Parts for Weedeater WT6000: Chassis / Deflector Parts

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

This shoulder bolt is a genuine Husqvarna part, sold individually. This shoulder bolt can be used as a replacement part or a string trimmer. The purpose of a shoulder bolt is to serve as a fastening component of a lawn mower or a string trimmer in conjunction with a nut, so several components within the infrastructure of the appliance are held together and secured in place.The shoulder bolt might be easily lost or misplaced or could be damaged over time. If the shoulder bolt is stripped, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This shoulder bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are commonly found in many appliances and assist in connecting certain parts so that the appliance is able to run smoothly. A new spring might be needed if the current one is stripped down or is no longer functioning properly. This can be due to normal wear and tear after years of use. Due to the nature of certain springs, these parts can snap under pressure and should be replaced if this is the case. Work gloves are recommended when replacing this part as this spring is often found close to other dangerous parts. This specific spring is sold individually and is sourced directly from the manufacturer for long-lasting use. This part is a genuine OEM replacement part to ensure proper fit.

This replacement part is a bottom deflector, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bottom deflector is found in many types of lawn mowers and essentially protects the user from getting hit with flying grass clippings or debris. This deflector piece is made of quality plastic and ensures that the debris is dismissed out the back of the device. If the user notices that the current bottom deflector is not working properly, it is recommended that it be replaced. If debris or grass clippings are flying up in the user's vision, it could be dangerous as their line of sight can be compromised. Be sure to replace this part as soon as possible if it is malfunctioning or missing. This bottom deflector is sold as a single part. It is also a genuine OEM replacement part and sourced from the manufacturer.

This split lock 3/8 washer can be used in a variety of lawn and garden tools. It functions as a component that prevents nuts and bolts from loosening due to vibration when a tool is in use. It’s a split ring with a helical shape, and when fastened together, it exerts a force on the fastener for resistance to motion and increased friction. Typically, this washer is attached on the nut side of a fastener. Over time, the split lock 3/8 washer can start to wear, degrade, or fall apart. This leads to a need for replacement in order to keep the other tool components in the best shape. A flathead screwdriver can be used to pry the washer loose from the bottom or from the split in the washer. Tools needed might include ratchets, wrenches, and a screwdriver. This is a genuine OEM washer known as a 3/8 lock or 3/8 split lock washer and comes as an individual item. It’s gold in color and made out of metal. It can be used for lawnmowers, snowblowers, string trimmers, tillers, wood chippers, and edgers by Husqvarna, Craftsman, Ryobi, Poulan, Weed Eater, Ariens, Murray, and Dixon.

This spindle housing assembly is a genuine Husqvarna part, sold individually. This spindle housing assembly can be used as a replacement part for a string trimmer. The purpose of the spindle housing assembly is to provide a casing for the spindle of the string trimmer, which operates as a component that facilitates the rotation of the blades so the appliance can cut through greenery.The spindle housing assembly might have to be replaced if it is compromised or damaged to the point that the spindle is exposed. If the spindle housing assembly is damaged, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle housing assembly is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.