Chore Performer

Shoulder bolt that secures the wheel to the frame on lawn mowers, edgers, and tillers. Replace if bolt is stripped, broken, or missing for proper wheel attachment.

Flange bearing for snow thrower auger and drive systems. Replace if you notice unusual noise, vibration, or difficulty operating. Verify fit with your model.

Needle bearing for lawn mowers and outdoor power equipment. Replace if you notice excessive noise, wobbling, or rough operation. Verify fit with your model.

This replacement part is a clutch cable. This is a genuine replacement part made by MTD. This clutch cable is able to assist the user in controlling certain aspects of the engine. If the clutch cable is in working order the user will be able to start and stop the engine as well as adjust the settings during use. A new clutch cable might be needed if they are unable to control certain settings of the machine or appliance. The wires in the cable can become stripped or worn down over time. If this is the case it is recommended that it be replaced. Be sure the engine to the appliance is completely shut down so that the user is safe during the repair. This clutch cable is sold individually and is sourced directly from the manufacturer. This is a genuine OEM replacement part.

Control cable for chipper shredders. Connects operator controls to clutch mechanism. Replace if cable is frayed, broken, or no longer engaging properly.

Here is a replacement control handle assembly for use with chippers and similar machines. The assembly is the part of the machine that allows the user to control the function of the machine. Control handles tend to be well-made and durable, and they can last a long time on the machines. However, owners may find that they will eventually need to replace the handle assembly. The handle could break, there could be corrosion or a break on the lever, or one of the connecting pieces, such as a pin, could become lost or broken. When dealing with a problematic control handle assembly, it is often a good idea to replace the entire assembly, not just a piece of it. This is a genuine OEM replacement control handle assembly for log splitters and wood chippers. The control handle assembly is sold individually, but it does contain the parts that are needed to replace and affix the handle to the machine. The part can work with more than 150 different machines, and it is compatible with Cub Cadet, Yard Machines, MTD, MasterCut, and Yard-Man.

Flange bearing supports radial and light axial loads in lawn mowers and tractors. Replace if you notice wobbling, noise, or difficulty steering. Verify fit with your model number before ordering.

This is a pawl that can serve as a replacement for some mower models, as well as chippers and shredders. The pawl attaches to the ratchet pawl plate. The pawl is essential for starting the engine. When the starter turns, the pawl is forced outward and locks onto the flywheel, allowing the engine to start. When the starter rope is let go, the springs pull back the ratchet pawls. If there is damage to the pawl, the engine will not start.The piece is made from durable metal, and it is built to last. However, it can start to wear down over time. Additionally, there is the potential that it could corrode. If there are issues with the pawl, replace them as soon as possible to ensure their machine continues to operate properly.This pawl can work with select models from MTD, Troy-Bilt, Yard-Man, Cub Cadet, and Husky. The piece is a genuine OEM replacement part sourced from the manufacturer. It is sold individually.

This replacement part is a pinion gear. This is a genuine replacement part made by MTD. This part is small but important to many different appliances. Pinion gears have ridges that are able to connect to other parts and typically rotate or turn in specific ways so that the engine operates properly.A new pinion gear might be needed if the current one is stripped down due to friction over time. If the user hears noises coming from inside the machine, the gears may be out of place or damaged. Work gloves are recommended during this repair. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer."

Replacement spacer for lawn mowers and tractors. Installs between components to maintain proper clearance. Order a new spacer if worn or missing.

Propels your snow blower forward during operation. Replace if worn, slipping, or damaged to restore proper drive function. Verify fit with your model.

Replacement bag assembly for chipper shredders. Catches grass clippings, mulch, and debris. Needed when your current bag is torn, unraveling, or worn out.

Weak suction or poor debris collection? This vacuum impeller generates airflow for chippers, shredders, and lawn vacuums. Restores pickup performance.

This is replacement trimmer line with a 0.155-inch diameter, used in string trimmers to cut grass and weeds. The line feeds through the trimmer head and spins at high speed to slice through vegetation. Replace the cutting line when it becomes too short, breaks frequently, or is worn down from use.