likely needs replacement when the chain isn’t turning. This repair is easy to complete and can be accomplished with minimal tools. The hardest part of this repair might be the removal of the old chainsaw clutch drum in cases where they are misshaped or warped from damage from continual friction. Many will work well past the point when they should be replaced, so it is essential to monitor your chainsaw parts for noticeable signs of disrepair or inefficiency. This chainsaw clutch drum is compatible with Craftsman and Poulan chainsaws. It is a high-quality genuine OEM clutch consisting of durable metal.

The clutch connects to the crankshaft of the chainsaw engine. The crankshaft turns the up and down motion of the pistols into a rotation, which turns the drum and makes the chain go around. As the inner drum of the clutch starts to wear out, it puts more and more pressure on the springs, causing them to break. So, without a properly functioning clutch, the engine will run, but the blade will not turn. Replace the chainsaw clutch assembly using our genuine OEM part sourced directly from the manufacturer. A socket wrench and a screwdriver will be needed. Start by removing the chain brake cover to gain access to the clutch. Remove the chain and bar and then bind the piston in place. From there, use a screwdriver to remove and replace the clutch. This part is compatible with Poulan or Craftsman brand products. Sold individually.

This large clutch washer is a genuine Husqvarna part, sold individually. This large clutch washer can be used as a replacement part for a chainsaw. The purpose of a large clutch washer for a chainsaw is to space out several components of the appliance so its fasteners do not create friction and cause damage within the internal parts of the chainsaw.The large clutch washer might have to be replaced at some point within the standard lifespan of a chainsaw. Washers are small parts that can be easily lost or misplaced, and if it is found that a washer has disappeared, it should be replaced immediately. If the washer is stripped to the point that it cannot serve as a fastening component, it should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This large clutch washer is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

This chainsaw fuel cap assembly is made from high-quality plastic. Durable threads keep this chainsaw fuel cap assembly working for years of use. You place one end in the fuel tank while the screw cap covers the nozzle. This keeps your gas from spilling out and causing possible damage or injury. You can’t cut down a tree or slice up some firewood with gas leaking everywhere. This also leads to harming the environment around you. Chainsaws fuel caps can swell. The rubber seals may leak after a certain amount of use. The cord attaching the cap to the insert may break, allowing the cap to be lost. Replacing the chainsaw fuel cap assembly can correct these problems. Pliers or a wrench may be needed to remove the old fuel cap assembly. This genuine OEM chainsaw fuel cap assembly was manufactured for use with Craftsman chainsaws. It is also compatible with Poulan and Poulan Pro chainsaws.

This starter hub is a genuine Husqvarna part, sold individually. This starter hub can be used as a replacement part for chainsaws. The starter hub for a chainsaw is a component of the recoil starter mechanism; the starter rope is coiled around a pulley that is held in place by the tension of a spring, and that spring is attached to the starter hub. The function of the starter hub is to rotate the pawls of the flywheel such that the engine is activated.A starter hub might have to be replaced in the event that it suffers damage that impedes it from connecting to or facilitating the operation of the pawls of the flywheel. If the starter rope does not turn on the engine when pulled, this could be a sign of damage in the starter hub. The starter hub can suffer damage from general wear and tear or overuse, and if this is the case, it should be removed and replaced with this genuine OEM part before using the chainsaw again. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter hub is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

The recoil spring is a vital part of the starter mechanism in chainsaws. It will apply tension on the pulley, which allows it to retract the rope. Without a working spring, it will be difficult or even impossible to start the chainsaw. While the metal springs are durable, they could start to wear out over time and will no longer be effective. In addition, the springs could suffer damage or could become corroded. They could also be lost when making other repairs to the chainsaw. If there is any issue with the spring, it will require a replacement. This authentic OEM replacement recoil spring is sold individually. The chainsaw recoil spring is compatible with several brands including Poulan, Poulan Pro, Husqvarna, Jonsered, Craftsman.

This is an OEM replacement starter pulley kit designed for use with gas chainsaws. The starter pulley assembly replaces the components of your recoil starter that may fail due to normal wear and tear. The pulley and return spring react to the pull of the starter rope and then engage the flywheel. This is what fires the chainsaw engine. If the starter rope is not reacting or the flywheel is not engaging, there may be an issue with the starter pulley assembly. This repair can be completed with a screwdriver and pliers and doesn’t take a lot of time. This starter pulley kit is a genuine product from Husqvarna, and it is designed for use with Poulan, Jonsered, and Husqvarna engines and outdoor power equipment. This kit includes the plastic pulley, return spring, hub, and two screws for securing the unit. The housing, rope, and starter grip will be sold separately if replacements are needed.

