Chore Performer

Shoulder screws are a type of fastener used in many types of lawn and garden equipment. Also called stripper bolts or shoulder bolts, they have a head, threads, and an unthreaded shoulder. These screws are used in areas where items need to be held together in a specific location. They can be used with bearings, bushings, and machinery support. Shoulder screws are made of durable metal but can still experience breakage or damage. When this occurs, the screws will need to be replaced. A wrench can be used to remove the damaged shoulder screw. First, visually inspect the shoulder screw to look for damage or corrosion. Sometimes, the screw will be entirely broken. If any of these things are present, a wrench can be used to remove the old shoulder screw. The same tool can be used to insert a new shoulder screw before reassembling the equipment.Designed for lawnmowers, lawn tractors, tillers, leaf blowers, chainsaws, log splitters, chipper shredders, and snowblowers, this part is compatible with items from Yard Machines, MTD, Cub Cadet, Craftsman, Toro, Huskee, Montgomery Wards, Yard-Man, MasterCut, and Troy-Bilt. The locknut is sold separately.

This ball detent is a genuine MTD replacement part for appliances operated by small engines, including lawn tractors, lawn mowers, snowblowers, leaf blowers, chipper shredders, and tillers. The function of a ball detent is to temporarily keep two parts in place relative to one another, as one or both of the parts rotate.A ball detent might have to be replaced in the event that it suffers damage over time or is lost or misplaced. It is possible for ball detents to fall out of their spot, meaning that the parts that it ordinarily holds in place will not be able to rotate properly. Additionally, a ball detent might have to be replaced if there is material deterioration. If this occurs, a replacement ball detent part should be ordered and secured to the small engine appliance immediately. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This ball detent is compatible with the following brands: MTD, Yard Man, Yard Machines, and Troy-Bilt.

Replacement engagement handle for edgers. Installs on the control assembly. Order a new handle if yours is cracked, broken, or missing for proper operation.

This replacement part is a lower handle. This is a genuine replacement part made by MTD. This part is commonly found on a push lawn mower and is responsible for helping the user maneuver the machine and control the settings during use. A new lower handle might be needed if the current one is damaged in any way. This can be due to normal wear and tear over time or a singular incident. If the bar is dented, cracked, or bent, it might be time to replace it. If the user is no longer able to operate the machine using the lower bar, it is recommended that it be replaced as soon as possible. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Seals the fuel tank on lawn tractors, mowers, and snow blowers. Replace if cracked, loose, or leaking to prevent fuel evaporation and contamination. Verify fit with your model number.

Wood not splitting properly or getting jammed? This log splitter wedge assembly guides wood through the splitting mechanism. Durable metal construction.

An idler pulley is an essential part of many small and medium sized gasoline powered tools. This idler pulley is used in equipment such as tillers, lawn tractors, log splitters, edgers, snow blowers, and trimmers. The idler pulley is necessary so that the engine can run without the tool's moving parts being engaged. For instance, a lawn tractor running without the cutting blades turning or the wheels rolling. Once the idler pulley is engaged, the blade begins to turn. There is a great deal of resistance encountered by the idler pulley each time the equipment's tools begin to turn. Over time, the pulley can become worn and will eventually need to be replaced. If there is a squealing sound whenever the moving parts of a lawn tool are engaged, it is probably a sign that the idler pulley is about to fail. The pulley itself is attached to the engine housing with 9/16 hex bolts and requires an adjustable wrench and 9/16 ratchet to remove and replace. Always use a genuine OEM manufactured replacement part such as this one when replacing the original, as this part is identical to the original. This part is compatible with equipment manufactured by Bolens, MTD, Cub Cadet, Huskee, and Troy Bilt.

Replace worn or dull flail blades to restore chipping performance. Essential wear part for efficient shredding. Verify compatibility with your model.

Replacement locking rod for log splitters. Secures and fastens components together. Order a new rod if yours is bent, broken, or missing.

