Parts for Kitchenaid 5KSM175PSEVB4: Color Variation Parts

A replacement housing that secures and protects the appliance's internal components and mounting points. Restores structural support and helps reduce vibration or movement caused by damaged or cracked housings. What it does:

• Provides a stable mounting surface for internal assemblies and fasteners
• Protects internal parts from debris and accidental contact
• Restores proper alignment to reduce noise, vibration, and movement
• Addresses visible cracks, broken mounting tabs, or warped housing edges that compromise fit

• One housing

• Disconnect power and water before beginning any repair
• Handle edges carefully; use gloves to avoid cuts from sharp sheet-metal or plastic
• Basic hand tools required; follow the appliance service manual for disassembly/reassembly
• If mounting tabs or adjacent parts are damaged, inspect and replace those items as needed for a complete repair

This replacement gear housing secures and encloses the drive gears that transfer motor motion to the washer's agitator/drive assembly, restoring proper mechanical drive function and reducing noise from worn or damaged housings. What it does:

• Houses and supports the drive gears that transfer motor rotation to the agitator/drive mechanism
• Prevents gear misalignment and keeps lubricant contained for smooth operation
• Commonly used when the washer makes grinding, grinding-like, or unusually noisy operation
• Can resolve symptoms like lack of agitation or intermittent drive engagement caused by a broken or cracked housing

• Disconnect power (and water if applicable) before beginning any repair
• Remove access panels and drive components per service manual to access the housing
• Inspect gears, seals, and fasteners; replace any damaged components before reassembly
• Test the appliance on a short cycle after installation to confirm proper operation

Replaces the front grille housing on your stand mixer. Needed when the original is cracked, warped, discolored, or missing. Almond creme finish.

Empire red housing for stand mixers. Replaces cracked, chipped, or discolored exterior covers. Restores appearance and protects internal components.

This is the main outer housing for a stand mixer, finished in black. It encloses and protects the motor and internal gearing of the mixer. Replace the housing if it is cracked, chipped, or broken, which can expose internal components to damage or create a safety hazard during operation.

This is a black plastic motor housing that encloses and protects the dishwasher's motor assembly. It provides structural support and shields the motor from debris and moisture during operation. Replace this housing if it is cracked, warped, or damaged, which can cause motor vibration, unusual noise, or water leaks near the motor area.

Fix grinding noises or bowl rotation issues with this gearcase housing. Protects motor gears and restores smooth operation in your stand mixer.

This replacement cover restores the appliance's exterior finish and protects internal components from dust and damage. It helps maintain safe operation and a factory appearance after damage or wear. What it does:

• Replaces damaged, cracked or missing outer cover to prevent exposure of internal parts
• Shields wiring and components from dust and debris
• Restores proper airflow paths and helps reduce vibration-related noise when installed correctly
• Improves the appliance's appearance and helps preserve value

• Disconnect power before beginning any service to avoid electric shock
• Remove only the panels and fasteners necessary to access and replace the cover; keep track of screws and clips
• Handle the cover carefully to avoid scratching the finish; align tabs and fasteners before tightening

This replacement cover is an access panel that protects internal components and restores the appliance's appearance. It keeps wiring and mechanical parts shielded while maintaining a clean exterior surface. What it does:

• Covers and protects internal components from dust, debris and accidental contact
• Restores the appliance's exterior finish after damage or removal
• Helps reduce rattles or vibration caused by loose or broken panels
• Provides a secure mounting surface for adjacent panels and controls

• Disconnect power (and water if applicable) before beginning service
• Use proper hand tools; avoid overtightening fasteners to prevent cracking
• Handle edges carefully to avoid cuts and to prevent cosmetic damage
• Refer to your model's service manual or parts diagram for correct placement and fastener locations

This replacement cover protects and secures internal components and wiring, restoring a finished appearance and helping prevent debris intrusion. It's a like-for-like exterior housing piece used on compatible Whirlpool appliances. What it does

• Covers and protects internal electronics, terminals, and wiring from dust and accidental contact
• Restores the appliance's finished exterior where the original cover was missing or damaged
• Helps maintain proper airflow paths and component positioning when installed correctly
• Can reduce vibration-related noise by keeping parts secured and enclosed

• One cover

• Disconnect power (unplug or switch off circuit breaker) before starting any repair
• Removal/installation usually requires removing a few screws and lifting the old cover off; keep fasteners for reassembly
• Handle edges carefully; use gloves to avoid cuts and protect painted surfaces

Replace the end cover on your stand mixer when the original is cracked, broken, or missing. This cosmetic panel installs on the motor housing end.