This genuine Echo starter handle can be used as a replacement part for chainsaws, leaf blowers, leaf vacuums, and string trimmers. The function of a starter handle for one of these types of small engine appliances is to use in conjunction with a starter cord to power up the engine. It is meant for walk-behind appliances that are powered up by recoil starters.A starter handle might need to be replaced if it can no longer turn on the engine in conjunction with the starter rope. If the rope has permanently detached from the starter handle in a way that cannot be simply repaired or if parts of the handle have been damaged or have fallen off, the starter handle must be replaced with this genuine OEM part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This starter handle is compatible with the following brands: Husqvarna, Poulan, Weed Eater, and Paramount.

This screw is designed to be used in many different chainsaws to connect and hold together various components. The screw can be used on its own or placed with a nut in a pre-drilled and threaded hole. If a nut is going to be used, it is best to choose one with the same threading and finish as the screw that will be used. A screw can become damaged in many ways that will require a replacement. Corrosion, excessive stress, or high temperatures may weaken the screw. In some cases, the damage can cause it to break or become loose and no longer properly secure other components of the chainsaw. A visual inspection can help determine if corrosion is present or the screw is damaged or broken. If the screw is stripped, a bolt remover may be needed to remove it to make the replacement.This screw is a genuine OEM replacement part provided directly from the manufacturer. It is sold as an individual component. The screw is compatible with chainsaws created by Poulan, Poulan Pro, Craftsman, and Husqvarna. A screwdriver is needed to replace, remove, or install the replacement part.

This part is a recoil starter hub spring that is used on chainsaws. The recoil starter hub spring connects the starter hub and pulley and applies tension to the pulley.A new recoil starter hub spring may be needed if there is no longer tension. If any component of the retail starter hub spring is cracked, broken, or damaged, it will need to be replaced. The recoil starter hub spring may become worn out over time. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This recoil starter hub spring is a genuine Husqvarna part. It is sold individually. This particular recoil starter hub spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Poulan brand.

This replacement part is an oil vent assembly. This is a genuine replacement part made by Husqvarna. This part works directly with the oil vent to ensure the proper settings and operation of the engine and machine as a whole. A new oil vent assembly might be needed if the current one is missing or damaged in any way. If the vent has been obstructed or is too dirty to clean it might be time to replace this part. Work gloves are recommended when repairing or replacing this part as the oil can stain hands and be hard to clean. It is also recommended that the engine be powered off before attempting to replace this part. This oil vent assembly is a genuine OEM replacement part to ensure proper fit. This part is sold individually and is sourced directly from the manufacturer.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

This genuine replacement hand guard is installed in front of the forward handle by the chain brake, and is used to engage the brake that stops the chain while offering protection for the user. Over time, this part can become prone to wear or damage due to repetitive motion and frequent use of gas-powered chainsaws. It requires a replacement in order to ensure that all the parts are working properly and that the chainsaw can be operated with optimal safety in mind at all times. Always use a genuine OEM replacement when it comes to repairs on chainsaws and other lawn and garden equipment. This OEM chain brake hand guard is compatible with dozens of chainsaw models from Poulan and Husqvarna. Check the owner's manual for exact application and installation procedure. This hand guard does not include hardware that is required for installation or any additional components and is sold as a single unit. Always disable the engine before performing repairs on chainsaws and other small equipment for safety and allow the engine to cool completely.

This part is a handguard spring for a chainsaw. The handguard spring returns the handguard to the forward position when the handguard is released.A new handguard spring may be needed if the handguard no longer returns to the forward position when the handguard is released. If the spring is broken in any way, it will no longer work properly and will need to be replaced. The spring could become damaged or break after normal use due to normal wear and tear over time. If this is the case, it will need to be replaced. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment.This handguard spring is a genuine Husqvarna part. It is sold individually. This particular handguard spring is compatible with chainsaws that are manufactured by the Husqvarna brand and the Craftsman brand.

This chain brake is made to connect above the drum of a chainsaw. It has a metal band that goes around the drum and a handguard that also connects to the brake. When the guard is pressed forward, the brake band tightens on the clutch drum, making the chain stop immediately. The brake is pre-assembled and consists of both metal and plastic parts. The spring, brake band, and linkage are all metal, and the housing is plastic. A common chain brake problem is the brake band becoming worn out or damaged. This causes the brake to no longer stop the chain fast enough or at all. This can be incredibly dangerous, so it’s important to check the brake regularly. Installing a new chain brake is straightforward with this genuine OEM part sourced directly from the manufacturer. Just remove the clutch cover assembly, take off the old chain brake, and screw in the new kit. Be sure to wear gloves and let the engine cool completely before making repairs. Compatible with Craftsman, Poulan, and Poulan Pro chainsaws. Sold individually.

