Parts for Kitchenaid KSM90PSGN0: 01 - Color Variation Parts

This motor housing sub-assembly secures the motor and blower components, restoring proper alignment and enclosure to the assembly. It replaces a cracked, damaged, or corroded housing to reduce vibration and restore safe operation. What it does:

• Supports and encloses the dryer motor and blower wheel to keep components aligned
• Helps reduce noise, vibration, and rubbing caused by a damaged housing
• Prevents motor and wiring from contacting the cabinet or drum
• Can resolve issues where the motor assembly is loose, misaligned, or exposed

• Disconnect power before starting any repair; follow all safety guidelines
• Basic hand tools typically required; mounting hardware may be reused if undamaged
• Inspect adjacent parts (motor mounts, blower wheel, seals) while installing

Fix excessive vibration or unusual motor noise with this stand mixer motor housing. Secures and aligns the motor for stable, quiet operation.

Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.

Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.

Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.

Imperial gray body housing cover for stand mixers. Replace this outer shell if cracked, scratched, discolored, or damaged. Restores mixer appearance.

If your stand mixer runs loud or vibrates excessively, a cracked motor housing may be the cause. This housing secures and protects the motor assembly.

This is a black plastic motor housing that encloses and protects the dishwasher's motor assembly. It provides structural support and shields the motor from debris and moisture during operation. Replace this housing if it is cracked, warped, or damaged, which can cause motor vibration, unusual noise, or water leaks near the motor area.

This gearcase housing is the molded outer case that supports and protects the washer transmission/gearcase assembly, keeping internal gears aligned for reliable spin and agitation performance. What it does

• Replaces a cracked, broken or warped gearcase outer housing that can cause gearbox misalignment
• Restores correct mounting and support for the transmission and related internal gears
• Helps stop wobbling, grinding noises or agitation/spin issues caused by a damaged housing
• Preserves seals and internal components by providing correct enclosure and alignment

• Inspect surrounding seals, fasteners and the gearcase for wear while replacing the housing
• Disconnect power and water supply before beginning work; drain tub and follow manufacturer safety procedures
• Use correct fasteners and torque per OEM specifications to avoid leaks or misalignment

Restores the finished edge on your stand mixer, covering gaps where panels meet. Replaces scratched, dented, or missing trim for a clean, factory look.

This is the planetary gear assembly used in the dishwasher's wash system. It drives the rotation of the spray arms to ensure even water distribution during wash and rinse cycles. Replace this assembly if the spray arms are not rotating properly, dishes are coming out dirty, or you notice grinding noises during operation.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Fix grinding noise and poor mixing with this planetary assembly. Restores drive alignment for smooth mixer operation. Moderate DIY repair for most users.

Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.

This planetary gear assembly is a key component in the dishwasher's spray arm drive system, converting motor rotation into the oscillating motion needed to distribute water throughout the wash tub. It consists of a set of gears housed in a compact assembly that meshes with the motor output. Replace this part if the spray arms are not rotating properly, dishes are coming out dirty, or you hear grinding noises during the wash cycle.

Color: White

This end cover protects and finishes the exposed end of the appliance component, keeping wiring and internal parts shielded while restoring the original appearance. It fits into the component housing and snaps into place for a clean finish. What it does:

• Covers and protects the exposed end of the component housing to help prevent dust and debris entry
• Helps keep wiring and terminals shielded from accidental contact
• Restores the original appearance where the original cover was cracked, discolored, or missing
• Matches the OEM color scheme for a factory look

• Designed to snap or screw into the component housing—verify orientation before seating
• Use basic hand tools; avoid prying on tabs to prevent breakage
• Disconnect power to the appliance before attempting removal or installation
• If tabs or mounting points are damaged, replace associated housing parts as needed

This is an end cover that attaches to the outer edge of the dishwasher door or kick plate to provide a finished appearance. It snaps or slides into place to conceal exposed edges and internal components. Replace this cover if it is cracked, discolored, or missing, which can leave the dishwasher looking unfinished.

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

White console end cap for stand mixers. Covers the exposed end of the motor housing for a finished look. Replace if cracked, broken, or missing.

Replacement cover for stand mixer housing. Protects internal components and provides finished appearance. Needed when original is cracked or broken.

This is a decorative end cover that attaches to the body of a stand mixer. It conceals internal components and provides a finished appearance to the mixer housing. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.

Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.

This is a small protective end cover that attaches to the exterior of the dishwasher, concealing internal components and providing a finished appearance. It helps shield the covered area from moisture and debris. Replace this cover if it is cracked, broken, missing, or no longer snaps securely into place.

This is a cover designed for the coin box assembly on a commercial-style dishwasher or laundry appliance. It protects the coin mechanism from tampering and debris. Replace this cover if it is cracked, broken, or missing, which can leave the coin mechanism exposed and vulnerable to damage.

White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.

Fix mixer grinding noises or gear slipping with this gearcase assembly. Common repair for stand mixers that won't mix properly or make unusual sounds.

This is the lower gearcase housing for a stand mixer, finished in empire red. It encloses the gears and internal drive components that transfer motor power to the mixing attachments. Replace this gearcase if it is cracked, leaking lubricant, or if the housing is damaged and no longer properly supporting the internal gear assembly.

This is the lower gear case housing that encloses the internal gears and drivetrain of a stand mixer. It protects the gears from debris and helps maintain proper alignment for smooth power transfer to the mixing attachments. Replace this gear case if it is cracked, leaking lubricant, or if the mixer produces grinding noises indicating internal gear misalignment.

This is the gearcase that houses the internal gears responsible for transferring motor power to the mixing attachments in a stand mixer. It contains the gear train that controls speed and torque output. Replace this gearcase if you hear grinding noises, the mixer struggles under load, gears are visibly worn or stripped, or if lubricant is leaking from the housing.

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This is the gearcase (gearbox) housing for a stand mixer, which contains and supports the internal gears that transfer motor power to the mixing attachments. It serves as the structural enclosure for the gear train assembly. Replace this part if the gearcase is cracked, leaking lubricant, or if the gears are no longer properly supported, causing unusual noises or wobbling during operation.

Replacement pedestal base for stand mixers. Supports and stabilizes the mixer body. Order a new pedestal if yours is cracked, damaged, or discolored.

Replacement pedestal base for stand mixers. This bottom support platform provides structural stability. Order if your original is cracked or damaged.

White pedestal base for stand mixers. Replaces cracked, chipped, or damaged pedestals that affect stability and appearance. Restores base support.