Parts for Kitchenaid KSM150PSGR1: 01 - Color Variation Parts

Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.

Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.

Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.

This is a black plastic motor housing that encloses and protects the dishwasher's motor assembly. It provides structural support and shields the motor from debris and moisture during operation. Replace this housing if it is cracked, warped, or damaged, which can cause motor vibration, unusual noise, or water leaks near the motor area.

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment

Decorative trim band for stand mixers. Installs around the motor housing base. Replace if cracked, chipped, discolored, or missing for a clean look.

This is an end cover that attaches to the outer edge of the dishwasher door or kick plate to provide a finished appearance. It snaps or slides into place to conceal exposed edges and internal components. Replace this cover if it is cracked, discolored, or missing, which can leave the dishwasher looking unfinished.

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

This is a decorative end cover that attaches to the body of a stand mixer. It conceals internal components and provides a finished appearance to the mixer housing. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.

This is a small protective end cover that attaches to the exterior of the dishwasher, concealing internal components and providing a finished appearance. It helps shield the covered area from moisture and debris. Replace this cover if it is cracked, broken, missing, or no longer snaps securely into place.

Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.

This is a cover designed for the coin box assembly on a commercial-style dishwasher or laundry appliance. It protects the coin mechanism from tampering and debris. Replace this cover if it is cracked, broken, or missing, which can leave the coin mechanism exposed and vulnerable to damage.

This is the planetary gear assembly used in the dishwasher's wash system. It drives the rotation of the spray arms to ensure even water distribution during wash and rinse cycles. Replace this assembly if the spray arms are not rotating properly, dishes are coming out dirty, or you notice grinding noises during operation.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.

Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.

This planetary gear assembly is a key component in the dishwasher's spray arm drive system, converting motor rotation into the oscillating motion needed to distribute water throughout the wash tub. It consists of a set of gears housed in a compact assembly that meshes with the motor output. Replace this part if the spray arms are not rotating properly, dishes are coming out dirty, or you hear grinding noises during the wash cycle.

Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.

This is the lower gear case housing that encloses the internal gears and drivetrain of a stand mixer. It protects the gears from debris and helps maintain proper alignment for smooth power transfer to the mixing attachments. Replace this gear case if it is cracked, leaking lubricant, or if the mixer produces grinding noises indicating internal gear misalignment.

This is the lower gearcase housing for a stand mixer, finished in empire red. It encloses the gears and internal drive components that transfer motor power to the mixing attachments. Replace this gearcase if it is cracked, leaking lubricant, or if the housing is damaged and no longer properly supporting the internal gear assembly.

This is the gearcase that houses the internal gears responsible for transferring motor power to the mixing attachments in a stand mixer. It contains the gear train that controls speed and torque output. Replace this gearcase if you hear grinding noises, the mixer struggles under load, gears are visibly worn or stripped, or if lubricant is leaking from the housing.

This is the gearcase (gearbox) housing for a stand mixer, which contains and supports the internal gears that transfer motor power to the mixing attachments. It serves as the structural enclosure for the gear train assembly. Replace this part if the gearcase is cracked, leaking lubricant, or if the gears are no longer properly supported, causing unusual noises or wobbling during operation.

This pedestal raises the appliance to a more comfortable height while providing a stable base and integrated storage space. It improves accessibility and makes loading and unloading easier by reducing bending. What it does:

• Supports and elevates the appliance for easier access to controls and drum/opening
• Provides a built-in storage area for laundry or accessory items
• Restores a level, secure mounting surface when the original pedestal is damaged or missing
• Helps reduce wear by keeping the appliance properly aligned and slightly elevated from the floor

• Disconnect power (and water for washer units) before starting any work
• Use two people or proper lifting equipment to position the appliance onto the pedestal
• Align mounting points and secure per manufacturer's fasteners; do not overtighten
• If the pedestal contains electrical connections (e.g., for drawer lights), follow OEM wiring instructions