Parts for Dixon 965882001: Ignition Parts

This fuel cap is a genuine Husqvarna part, sold individually. This fuel cap can be used as a replacement part in a lawn mower. The purpose of the fuel cap in a lawn mower is to protect and cover the fuel line and the fuel tank.The fuel cap in a lawn mower should be immediately replaced if it shows signs of damage. Damage to a fuel cap can take the form of puncturing, tearing, ripping, denting, warping, or eroding to the point of exposing the internal mechanisms of the appliance to the elements. If this occurs, the fuel cap should be removed and replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This fuel cap is compatible with the following outdoor appliance brands: Husqvarna and Craftsman.

This replacement part is a choke cable. It restricts the flow of air in a carburetor, which helps the engine start and run smoothly. If the engine is not starting smoothly, the choke cable may have been damaged or worn and should be replaced. When working on or near an engine, gloves should be worn for safety.This is a genuine OEM replacement part manufactured by Husqvarna. This part is sold individually.

This interlock switch is a genuine Husqvarna part, sold individually. This interlock switch can be used as a replacement part for outdoor appliances with small engines such as a lawnmower or lawn tractor. The purpose of an interlock switch is to make sure that the engine of the appliance will not start unless the brake is pressed. The primary symptom of a damaged interlock switch is an engine that turns on even when the foot is not actively pressing down on the brake. This is a simple repair process that will only require a wrench set to conduct. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This interlock switch is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Craftsman.

This genuine replacement Husqvarna carriage bolt can be used in the infrastructure of several different kinds of appliances that require small engines, including lawn mowers, leaf blowers, lawn tractors, line trimmers, snowblowers, wood-chippers, and generators. Carriage bolts are distinguished by their round heads and flat tips. Their function as a fastener, in conjunction with nuts, is to attach materials or components to one another, wood and metal components in particular. There are several reasons that a carriage bolt might have to be replaced, including misplacement of a carriage bolt, as the part is relatively small and can disappear without immediate consequence. Other reasons to replace a carriage bolt can include damage from overuse, exposure, or age; this damage can manifest in the form of visible erosion, cracking, or piercing that prevents the carriage bolt from properly fastening materials to one another. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carriage bolt is compatible with the following brands: Husqvarna, Poulan, and Craftsman. Part sold individually.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower. The purpose of the nut in a lawn mower is to serve as a fastening component within the internal mechanisms of the appliance, in conjunction with a bolt, to keep one or more components in their stable placement.The nut in a lawn mower might be subject to damage during the typical lifespan of the appliance that could render the nut beyond functionality. The nut can also be easily lost or misplaced during the lifespan of the appliance as it is a small component that can disappear without necessarily notifying the user of the appliance of its absence. If the nut is lost, misplaced, or sufficiently damaged to the point of reduced or no functionality, the nut should be replaced by this genuine OEM replacement part. Always unplug the appliance before performing any kind of repair or replacement.Sourced directly from the manufacturer, this component is a genuine replacement part that is sold individually. This nut is compatible with products from Husqvarna.

This replacement part is a flange nut. It is a genuine replacement part made by Husqvarna. This part is small yet extremely important to the operation of many different appliances and machines. Nuts are able to hold other parts in place and secure them tightly so that everything can operate smoothly and efficiently. A new flange nut might be needed if the current ones are damaged in any way or even missing. This repair should be fairly easy and only require a screwdriver or pliers if the previous part is lodged in place. It is possible that nuts can become stripped or stuck over time and should be replaced when and if this occurs. Be sure the engine is completely powered down before starting a repair. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. This particular spring is found in different types of lawn mowers and provides torque and other energy so that the engine works properly and efficiently. A new spring might be needed if the current one is missing or damaged in any way. It is common that they are put under too much pressure and can snap and need to be replaced. It is recommended that working gloves be worn since these parts can be dangerous to those handling them. Be sure to reference the appropriate user guide for more instructions on how to replace this part.This part is sold as a single piece. This spring is a genuine OEM replacement part and is sourced directly from the manufacturer to ensure proper fit and long lasting use.

This is a single washer for use with an assortment of lawn and garden equipment. The location of the washer will vary by tool and model. It's made of durable metal and can be used to distribute pressure across another component or can be used to add spacing between two parts. Since washers are small and experience a great deal of pressure, they can become damaged or even lost. If this occurs, other parts will make contact and pressure may not be appropriately distributed in a piece of lawn and garden equipment. If a replacement is needed, locate the area with the washer. Disassemble as needed to visually inspect the part. The washer can be removed by hand or with the help of a flathead screwdriver to pry it up. Replace the original washer with the replacement part and reassemble the equipment. The washer is priced as a single unit and is directly sourced from the manufacturer. It is an authentic OEM replacement component. It's compatible with a variety of string trimmers, tillers, snowblowers, and lawn mowers manufactured by Weed Eater, Husqvarna, and Craftsman.

Flat washers have multiple applications in lawn mowers and tractors, but are used to add additional security to various screws and bolts. These are made of durable metal, but they can still become worn or damaged over time. The flat washer is a useful part that needs to be in working order at all times for the most effective operation of your lawn equipment. In some cases, they can become lost or damaged during other maintenance. Replacing them is easy with this OEM flat washer. Refer to the user manual for various applications and locations of this washer, as each unit will have its own specifications. Always follow manufacturer instructions for installing hardware like this flat washer replacement. This genuine OEM washer is manufactured to exact standards by Husqvarna. It is designed to be used with several brands of lawn and garden equipment engines, including Weed Eater, Husqvarna, Poulan, Poulan Pro, Craftsman/Sears, and Roper. The part is silver in finish and is sold individually. Order multiple quantities as needed.

This nut is a genuine Husqvarna part, sold individually. This nut can be used as a replacement part in a lawn mower or an edger. The purpose of a nut in a lawn mower or an edger is to secure one or more components to a certain spot within the internal machinery of the appliance in conjunction with a bolt.A nut could be easily lost or misplaced as it is a very small component that can fall off or disappear from its area of placement; if this occurs, the nut should be replaced by this genuine OEM replacement part. The nut could also suffer from puncturing, denting, cracking, chipping, warping, or eroding that can mandate its removal and replacement.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This nut is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Dixon.