Parts for Kitchenaid 5KSM150PSEEB4: 01 - Color Variation Parts

This replacement gear housing secures and encloses the drive gears that transfer motor motion to the washer's agitator/drive assembly, restoring proper mechanical drive function and reducing noise from worn or damaged housings. What it does:

• Houses and supports the drive gears that transfer motor rotation to the agitator/drive mechanism
• Prevents gear misalignment and keeps lubricant contained for smooth operation
• Commonly used when the washer makes grinding, grinding-like, or unusually noisy operation
• Can resolve symptoms like lack of agitation or intermittent drive engagement caused by a broken or cracked housing

• Disconnect power (and water if applicable) before beginning any repair
• Remove access panels and drive components per service manual to access the housing
• Inspect gears, seals, and fasteners; replace any damaged components before reassembly
• Test the appliance on a short cycle after installation to confirm proper operation

A replacement housing that secures and protects the appliance's internal components and mounting points. Restores structural support and helps reduce vibration or movement caused by damaged or cracked housings. What it does:

• Provides a stable mounting surface for internal assemblies and fasteners
• Protects internal parts from debris and accidental contact
• Restores proper alignment to reduce noise, vibration, and movement
• Addresses visible cracks, broken mounting tabs, or warped housing edges that compromise fit

• One housing

• Disconnect power and water before beginning any repair
• Handle edges carefully; use gloves to avoid cuts from sharp sheet-metal or plastic
• Basic hand tools required; follow the appliance service manual for disassembly/reassembly
• If mounting tabs or adjacent parts are damaged, inspect and replace those items as needed for a complete repair

This grille housing assembly replaces the front grille frame to restore appearance and proper airflow around the appliance. The Almond creme finish matches cabinets and trim for a factory-fit look. What it does:

• Replaces a cracked, warped, or discolored front grille housing
• Restores correct airflow and alignment of the lower/front access area
• Helps prevent debris from entering internal components behind the grille
• Returns the appliance to a uniform Almond creme exterior appearance

• One grille housing assembly in Almond creme finish

• Install requires removing the lower access/grille area; keep panels and fasteners organized
• Handle the replacement part gently to avoid scratching the finish
• Disconnect power to the appliance before beginning work to avoid injury

This motor housing is the molded support that secures and protects the washer motor assembly, helping keep the motor aligned and stable for reliable agitation and spin performance. Designed to match the original color and fit. What it does:

• Holds and positions the washer motor to maintain proper alignment
• Protects the motor from debris and contact with other components
• Reduces vibration transfer between the motor and cabinet
• Can cause noise, wobble, or motor misalignment when cracked or damaged

• Disconnect power to the appliance before starting any repair
• Keep track of mounting hardware and wiring locations for correct reassembly
• Inspect related mounts and fasteners; replace if worn or damaged

This gearcase housing is the molded enclosure that supports and protects the motor drive gears, keeping them aligned for reliable rotation. It restores proper gear engagement and prevents debris from entering the drive area. What it does:

• Houses and positions the motor drive gears so the drive system turns smoothly
• Protects internal gears from lint, dust, and moisture that can cause wear or jamming
• Helps maintain correct gear alignment to reduce noise, grinding, or slipping during operation
• Supports the motor/gear assembly for consistent power transfer to the drivetrain

• Install with original fasteners and proper torque to maintain alignment
• Inspect gears, seals, and nearby components; replace any worn parts while housing is accessible
• Disconnect power and follow manufacturer safety procedures before attempting service

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment

This motor housing is the outer mounting component that secures and protects the appliance motor, helping keep the motor aligned and reducing vibration for quieter operation. Choose the correct color/finish variant for your unit. What it does:

• Provides a stable mounting point for the motor to prevent misalignment and excessive movement
• Protects the motor from debris and contact with adjacent parts
• Helps reduce motor vibration and related noise during operation
• Used to restore proper motor positioning when worn, cracked, or bent housing causes rubbing or abnormal sounds

• One motor housing (color/finish depends on selected variant)

• Disconnect power before beginning service; follow all safety warnings for your appliance
• Basic disassembly (cabinet/drum removal) is typically required to access and replace the housing
• Inspect mounting hardware and gaskets; replace any damaged fasteners or seals as needed
• If symptoms persist after replacement (noise, rubbing, excessive vibration), check motor mounts, blower, and alignment

This band trim is a cosmetic finishing piece that covers and protects the visible edge of the appliance door or cabinet for a clean, factory look. It refreshes appearance and helps keep dirt and moisture out of the seam. What it does:

• Covers and finishes the exposed edge of a door or cabinet for a uniform appearance
• Helps reduce dirt and grime buildup along the seam between panels
• Restores a worn, scratched, or missing trim to improve overall appliance appearance
• Works with existing door/cabinet mounting points to sit flush with surrounding surfaces

• Disconnect power to the appliance before starting repairs and work on a cool, dry surface
• Remove any clips or fasteners holding the old trim; save reusable hardware
• Align the new trim with the edge and press or secure into place using the original mounting points
• Replace them with OEM-specified hardware

This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:

• Covers and protects the exposed end of the component housing to help prevent dust and debris entry
• Helps keep wiring and terminals shielded from accidental contact
• Restores the original appearance where the original cover was cracked, discolored, or missing
• Matches the OEM color scheme for a factory look

• Designed to snap or screw into the component housing—verify orientation before seating
• Use basic hand tools; avoid prying on tabs to prevent breakage
• Disconnect power to the appliance before attempting removal or installation
• If tabs or mounting points are damaged, replace associated housing parts as needed

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

Color: Onyx black

This end cover is a replacement console end cap that restores the finished appearance of a laundry appliance and protects underlying components from dust and damage. It matches white/caviar trim and provides a clean, factory look. What it does:

• Covers and protects the exposed end of the console or control housing
• Helps prevent dust, debris and accidental contact with internal wiring or switches
• Restores a worn, cracked or missing cosmetic trim piece for a finished appearance
• Fits the specific OEM mounting points for secure attachment

• One end cover (white/caviar)

• Turn off and unplug the appliance before starting any repair
• Removal typically requires removing a few screws or disengaging snap tabs; keep fasteners for reinstallation
• Align tabs and secure the cover to the console; do not force parts to avoid breakage

A replacement trim panel that restores the appliance's exterior finish and protects internal components from dust and debris. Helps maintain a clean look and keeps internal parts shielded after repair. What it does

• Acts as the exterior trim/cover over the appliance opening, preventing debris and lint from entering internal areas
• Protects switches, controls and internal wiring from accidental contact and damage
• Restores proper fit and finish when the original cover is cracked, warped or missing
• Stops rattling or gaps caused by a broken or loose cover

• Only install with power disconnected to avoid electrical shock
• Requires removal of adjacent panels or fasteners for access; use appropriate hand tools
• Handle carefully to avoid scratching the finish; align tabs and fasteners before tightening
• If fasteners or clips are damaged, replace them to ensure secure fit

This cobalt blue replacement cover restores the appliance's exterior look and protects internal components from dirt and wear. It fits where the original colored trim or panel cover has become cracked, faded, or missing. What it does:

• Replaces a damaged or worn cobalt blue cover to renew appearance and finish
• Shields underlying components from dust and debris
• Helps prevent small items from entering openings behind the cover
• Commonly used when the original cover is cracked, chipped, faded, or broken

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Installation typically requires only basic hand tools; follow the appliance's service instructions.
• Handle edges carefully — clips or tabs can be sharp or brittle on older parts.
• Only install a part that matches the appliance's original location and attachment points; do not force or modify the part.

This cover is a replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and controls shielded while maintaining a clean, finished look. What it does:

• Shields control components and wiring from dust, spills, and accidental contact
• Restores damaged or missing exterior panels for a finished appearance
• Helps maintain proper airflow and component clearance by covering openings
• Can reduce rattles or vibration by replacing a loose or broken panel

• One replacement cover

• Disconnect power (and gas or water if applicable) before starting any repair
• Basic hand tools are typically required; follow the appliance's service manual for specific steps
• Handle edges carefully; align tabs/fasteners before securing to avoid damage
• Replace worn fasteners or clips to ensure a secure fit

A factory-matched Almond crème touch-up paint bottle to restore small chips, scratches, and worn spots on Almond-finish appliances. Helps blend blemishes into surrounding finish for a cleaner, more consistent look. What it does:

• Provides color-matched coverage for small surface chips and scratches on Almond-finish appliances
• Restores appearance without replacing large panels or trim
• Helps hide everyday wear and minor cosmetic damage
• Dries to a durable finish that blends with factory color

• One (1) bottle of Almond crème touch-up paint

• Shake well before use and test on an inconspicuous area first
• Clean and dry the surface thoroughly; remove loose paint and grease
• Apply sparingly in thin coats, allowing recommended drying time between coats
• Use in a well-ventilated area and follow all safety label instructions; wear gloves and eye protection

Color: White

This replacement planetary assembly restores proper drive alignment and support for rotating components in select laundry appliances, helping reduce noise and vibration while returning smooth drum rotation. What it does:

• Transmits rotational force between the drive system and rotating drum components
• Supports alignment of the rotating assembly to prevent wobble or irregular movement
• Helps eliminate grinding, clunking or unusual noises caused by worn planetary components
• Resolve intermittent or complete loss of rotation when the planetary is worn or damaged

• Disconnect power and follow lock-out/tag-out before starting any repair
• Basic hand tools are typically required; refer to the appliance service manual for exact procedure
• Inspect adjacent parts (gears, bearings, seals) and replace if damaged

This planetary gear assembly drives the washer's agitator/spin mechanism to transfer motor motion into drum movement, restoring smooth agitation and spin action. Designed to fit as the washer's internal gearing component for reliable operation. What it does:

• Converts motor rotation into the agitator/drum motion for effective washing and spinning
• Replaces worn or damaged gears that can cause noisy operation or grinding sounds
• Helps correct slow, intermittent, or no-agitation and no-spin symptoms when gearbox failure is present
• Works as the internal gearset that mates with the transmission/agitator components

• One planetary gear assembly

• Disconnect power and water before beginning any repair
• Requires partial disassembly of the washer cabinet and access to the transmission/agitator area
• Inspect related parts (agitator, drive coupling, transmission) for wear and replace as needed

Color: Almond creme

This planetary gear assembly transfers motor motion to the appliance's drive mechanism, restoring smooth rotation and normal operation. It replaces a worn or damaged planetary component to reduce noise and restore consistent drive performance. What it does:

• Transfers motor torque through the gear train to the driven component for proper operation
• Replaces worn or damaged gears that can cause grinding, clunking, or loss of drive
• Helps stop intermittent or failed agitation/spin caused by stripped or broken gear teeth
• Restores correct gear engagement to reduce excessive noise during operation

• One planetary gear assembly

• Disconnect power and water before starting any repair
• Some disassembly of the gearcase or transmission may be required; follow the OEM service manual
• Inspect surrounding seals, bearings, and fasteners; replace any damaged components
• Use proper tools and torque values

Color: White

This grille control surface assembly provides the finished front trim for the appliance control area and restores a clean, secure fit and appearance. It replaces a cracked, damaged or loose control-area grille to improve panel alignment and aesthetics. What it does

• Covers and protects the appliance control area while providing the finished exterior appearance
• Restores proper fit and alignment when the original grille is cracked, bent, or broken
• Helps keep moisture and debris away from underlying controls and wiring
• Matches Onyx black finish for a consistent look with the rest of the appliance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools (screwdriver, possibly trim tool) are typically required for removal and reattachment
• Align tabs and screw holes carefully to avoid cracking the trim during installation
• Replace damaged internal fasteners or mounting clips to ensure a secure fit

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This Almond Creme color finish panel restores the original look of your appliance where the finish is worn, scratched, or mismatched. It provides a factory-style color match to keep the exterior appearance consistent. What it does:

• Replaces damaged or discolored finish panels to restore appliance appearance
• Covers scratches, chips, and worn paint on the affected area
• Matches the Almond Creme factory color to maintain a cohesive look
• Helps maintain resale value and overall visual condition

• Disconnect power to the appliance before beginning any work
• Handle panel carefully to avoid scratching the finish during installation
• Align tabs and mounting points, then secure with existing fasteners as required

This pedestal feet assembly provides the lower support and leveling for a laundry pedestal, helping keep the pedestal stable and aligned beneath the washer or dryer. Designed to restore proper support and reduce rocking. What it does:

• Replaces damaged or worn pedestal feet that cause rocking, uneven height, or instability
• Provides adjustable support to help level the pedestal on uneven floors
• Protects floors by maintaining proper pedestal alignment and preventing scraping
• Restores safe, secure support for appliances installed on the pedestal

• Follow the appliance and pedestal manufacturer instructions; have a second person or proper support to prevent tip-over when removing or installing the pedestal
• Ensure the appliance is powered off and disconnected from utilities if appliance removal or repositioning is required
• Use basic hand tools; confirm all fasteners are tightened securely after installation

This pedestle is the replacement agitator post that supports and centers the washer agitator, restoring proper agitation and load stability for top-load washers. It's a direct-fit part used during agitator assembly repairs. What it does:

• Centers and secures the agitator on the transmission shaft for effective wash action
• Helps transmit agitation motion from the transmission to the agitator
• Commonly replaced when the agitator wobbles, slips, or does not rotate properly
• Restores stable operation without requiring a full agitator or transmission replacement

• One pedestle (agitator post) as shown

• Disconnect power to the washer before beginning any repair
• Remove agitator per manufacturer instructions to access and replace the pedestle
• Use appropriate hand tools; keep fasteners organized for reassembly