Need Help?
Call
Show parts
Usually ships within 4 - 14 days
This Crystal blue lens is a decorative replacement trim piece that restores the original look of your appliance and keeps controls or indicators covered and visible. It provides a clean, finished appearance where the colored lens is used. What it does:
This replacement gear housing secures and encloses the drive gears that transfer motor motion to the washer's agitator/drive assembly, restoring proper mechanical drive function and reducing noise from worn or damaged housings. What it does:
This part is discontinued by the manufacturer and is no longer available for purchase.
Motor housing for stand mixers. Covers and protects the internal motor assembly. Replace if cracked, damaged, or broken to restore appearance.
This replacement housing provides the structural enclosure for the associated appliance components, keeping them supported and protected so the unit operates safely and reliably. What it does:
Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.
Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.
Fix excessive vibration or unusual motor noise with this stand mixer motor housing. Secures and aligns the motor for stable, quiet operation.
Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.
This is the main outer housing for a stand mixer, finished in black. It encloses and protects the motor and internal gearing of the mixer. Replace the housing if it is cracked, chipped, or broken, which can expose internal components to damage or create a safety hazard during operation.
Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.
If your stand mixer runs loud or vibrates excessively, a cracked motor housing may be the cause. This housing secures and protects the motor assembly.
This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does
This is a black plastic motor housing that encloses and protects the dishwasher's motor assembly. It provides structural support and shields the motor from debris and moisture during operation. Replace this housing if it is cracked, warped, or damaged, which can cause motor vibration, unusual noise, or water leaks near the motor area.
White trim band for stand mixers. Replaces cracked, chipped, or discolored decorative trim ring. Fits around the motor housing for a clean finish.
Decorative trim band for stand mixers. Installs around the motor housing base. Replace if cracked, chipped, discolored, or missing for a clean look.
This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:
This is a small lemon-scented fragrance sachet designed to refresh appliance interiors and help reduce unpleasant odors. It provides a mild, pleasant scent to keep the compartment smelling clean between deep cleans. What it does
This is a decorative end cap cover designed to fit on the exterior trim or handle area of the dishwasher. It provides a finished appearance and protects the underlying hardware. Replace if the cover is cracked, discolored, or missing. This part is in the Martha Green color.
This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:
This is a Glacier Blue finish piece used to match or replace the colored trim on compatible appliance panels, restoring appearance and consistent styling. What it does
This replacement cover protects internal components and restores the appliance's exterior appearance. It keeps wires and parts sheltered from dust and debris while providing a finished surface for the area it attaches to. What it does:
This replacement cover restores the appliance's exterior finish and protects internal components from dust and damage. It helps maintain safe operation and a factory appearance after damage or wear. What it does:
Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.
This is an end cover that attaches to the outer edge of the dishwasher door or kick plate to provide a finished appearance. It snaps or slides into place to conceal exposed edges and internal components. Replace this cover if it is cracked, discolored, or missing, which can leave the dishwasher looking unfinished.
Replacement cover for stand mixer housing. Protects internal components and provides finished appearance. Needed when original is cracked or broken.
This is a decorative end cover that attaches to the body of a stand mixer. It conceals internal components and provides a finished appearance to the mixer housing. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.
White console end cap for stand mixers. Covers the exposed end of the motor housing for a finished look. Replace if cracked, broken, or missing.
This is a small protective end cover that attaches to the exterior of the dishwasher, concealing internal components and providing a finished appearance. It helps shield the covered area from moisture and debris. Replace this cover if it is cracked, broken, missing, or no longer snaps securely into place.
Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.
This is a cover designed for the coin box assembly on a commercial-style dishwasher or laundry appliance. It protects the coin mechanism from tampering and debris. Replace this cover if it is cracked, broken, or missing, which can leave the coin mechanism exposed and vulnerable to damage.
White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.
Mixer not spinning or making grinding noises? This planetary gear assembly drives the beater rotation. Moderate DIY repair in about 45 minutes.
This is the planetary gear assembly used in the dishwasher's wash system. It drives the rotation of the spray arms to ensure even water distribution during wash and rinse cycles. Replace this assembly if the spray arms are not rotating properly, dishes are coming out dirty, or you notice grinding noises during operation.
