Parts for Weedeater WT6000: Engine / Control Bar / Wheels Parts

This replacement part is an idler pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This idler pulley is commonly found in weed trimmers and is an important part of this appliance. Idler pulleys provide tension and guide the engine drive belt so that the appliance runs smoothly overall. A new idler pulley might be needed if the machine is not working up to standard or the user notices that the spinning or turning mechanism of the weed trimmer is not working properly. Be sure the machine is powered off before attempting to replace this part as it is located near the engine and can be dangerous. It is also recommended the user wears working gloves for protection. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.

This control bar is a genuine Husqvarna part, sold individually. This control bar can be used as a replacement part for a string trimmer. The control bar provides a component for the user to pull down on in conjunction with the handle in order to start up the rotation of the string trimmer; when the control bar is released, the string trimmer ceases rotation.The control bar of a string trimmer might have to be replaced at some point within the lifespan of the appliance if it suffers enough damage to render it without function. If the control bar does not turn on the appliance when it is pulled or if the engine remains powered on and the string trimmer continues to rotate when the control bar is released, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This control bar is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This flanged hex nut is used in various models of lawn and garden equipment. The nut is considered a standard hardware part that may have multiple applications on different units. It is typically used along with a bolt or screw to provide a secure hold for various components. This nut is a small part and can become lost in the process of other repairs. It can also break or strip the threads due to regular wear and tear, impact damage, or another issue. If this nut is broken or missing, it needs to be replaced immediately. Replacing the hex nut with a genuine OEM part will ensure equipment is always in proper working order. This OEM hex nut is designed for use in select Craftsman and Husqvarna equipment. It is manufactured by Husqvarna as an exact replacement for the original nuts that came with the machine. This part can fit on more than 150 machines, including lawn mowers, tractors, snow blowers, and trimmers from both brands. Owners will want to check their parts diagram for the exact location(s) and application(s) of this nut. Since it is standard hardware, some people purchase multiple quantities to keep extra parts on hand in case of emergency.

This high-quality drive control cable is used on wheeled trimmers and lawnmowers. The control cable is the part that causes the blade to stop when the control handle is released. It connects the drive control lever to the transmission so the equipment will move or stop when going across the lawn. If the cable is broken or becomes damaged, the brake will not release even if the lever is pressed. If the lawn equipment no longer stops or doesn't move when it should, the drive control cable likely needs to be replaced. Remove the spark plug wire from the spark plug and then release the cables from the handle. Take off the drive cover and remove the drive control cable. Once it has been removed, the new replacement part can be installed before reassembling the other components.This drive control cable is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part and includes a rubber insulated cable. This component is made for use with lawnmowers and string trimmers created by Poulan, Craftsman, Weed Eater, and Husqvarna.

This replacement part is a cable clamp. This is a genuine replacement part made by Husqvarna. Cable clamps are used in various situations to ensure that certain wires and cables are able to stay in the correct spot so that the user is able to operate the machine properly. A new cable clamp might be needed if the current one is missing or damaged. This can include being stripped over time. It is not unusual for cable clamps to need replacing after years of normal wear and tear. Ensure that the engine is completely turned off and cooled down before replacing this part. Work gloves are also recommended when working with or near wires. This part is sold individually and is sourced directly from the manufacturer. This part is a genuine OEM replacement part to ensure proper fit and long-lasting use.

This hex screw is a genuine Husqvarna part, sold individually. A hex screw can be used as a replacement part in a lawn mower or a string trimmer. This screw is a small fastener.The hex screw in a lawn mower or a string trimmermight be lost or damaged. If this occurs, the hex screw should be replaced by this genuine OEM replacement part in order to guarantee the safe continued use of the appliance by its operator. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This hex screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Poulan Pro.