Parts for Dixon 965882001: Chassis / Frame Parts

This part is a nyloc nut. This specific nut is used in many different applications depending upon the outdoor power equipment machine that it is used on. This nut has a nylon collar insert that resists turning when it has been threaded on correctly. The nyloc nut is a type of lock nut, which prevents loosening when it's exposed to vibrations. It helps fasten parts together.A new nyloc nut may be needed if the original one has been broken, damaged, or lost. If the nyloc nut is no longer staying in place when it is exposed to vibrations and the operator can notice the parts loosening, then the nyloc nut will need to be replaced.This is a genuine OEM part sourced directly from Husqvarna. It is sold individually. This nyloc nut is used on snowblowers that are manufactured by both Husqvarna and Craftsman.

This part is a replacement bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost bolt in outdoor power equipment.Bolts are a standard piece of hardware that ensure equipment components are properly and securely fastened together. Bolts can easily become stripped, corroded, broken, or lost over time and will thus require replacement. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this bolt is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.

This knob is a genuine MTD part, sold individually. This knob can be used as a replacement part in a lawnmower or an edger.The knob in a lawnmower or an edger might need to be replaced at some point within the typical lifespan of the appliance if it is faulty, damaged, or worn out from general wear and tear with long-term use. If the knob has fallen off, if pieces of it have chipped away over time, or if the knob is simply too damaged to serve its typical function, the knob should be removed and replaced by this genuine OEM replacement part. It is a very simple replacement process that will only require basic tools to properly execute.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This knob is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement hex nut. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or lost hex nut in lawn tractors and other outdoor power equipment.Hex nuts are a standard piece of hardware that ensure components can be properly and securely fastened together. They will need to be replaced with a genuine OEM part if stripped, corroded, damaged, or lost. When working on or near an engine, it's important to make sure the equipment is powered off and completely cool before starting any repairs. For more accurate information on how and where to install this hex nut, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex nut is suitable for use on outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please note that this is a genuine part made of high-quality, durable metal and is sold individually.

This front suspension link is a genuine MTD part, sold individually. This front suspension link can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the front suspension link is to secure the steering shaft of the appliance so its components are maintained and stabilized in their placement.The front suspension link might have to be replaced at some point within the standard lifespan of the appliance in the event that the component suffers damage that renders it incapable of performing its stabilizing function. If the components linked by the front suspension link are no longer held in place by this component or if the front suspension link is damaged in the form of puncturing, scraping, eroding, or any other visible damage, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This front suspension link is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This part is a replacement hex bolt. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a misplaced, stripped, or defective hex bolt in outdoor power equipment.Hex bolts are a standard piece of hardware that have many different uses. They are named for their hexagon-shaped heads and are critical for securely holding together different equipment parts but can become corroded, stripped, or misplaced, requiring replacement. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this hex bolt, the appropriate owner's manual and equipment diagrams should be utilized.As an authentic replacement part, this hex bolt is suitable for use on several outdoor power equipment manufactured by Husqvarna, Poulan, and other brands. Please This is a genuine part made of high-quality, durable metal and is sold individually.

This washer is a genuine Husqvarna part, sold individually. This washer can be used as a replacement part in a lawn mower. The purpose of the washer in a lawn mower is to serve as a small fastening component that can reduce the friction between two or more components.The washer in a lawn mower can be easily lost or misplaced during the operation of the appliance as it is a particularly small component that can go missing without alerting the operator of its absence. If this occurs, the washer should be replaced by this genuine OEM replacement part. Additionally, the washer can be subject to stripping over time, in which case it should also be immediately replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This washer is compatible with the following outdoor appliance brands: Husqvarna and Dixon.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a hair pin and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. Hair pins are an important part of many different types of machinery as they hold other parts in place and secure. A new hair pin might be needed if the current ones are loose or missing. It is common that hair pins might become stripped overtime and will need to be replaced. Be sure to double check the size of the hair pin as many places on lawn equipment will require different sizes of this part. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of the nut in a lawn mower is to serve as a fastening component within the internal mechanisms of the appliance, in conjunction with a bolt, to keep one or more components in their stable placement.The nut in a lawn mower might be subject to damage during the typical lifespan of the appliance that could render the nut beyond functionality. The nut can also be easily lost or misplaced during the lifespan of the appliance as it is a small component that can disappear without necessarily notifying the user of the appliance of its absence. If the nut is lost, misplaced, or sufficiently damaged to the point of reduced or no functionality, the nut should be replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with products from Husqvarna.