This is a ferrule from MTD. This particular ferrule is designed for use in the lawn mower's driveshaft. The wire rope (or tension spring) is attached to the variable speed pulley and engages the driveshaft/transmission system.A faulty ferrule on a lawn mower may cause the wire rope to snap or become disconnected from the driveshaft. The rope doesn't necessarily have to break to signal a malfunctioning ferrule. The rope may lose torque and cannot provide the tension needed to make adjustments to the driveshaft. In simpler terms, the lawn mower may lose its ability to shift between different speeds.The ferrule is located near the variable speed pulley (drive pulley) of the lawn mower. The deck will need to be removed to make any repairs to the ferrule. The belts will need to be removed also. Always make sure the brake is engaged before starting any repairs on this section of the lawn mower. This part is compatible with Craftsmen, TroyBilt, and MTD lawn mowers.

This is a quality clevis pin that is made for many types of lawn and garden equipment. It secures two components together. A clevis pin has a hole at the end where a cotter pin can be attached to secure it in place. Clevis pins can become damaged or corroded over time, which will require them to be replaced.If a damaged clevis pin is difficult to remove, it can be sprayed with penetrating oil and allowed to sit for several hours. This should make it easier to remove the cotter pin from the clevis pin. If it doesn't budge, use a pry bar to loosen the clevis pin.This is an authentic OEM replacement clevis pin directly sourced from the manufacturer. It is sold as a single pin. The clevis pin is designed to be used with lawnmowers, tillers, and snowblowers manufactured by MasterCut, Yard-Man, Bolens, Montgomery Wards, Huskee, MTD, Yard Machines, Husky, Troy-Bilt, Ryobi, Cub Cadet, and Craftsman.

This replacement part is a spacer. This is a genuine replacement part made by MTD. This part helps prevent friction within the machine as well as minimize noise during use. A new spacer might be needed if the current one is missing or damaged in any way. Spacers experience friction over time and become worn down after years of normal use. If the user hears unusual noises coming from the machine, it might be a spacer that has become damaged or out of place. Be sure to refer to the user guide for more information on how to replace this part. This spacer is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer.

Hex nut fastener for lawn tractors, tillers, and other outdoor power equipment. Secures components throughout the machine. Replace if stripped or missing.

Hex nuts are a common type of nut used with bolts, anchors, studs, and screws. These nuts are often present in lawn and garden equipment like lawnmowers. A hex nut has a hexagonal shape with machine screw threads and can be used with lock washers. Hex nuts are made of durable metal but can become damaged, corroded, or even break over time.Visually inspecting the hex nuts on lawn equipment will provide information about whether it's damaged or broken. This might be seen as a dent, a misshapen nut, or a nut that has broken in half. If these things are present, the hex nut will need to be replaced. Remove the hex nut using a socket wrench and socket and then place a new one on the machine. Once it has been situated, tighten the nut so it holds the other parts stable before using the machine.This hex nut is a genuine OEM replacement part sourced directly from the manufacturer. It comes as an individual component. The part can be used in lawnmowers, log splitters, snowblowers, tillers, and string trimmers made by Craftsman, Toro, Cub Cadet, Troy-Bilt, Murray, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, and MasterCut.

This genuine OEM replacement nut-hex center is used on lawnmowers, wood chippers, snowblowers, chainsaws, tillers, edgers, and log splitters. Hex is short for hexagon, which means this nut has 6 sides. This hex center locking nut is one piece and made of all metal. As the nut is made from metal, it is not compromised due to high temperatures.The purpose of this center locking nut is for fastening to a hex cap screw, socket cap screw, or bolt. Given that these center nuts will stay put without being seated, they are ideal to be used as stop nuts or spacers for rotating or other components. These nut hex centers contain internal threads and are driven with a wrench. These center nuts are reusable for a limited number of times, as the torque declines after each use. The user will want to ensure the threads of the nut are not compromised before using. It is recommended to use a new nut over a used one. This replacement nut is compatible with Craftsman, Cub Cadet, Ryobi, Yard Machines, MTD, Husky, Yard-Man, and MasterCut devices. This Nut-Hex Center is sourced directly from the manufacturer and is sold individually.