Parts for Mtd 31CH97SJ799: Chute / Handle Parts

If your snow thrower's controls feel loose or unresponsive, this joint assembly links components and transfers motion. Moderate difficulty repair part.

Carriage bolt fastener for lawn and garden equipment. Replaces worn, stripped, or missing bolts that secure deck components and attachments.

Carriage bolt for lawn mowers, snow blowers, tillers, and edgers. Works with a nut to secure metal components. Replace if worn, stripped, or missing.

Flange lock nut secures components on mowers and outdoor power equipment. Replace if stripped, corroded, or missing to restore proper fastening.

This is a genuine 5/16 hex nut, a standard piece of hardware used to affix various components securely. This MTD nut is used in multiple applications and has several placement options depending on the model of the engine. Nuts can become stripped or worn

Replacement fastener for lawn mowers and outdoor power equipment. Secures components and panels. Order a new one if yours is stripped, missing, or damaged.

Secures pins and shafts on lawn tractors and riding mowers. Replace if bent, missing, or worn. Bow-tie design inserts through pre-drilled holes.

Spring roll pin fastener for snow thrower assemblies. Secures moving parts and linkages. Replace if pin is missing, worn, or falls out during operation.

Star knob connects upper and lower handles on lawn mowers and outdoor equipment. Replace if threading is worn, cracked, or knob is missing for secure assembly.

This part is a replacement push nut. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or detached push nut in snow blowers.Push nuts are a special type of fastener

Rubber grommet for snow blower assembly. Fits through mounting holes to protect wires and cables. Replace if cracked, torn, or missing.

This is a replacement bell washer, a flat washer that can be used with a wide range of various types of lawn and garden equipment. The inner dimension of this washer is 0.40 inches, while the outer dimension is 0.88 inches. Washers are typically used as a

The replacement flat washer here is a part commonly found on many types of small engines, including those in lawn and garden equipment. The washer can be used on various parts of the engine depending on the make and model. The washer can help to spread the pressure of the connection over a wider surface area. This will help reduce damage to the machine at the connection point. The washers are made from metal and there may be a need to replace them. If they have become corroded, bent, or lost, they should be replaced right away. Owners should keep in mind what with some models, the washers will be secured with the use of a push pin. The push pins are sold separately. This is an authentic OEM replacement flat washer that is sold individually. The washer can be used on many types of equipment including lawn mowers, snowblowers, tillers, string trimmers, leaf blowers, edgers, log splitters, and wood chippers. Compatible brands include Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Husky, Yard Machines, MTD, Huskee, Montgomery Wards, Bolens, Yard-Man, Turf King, and MasterCut.

This is a bushing made from black plastic with a cleft down the middle to provide enough flex for easy insertion. It has a flanged design, which means it won’t easily pop out after installation, even under stress from constant vibration. The bushing’s pri

E-ring retaining clip for snowblower assemblies. Secures pins and shafts in place. Replace if bent, missing, or worn to restore proper retention.

This is a seven-inch cable tie that is used with different types of lawn and garden equipment. It is most commonly used to secure the cable onto the handle of the lawnmower or tiller so it is secure. The cable tie is made of durable plastic but can be dam

This trigger is a genuine MTD part that can be used as a replacement part for a snowblower operated by power steering. The trigger is located under the handlebars of a snowblower and functions as a crucial feature of the appliance's power steering capabil

Steering trigger pin for snowblowers. Secures the steering trigger mechanism. Replace if pin is bent, sheared, or missing to restore proper control.

If your snowblower won't start or has unresponsive controls, replace the control assembly. Direct fit for multiple snow thrower models. DIY repair.

Hex screw for lawn tractors, mowers, snow blowers, and tillers. Replaces broken, stripped, or missing screws in various assembly points.

This is a versatile screw designed with flanged hex head and double-lead threads. It is a high-low self-tapping screw with one thread that is high and the other low for easier penetration. The twin threads also reduce the amount of material displaced when

A flange lock nut, also known as a flange lock or a lock nut, is created to be used in various types of lawn and garden equipment. This flange lock nut holds other parts in place and, when properly threaded, will resist loosening. Over time, a flange lock

Replacement chute assembly for snowblowers. Directs expelled snow away from equipment. Replace if cracked, damaged, detached, or missing from unit.

Replace your snow thrower's cable bracket if it's cracked, broken, or missing. This mounting bracket secures control cables for proper operation.

Replace your snowblower's clutch handle assembly if the original is cracked, broken, or worn. This handle installs on the control panel for operator control.

Handle panel assembly for gas snowblowers. Mounts to control area of machine. Replace if cracked, broken, or damaged from impact or wear.

Replacement spring for snow blowers, mowers, tillers, and trimmers. Restores tension and function when original spring is broken, stretched, or missing.

This replacement part is a cable assembly. This is a genuine replacement part made by MTD. This cable assembly is made up of many different wires and is responsible for connecting certain parts together so that they may work in tandem during use. A new ca

Pivot rod for gas snow throwers. Connects control lever to moving components. Replace if bent, broken, or worn to restore proper mechanical operation.

Fastening screw for snowblower component assembly. Replaces lost, stripped, or damaged screws that secure panels, covers, or internal parts.

Replaces a damaged, stripped, or missing oval screw on your lawn tractor or outdoor power equipment. Used to secure covers, panels, and components.

Replace missing or damaged socket screws in your snowblower. Fastens components securely. Often lost during maintenance or repair work.

Hex nut with thread-locking patch for snow thrower assembly. Secures components throughout the machine. Replace if stripped, missing, or damaged.

Replacement shift knob for snowblower control lever. Installs on the shift rod to adjust speed and direction. Replace if cracked, broken, or missing.

LED headlight assembly for snowblowers. Replace if light fails, dims, or cracks from impact. Verify fit with your model number before ordering.

This part is a replacement lock plate. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken or defective lock plate on snowblowers. This lock plate works by

Snowblower won't engage or auger slips during operation? This cam clutch lock secures the drive mechanism. Common repair for engagement issues.

Clutch lock spring for gas snowblowers. Secures the clutch mechanism in position. Replace if spring is stretched, broken, or missing to restore proper function.

This part is a replacement handle lever bumper. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or misplaced handle lever bumper in snow blowers.

Flat washer for lawn tractors and outdoor power equipment. Replaces worn, missing, or damaged washers. Ensures secure fastening of components.

Shoulder screw for gas snowblowers and walk-behind mowers. Replace this fastener if worn, stripped, or missing to secure moving components properly.

Shoulder screw fastener for gas snowblowers. Secures components with precise spacing. Replace if threads are stripped, head is damaged, or screw is missing.

Snowblower headlight lens protects the bulb and ensures visibility during low-light operation. Replace when cracked or clouded. Verify fit with model.

Replacement chute tilt cable for snow blowers. Controls the angle adjustment of the discharge chute. Replace if worn, frayed, stretched, or snapped.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.