Parts for Kitchenaid KSM7581CA0: 01 - Color Variation Parts

This upper housing is the molded top enclosure that supports and protects the washer's control and dispenser area, restoring proper alignment and a finished appearance. It helps keep internal components secure and resists water intrusion around the machine top. What it does:

• Replaces a cracked, warped or damaged upper housing that lets moisture or debris reach internal controls.
• Restores proper fit and alignment for the control panel and dispenser components.
• Reduces vibration-related noise from loose or misaligned top components.
• Helps protect electrical and user-interface parts from spills and splashes.

• Upper housing (1)

• Disconnect power and water supply before beginning any repair.
• Handle the housing carefully to avoid scratching painted surfaces; use trim clips or fasteners specified by the manufacturer.
• Verify matching part number and fit before installation; some models require removal of the control panel or console to access mounting fasteners.

This motor housing is the outer mounting and protective enclosure for the appliance motor, finished in white to match the cabinet. It provides a secure support for the motor and helps isolate noise and vibration. What it does:

• Supports and secures the motor assembly in the appliance
• Protects the motor from debris and contact with moving components
• Helps reduce motor noise and vibration through stable mounting
• Resolves symptoms like excessive vibration, rubbing noises, or misaligned motor mounting

• One motor housing (white)

• Disconnect power to the appliance before starting any repair
• Typical installation requires removing panels and either the drum or motor access components; follow OEM instructions
• Handle housing edges carefully and retain all mounting hardware for reassembly

This lower gearcase housing replaces the worn or damaged gearbox housing on compatible top-load washers to restore proper drivetrain support and reduce leaks or noise. It provides a direct-fit structural mounting point for the washer's internal gear components. What it does:

• Houses and protects the washer's gear assembly and associated seals
• Supports the transmission/gearcase and aligns drive components
• Prevents fluid intrusion into the gear area when properly installed
• Helps stop grinding, clunking, or leaking related to a cracked or broken housing

• Disconnect power and water before starting any repair
• Inspect adjacent seals, gaskets, and fasteners; replace if worn
• Follow the OEM service manual for torque specs, alignment, and reassembly

This planetary assembly transfers motor rotation through the gear train to drive the appliance's drum or agitator, restoring proper mechanical drive for normal operation. It replaces worn or damaged drive gears to help stop slipping and noise. What it does:

• Transfers motor torque through the planetary gears to the drum/agitator drive
• Replaces worn, stripped, or broken gears that cause slipping or loss of drive
• Stops grinding, clunking, or unusual drive noise associated with damaged gear parts
• Restores consistent rotation and load handling when the rest of the drivetrain is sound

• One planetary assembly

• Disconnect power and water (if applicable) before beginning service
• Inspect surrounding gearbox, seals, and fasteners; replace any damaged components
• Use basic hand tools; support the drum/agitator during removal to avoid binding

This planetary assembly is the drive gear housing that transfers motor torque into the appliance's rotating mechanism, restoring reliable movement and consistent operation. It's a direct-fit replacement when the original gear housing is worn or damaged. What it does:

• Translates motor rotation into the multi-gear motion needed for the appliance's rotating parts
• Restores smooth, quiet operation when worn or failing gears cause grinding or irregular movement
• Prevents further damage to surrounding components by replacing stripped or broken gear teeth
• Supports consistent performance under normal operating loads

• Disconnect power and follow all safety procedures before servicing
• Access may require removing the appliance cabinet or specific panels; keep fasteners organized
• Inspect related seals, bearings, and mounting hardware and replace if damaged

This planetary assembly is the lower gear hub that spins and orbits the beater/attachments to create full-coverage mixing. Replacing a worn or damaged planetary restores smooth, consistent rotation and helps reduce wobble and grinding noises during operation. What it does:

• Transfers motor power to the beater with true planetary motion for thorough mixing
• Supports and aligns the beater/attachment shaft
• Helps correct issues like a beater that won't turn or stalls under load
• Can reduce unusual grinding or clunking sounds and visible wobble/play at the beater hub

• One planetary assembly

• Disconnect power and remove the bowl and beater before starting
• Remove the drip ring/trim and drive out the retaining pin to release the old planetary; note orientation
• Seat and align the new assembly fully, reinstall the retaining pin and trim, then test on low speed
• If the gearcase is opened during service, use only food-grade grease per manufacturer guidance

A white replacement bowl support that centers and stabilizes the appliance bowl or glass tray to reduce wobble and noise, helping restore smooth rotation and reliable operation. What it does:

• Centers and supports the bowl or glass tray to prevent off-center rotation and rubbing.
• Keeps the tray steady to reduce vibration and noisy operation.
• Helps the tray rotate smoothly for even heating or proper function.
• Common symptoms it can address: wobbling or off-center bowl/tray, noisy rotation, scraping or unstable tray movement.

• Disconnect power to the appliance before starting any work.
• Remove the bowl or glass tray and lift out the old support; inspect the drive hub or shaft for damage.
• Align the support over the hub/shaft and press into place until fully seated; do not force broken or warped plastic.

This bowl and foot assembly replaces a cracked or worn support bowl used to stabilize and support the appliance's internal component, restoring proper alignment and quiet operation. Durable molded construction suits direct-replacement needs. What it does:

• Supports and centers internal components to maintain smooth rotation and balance
• Replaces damaged, cracked, or warped bowl/foot that can cause rattling or uneven operation
• Restores correct spacing to prevent contact between moving parts and the cabinet
• Matches factory fit and finish for a secure, stable installation

• Disconnect power before beginning any repair to avoid electrical hazard
• Handle with care to avoid cracking the plastic; use gentle force when seating into place
• Basic hand tools may be needed to access the mounting area; model-specific diagram for access