Parts for Kitchenaid KSM150-1: 01 - Color Variation Parts

This Crystal blue lens is a decorative replacement trim piece that restores the original look of your appliance and keeps controls or indicators covered and visible. It provides a clean, finished appearance where the colored lens is used. What it does:

• Replaces a cracked, faded, or missing crystal blue lens or decorative trim
• Restores visibility of underlying controls or indicator lights while protecting them from dust
• Helps return the appliance's original aesthetic and color-matched finish
• Useful when chipped edges or discoloration reduce the unit's appearance

• One Crystal blue lens/trim piece as pictured

• High-level replacement: remove the old lens/trim and snap or secure this piece into place; exact fasteners vary by model
• Power off and disconnect the appliance if removal requires accessing internal components
• Avoid excessive force to prevent cracking; use a soft tool to pry where applicable
• If mounting hardware is missing or damaged, confirm correct fasteners before installation

This replacement gear housing secures and encloses the drive gears that transfer motor motion to the washer's agitator/drive assembly, restoring proper mechanical drive function and reducing noise from worn or damaged housings. What it does:

• Houses and supports the drive gears that transfer motor rotation to the agitator/drive mechanism
• Prevents gear misalignment and keeps lubricant contained for smooth operation
• Commonly used when the washer makes grinding, grinding-like, or unusually noisy operation
• Can resolve symptoms like lack of agitation or intermittent drive engagement caused by a broken or cracked housing

• Disconnect power (and water if applicable) before beginning any repair
• Remove access panels and drive components per service manual to access the housing
• Inspect gears, seals, and fasteners; replace any damaged components before reassembly
• Test the appliance on a short cycle after installation to confirm proper operation

Motor housing for stand mixers. Covers and protects the internal motor assembly. Replace if cracked, damaged, or broken to restore appearance.

Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.

Fix excessive vibration or unusual motor noise with this stand mixer motor housing. Secures and aligns the motor for stable, quiet operation.

Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.

Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.

This is the main outer housing for a stand mixer, finished in black. It encloses and protects the motor and internal gearing of the mixer. Replace the housing if it is cracked, chipped, or broken, which can expose internal components to damage or create a safety hazard during operation.

If your stand mixer runs loud or vibrates excessively, a cracked motor housing may be the cause. This housing secures and protects the motor assembly.

Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment

This is a black plastic motor housing that encloses and protects the dishwasher's motor assembly. It provides structural support and shields the motor from debris and moisture during operation. Replace this housing if it is cracked, warped, or damaged, which can cause motor vibration, unusual noise, or water leaks near the motor area.

White trim band for stand mixers. Replaces cracked, chipped, or discolored decorative trim ring. Fits around the motor housing for a clean finish.

Decorative trim band for stand mixers. Installs around the motor housing base. Replace if cracked, chipped, discolored, or missing for a clean look.

Cosmetic band trim that covers the edge of your stand mixer body for a clean finish. Replace if cracked, chipped, discolored, or missing.

Cosmetic band trim that covers the edge of your stand mixer body for a clean finish. Replace if cracked, chipped, discolored, or missing.

This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:

• Covers and protects the exposed end of the component housing to help prevent dust and debris entry
• Helps keep wiring and terminals shielded from accidental contact
• Restores the original appearance where the original cover was cracked, discolored, or missing
• Matches the OEM color scheme for a factory look

• Designed to snap or screw into the component housing—verify orientation before seating
• Use basic hand tools; avoid prying on tabs to prevent breakage
• Disconnect power to the appliance before attempting removal or installation
• If tabs or mounting points are damaged, replace associated housing parts as needed

This is a small lemon-scented fragrance sachet designed to refresh appliance interiors and help reduce unpleasant odors. It provides a mild, pleasant scent to keep the compartment smelling clean between deep cleans. What it does