This is an OEM replacement chainsaw bar plate for select brands and models of chainsaws. The chainsaw bar plate is responsible for holding the chainsaw guide bar in place and providing a secure foundation to reduce vibrations, while also spacing the bar from the chassis. The plate itself can become loose over time, or can even become damaged and lead to things like oil leaks from a loose chain. If the bar plate is in disrepair or not functioning correctly, it should be replaced immediately. this genuine replacement part can provide an exact fit for compatible saws. This OEM bar plate is manufactured by Poulan and will fit a number of chainsaws from the brand Craftsman, as well as those from Husqvarna and Jonsered. This durable part is made from high-quality metal and can be replaced with only a few tools. The plate is sold individually as a single unit. Hardware is not included and will have to be purchased separately if it is required. Always wear gloves and disconnect the spark plug before beginning repairs on chainsaws.

This clutch washer kid includes a clutch, a washer, and a clip. A washer helps to protect the engine from unwanted pressure at the joint where two parts connect. Washers help to spread the pressure evenly so that the fastener doesn’t move, which would cause corrosion and friction. Washers can wear down or corrode over time, leading to unwanted pressure in the chainsaw’s engine. Based on the location of this washer, replacing it may require different steps to take apart the engine. Be sure that the engine has cooled completely before attempting any repairs. This part is compatible with Poulan and Craftsman chainsaws and is a genuine OEM part sourced directly from the manufacturer.

This part is a replacement isolator spring. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective isolator spring in a variety of chainsaw models.The isolator spring is located in-between the chassis and the handle. This part helps to reduce the amount of vibration caused during use and is essential for safe and comfortable use of the chainsaw. Springs may become stretched, corroded, snapped, or rendered ineffective over time or with regular use, requiring replacement. When working on or near an engine, it's important to ensure that the equipment is powered off and completely cool before beginning any repairs. For more accurate information on how and where to install this isolator spring, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this isolator spring is suitable for use on chainsaws manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This front isolator spring assembly is located on the front handle on many chainsaws from top manufacturers. The front isolator spring assembly prevents vibrations so the chainsaw can be more easily used ergonomically. Over time, the front isolator spring assembly can become damaged or broken and will need to be replaced. If it is not replaced, far more vibration will be felt when using the saw, which may make it difficult to operate.When replacing the front isolator spring assembly, the user will need a socket set, a pair of pliers, and a screwdriver. The process is simple but can take some time. First, the handguard will need to be removed to gain access to the spring assembly. Use tools to remove the front isolator spring assembly. The new part can be installed before reassembly.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual unit. The front isolator spring assembly is made for use with chainsaws manufactured by Craftsman, Poulan, and Poulan Pro.

This replacement part is a front handle intended for use in lawn mowers. This is a genuine replacement part made by Husqvarna. Handles are essential to helping the user guide the machine in the correct direction.A new front handle might be needed if the current one is broken or damaged in any way, including being dented, bent, or cracked. It is common that this part will need to be replaced after years of normal wear and tear. Be sure the appliance is completely powered down and cooled off before attempting to replace this part. It is recommended that the user refer to the appliance manual for more detailed instructions on how to install this part. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with lawn mowers made by Husqvarna.

This part can be used to replace a deteriorating or leaking oil pick-up in chainsaws. An oil pick-up is essential for a smooth-running piece of equipment, as it supplies oil to the engine. Over time, oil pick-ups can become worn, which can cause leaks and prevent the engine from receiving the necessary supply of oil to operate properly. This part is manufactured from high-quality, durable plastic and non-corrosive metal. This assembly pick-up oil tank is a genuine OEM replacement part that has been sourced directly from the manufacturer. This replacement assembly pick-up oil tank fits various different models of Husqvarna and Poulan chainsaws. Please note this part is sold individually.

This replacement part is a screw and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Screws are an important part of many different types of machinery as they hold other parts in place and secure. A new screw might be needed if the current ones are loose or missing. It is common that screws might become stripped overtime and will need to be replaced. Be sure to double check the size of the screw as many places on lawn equipment will require different size screws. Be sure the appliance is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

Chainsaws generate a great deal of heat and friction, but the oil pump systems that keep the situation under control. They do this through the use of chainsaw bar oil poured into a reservoir. It remains in the reservoir until the throttle is engaged which then cues the pump to spray oil out of a port and smear it on the bar and chain to reduce friction and heat. The use of the oil pump is crucial, and this OEM oil pump assembly is a full replacement for times when a chainsaw is not getting adequate oil on the bar. It works with Poulan, Craftsman, Poulan Pro, and others. This project requires only wrench and screwdriver sets to perform the repair. It ships as an individual kit ready for full replacement of the original oil pump.