This is the planetary gear assembly for a stand mixer, which drives the rotating motion of the mixer attachments in an orbital path around the inside of the bowl. It connects the motor's output to the attachment hub, ensuring thorough and even mixing. Replace this part if the mixer head wobbles excessively, attachments spin erratically, or the mixing action becomes uneven or stops altogether.
If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.
Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.
Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.
This planetary gear assembly is a key component in the dishwasher's spray arm drive system, converting motor rotation into the oscillating motion needed to distribute water throughout the wash tub. It consists of a set of gears housed in a compact assembly that meshes with the motor output. Replace this part if the spray arms are not rotating properly, dishes are coming out dirty, or you hear grinding noises during the wash cycle.
Color: White
This is the lower gear case assembly for a stand mixer, housing the internal gears that transfer motor power to the mixing attachments. It serves as the main drivetrain enclosure and structural base of the mixer head. Replace this gear case if you notice grinding noises, the mixer fails to turn attachments, or the housing is cracked or leaking lubricant.
Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.
Fix a stand mixer that's making grinding noises or won't mix properly with this gearcase assembly. Common repair for worn internal gears.
Mixer not turning or making grinding noises? This gearcase assembly houses the planetary gears that drive your attachments. Moderate DIY repair.
Replaces the cracked, broken, or worn lower casing on tilt-head stand mixers. Restores cosmetic finish and structural support for proper operation.
This is the lower gearcase housing for a stand mixer, finished in empire red. It encloses the gears and internal drive components that transfer motor power to the mixing attachments. Replace this gearcase if it is cracked, leaking lubricant, or if the housing is damaged and no longer properly supporting the internal gear assembly.
This is the lower gear case housing that encloses the internal gears and drivetrain of a stand mixer. It protects the gears from debris and helps maintain proper alignment for smooth power transfer to the mixing attachments. Replace this gear case if it is cracked, leaking lubricant, or if the mixer produces grinding noises indicating internal gear misalignment.
This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does
This is the gearcase that houses the internal gears responsible for transferring motor power to the mixing attachments in a stand mixer. It contains the gear train that controls speed and torque output. Replace this gearcase if you hear grinding noises, the mixer struggles under load, gears are visibly worn or stripped, or if lubricant is leaking from the housing.
This is the gearcase (gearbox) housing for a stand mixer, which contains and supports the internal gears that transfer motor power to the mixing attachments. It serves as the structural enclosure for the gear train assembly. Replace this part if the gearcase is cracked, leaking lubricant, or if the gears are no longer properly supported, causing unusual noises or wobbling during operation.
This Imperial Black finish touch-up restores the appliance's exterior color for a cleaner, uniform look and helps hide minor scratches or chips. Ideal for spot repairs to maintain the appliance's appearance. What it does:
Replacement pedestal base for stand mixers. Supports and stabilizes the mixer body. Order a new pedestal if yours is cracked, damaged, or discolored.
This pedestal raises a front-load washer or dryer to a more comfortable working height while providing a built-in storage drawer for laundry essentials. It helps reduce bending and creates convenient under-appliance storage. What it does:
This is a silver metallic pedestal base panel designed to mount beneath a laundry appliance or stand mixer, providing elevated positioning and a finished appearance. It serves as a structural and cosmetic foundation piece. Replace this panel if it is dented, cracked, rusted, or if the finish has deteriorated.
Pedestal and feet assembly for stand mixers. Raises and stabilizes the mixer base. Replace if cracked, broken, or worn to restore proper alignment.
This pedestal elevates a front-load laundry appliance and adds a built-in storage drawer to keep detergent and supplies within easy reach, improving ergonomics and convenience during use. What it does:
This is a base pedestal panel that mounts to the bottom of the dishwasher frame. It provides structural support and a finished appearance to the lower portion of the unit. Replace this part if it is cracked, warped, or missing, which can cause instability or an unsightly gap beneath the dishwasher.
White pedestal base for stand mixers. Replaces cracked, chipped, or damaged pedestals that affect stability and appearance. Restores base support.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.