• Releases a light lemon fragrance to mask and neutralize common fridge/washer/dryer odors
• Helps maintain a fresher-smelling appliance between cleanings
• Safe for use in enclosed appliance compartments when placed where it won't contact food or laundry
• Can assist with user-perceived freshness after door openings

• One lemon-scented fragrance sachet

• Place sachet on a shelf or in a drawer where it will not touch food, clothing, or heating elements
• Replace according to scent strength or manufacturer guidance; discard if damaged
• Keep out of reach of children and pets; not for ingestion
• If you have concerns about using fragrances near sensitive individuals, do not use

This is a decorative end cap cover designed to fit on the exterior trim or handle area of the dishwasher. It provides a finished appearance and protects the underlying hardware. Replace if the cover is cracked, discolored, or missing. This part is in the Martha Green color.

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

This is a Glacier Blue finish piece used to match or replace the colored trim on compatible appliance panels, restoring appearance and consistent styling. What it does

• Provides a color-matched exterior finish or trim for the appliance front
• Restores cosmetic appearance if original trim is scratched, faded, or damaged
• Helps maintain a uniform look with other Glacier Blue components
• Designed to fit the specific mounting locations listed by the manufacturer

• One Glacier Blue finish/trim piece as shown

• Install requires basic hand tools; remove power or follow manufacturer safety guidance for panels with electrical components
• Handle carefully to avoid scratching the finished surface
• Confirm correct part number and panel location before installation

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

This is an end cover that attaches to the outer edge of the dishwasher door or kick plate to provide a finished appearance. It snaps or slides into place to conceal exposed edges and internal components. Replace this cover if it is cracked, discolored, or missing, which can leave the dishwasher looking unfinished.

White console end cap for stand mixers. Covers the exposed end of the motor housing for a finished look. Replace if cracked, broken, or missing.

Replacement cover for stand mixer housing. Protects internal components and provides finished appearance. Needed when original is cracked or broken.

This is a decorative end cover that attaches to the body of a stand mixer. It conceals internal components and provides a finished appearance to the mixer housing. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.

This is a small protective end cover that attaches to the exterior of the dishwasher, concealing internal components and providing a finished appearance. It helps shield the covered area from moisture and debris. Replace this cover if it is cracked, broken, missing, or no longer snaps securely into place.

Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.

This is a cover designed for the coin box assembly on a commercial-style dishwasher or laundry appliance. It protects the coin mechanism from tampering and debris. Replace this cover if it is cracked, broken, or missing, which can leave the coin mechanism exposed and vulnerable to damage.

White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.

This is the planetary gear assembly used in the dishwasher's wash system. It drives the rotation of the spray arms to ensure even water distribution during wash and rinse cycles. Replace this assembly if the spray arms are not rotating properly, dishes are coming out dirty, or you notice grinding noises during operation.

If your stand mixer makes grinding noises or the beater doesn't rotate properly, the planetary gear assembly may need replacement. Moderate DIY repair.

This is the planetary gear assembly for a stand mixer, which drives the rotating motion of the mixer attachments in an orbital path around the inside of the bowl. It connects the motor's output to the attachment hub, ensuring thorough and even mixing. Replace this part if the mixer head wobbles excessively, attachments spin erratically, or the mixing action becomes uneven or stops altogether.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.

Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.

This planetary gear assembly is a key component in the dishwasher's spray arm drive system, converting motor rotation into the oscillating motion needed to distribute water throughout the wash tub. It consists of a set of gears housed in a compact assembly that meshes with the motor output. Replace this part if the spray arms are not rotating properly, dishes are coming out dirty, or you hear grinding noises during the wash cycle.

Color: White

This is the lower gear case assembly for a stand mixer, housing the internal gears that transfer motor power to the mixing attachments. It serves as the main drivetrain enclosure and structural base of the mixer head. Replace this gear case if you notice grinding noises, the mixer fails to turn attachments, or the housing is cracked or leaking lubricant.

Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.

Replaces the cracked, broken, or worn lower casing on tilt-head stand mixers. Restores cosmetic finish and structural support for proper operation.

This is the lower gearcase housing for a stand mixer, finished in empire red. It encloses the gears and internal drive components that transfer motor power to the mixing attachments. Replace this gearcase if it is cracked, leaking lubricant, or if the housing is damaged and no longer properly supporting the internal gear assembly.

This is the lower gear case housing that encloses the internal gears and drivetrain of a stand mixer. It protects the gears from debris and helps maintain proper alignment for smooth power transfer to the mixing attachments. Replace this gear case if it is cracked, leaking lubricant, or if the mixer produces grinding noises indicating internal gear misalignment.

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This is the gearcase that houses the internal gears responsible for transferring motor power to the mixing attachments in a stand mixer. It contains the gear train that controls speed and torque output. Replace this gearcase if you hear grinding noises, the mixer struggles under load, gears are visibly worn or stripped, or if lubricant is leaking from the housing.

This is the gearcase (gearbox) housing for a stand mixer, which contains and supports the internal gears that transfer motor power to the mixing attachments. It serves as the structural enclosure for the gear train assembly. Replace this part if the gearcase is cracked, leaking lubricant, or if the gears are no longer properly supported, causing unusual noises or wobbling during operation.

This Imperial Black finish touch-up restores the appliance's exterior color for a cleaner, uniform look and helps hide minor scratches or chips. Ideal for spot repairs to maintain the appliance's appearance. What it does:

• Applies matching Imperial Black color to small scratches, chips and scuffs
• Helps blend repaired areas with surrounding finish for a consistent look
• Protects exposed surfaces from minor corrosion after paint is removed
• Useful for cosmetic touch-ups without full panel replacement

• Clean and dry the repair area before applying; follow package prep instructions
• Test on an inconspicuous area first to confirm color match
• Apply in thin layers and allow full drying between coats for best results
• Keep out of reach of children; follow all safety and ventilation guidance on the product label

Replacement pedestal base for stand mixers. Supports and stabilizes the mixer body. Order a new pedestal if yours is cracked, damaged, or discolored.

This pedestal feet assembly provides the lower support and leveling for a laundry pedestal, helping keep the pedestal stable and aligned beneath the washer or dryer. Designed to restore proper support and reduce rocking. What it does:

• Replaces damaged or worn pedestal feet that cause rocking, uneven height, or instability
• Provides adjustable support to help level the pedestal on uneven floors
• Protects floors by maintaining proper pedestal alignment and preventing scraping
• Restores safe, secure support for appliances installed on the pedestal

• Follow the appliance and pedestal manufacturer instructions; have a second person or proper support to prevent tip-over when removing or installing the pedestal
• Ensure the appliance is powered off and disconnected from utilities if appliance removal or repositioning is required
• Use basic hand tools; confirm all fasteners are tightened securely after installation

This pedestle is the replacement agitator post that supports and centers the washer agitator, restoring proper agitation and load stability for top-load washers. It's a direct-fit part used during agitator assembly repairs. What it does:

• Centers and secures the agitator on the transmission shaft for effective wash action
• Helps transmit agitation motion from the transmission to the agitator
• Commonly replaced when the agitator wobbles, slips, or does not rotate properly
• Restores stable operation without requiring a full agitator or transmission replacement

• One pedestle (agitator post) as shown

• Disconnect power to the washer before beginning any repair
• Remove agitator per manufacturer instructions to access and replace the pedestle
• Use appropriate hand tools; keep fasteners organized for reassembly

This is a base pedestal panel that mounts to the bottom of the dishwasher frame. It provides structural support and a finished appearance to the lower portion of the unit. Replace this part if it is cracked, warped, or missing, which can cause instability or an unsightly gap beneath the dishwasher.

White pedestal base for stand mixers. Replaces cracked, chipped, or damaged pedestals that affect stability and appearance. Restores base support.