This is a decorative end cover that attaches to the body of a stand mixer. It conceals internal components and provides a finished appearance to the mixer housing. Replace this cover if it is cracked, broken, or missing, which can leave internal parts exposed.

Replacement access panel cover for stand mixers. Shields internal wiring and controls while restoring exterior appearance. Replaces cracked or missing covers.

This is a cover designed for the coin box assembly on a commercial-style dishwasher or laundry appliance. It protects the coin mechanism from tampering and debris. Replace this cover if it is cracked, broken, or missing, which can leave the coin mechanism exposed and vulnerable to damage.

White plastic back cover for stand mixers. Protects internal components at rear of motor housing. Replace if cracked, broken, or missing.

If your stand mixer makes grinding noises or the beater doesn't rotate properly, the planetary gear assembly may need replacement. Moderate DIY repair.

This is the planetary gear assembly for a stand mixer, which drives the rotating motion of the mixer attachments in an orbital path around the inside of the bowl. It connects the motor's output to the attachment hub, ensuring thorough and even mixing. Replace this part if the mixer head wobbles excessively, attachments spin erratically, or the mixing action becomes uneven or stops altogether.

If your mixer won't spin or makes grinding noises, the planetary gear assembly may be worn. This part transfers motor power to attachments. Moderate DIY.

Fix mixer wobbling or grinding noises with this planetary gear assembly. Essential for smooth mixing action. Moderate repair with periodic greasing.

This planetary gear assembly is a key component in the dishwasher's spray arm drive system, converting motor rotation into the oscillating motion needed to distribute water throughout the wash tub. It consists of a set of gears housed in a compact assembly that meshes with the motor output. Replace this part if the spray arms are not rotating properly, dishes are coming out dirty, or you hear grinding noises during the wash cycle.

Color: White

Mixer not turning or making grinding noises? This gearcase assembly houses the planetary gears that drive your attachments. Moderate DIY repair.

This is the gearcase that houses the internal gears responsible for transferring motor power to the mixing attachments in a stand mixer. It contains the gear train that controls speed and torque output. Replace this gearcase if you hear grinding noises, the mixer struggles under load, gears are visibly worn or stripped, or if lubricant is leaking from the housing.

This direct-drive gearcase converts the washer motor's power into the agitation and spin motions. Replacing a worn gearcase restores normal drive function so the washer can agitate and spin as intended. What it does

• Transfers motor rotation to the agitator and spin basket for wash and spin cycles
• Worn or damaged gear teeth can cause no agitation or no spin
• Damaged gearcase may produce loud grinding, clunking, or unusual noises during operation
• Failure can cause intermittent drive or loss of drive in one or both cycles

• Disconnect power and water before starting any repair to prevent shock or flooding
• Drain the washer and secure the tub/agitator before removing components
• May require removing the cabinet or access panels and supporting the drum during service

This is the gearcase (gearbox) housing for a stand mixer, which contains and supports the internal gears that transfer motor power to the mixing attachments. It serves as the structural enclosure for the gear train assembly. Replace this part if the gearcase is cracked, leaking lubricant, or if the gears are no longer properly supported, causing unusual noises or wobbling during operation.

This pedestal feet assembly provides the lower support and leveling for a laundry pedestal, helping keep the pedestal stable and aligned beneath the washer or dryer. Designed to restore proper support and reduce rocking. What it does:

• Replaces damaged or worn pedestal feet that cause rocking, uneven height, or instability
• Provides adjustable support to help level the pedestal on uneven floors
• Protects floors by maintaining proper pedestal alignment and preventing scraping
• Restores safe, secure support for appliances installed on the pedestal

• Follow the appliance and pedestal manufacturer instructions; have a second person or proper support to prevent tip-over when removing or installing the pedestal
• Ensure the appliance is powered off and disconnected from utilities if appliance removal or repositioning is required
• Use basic hand tools; confirm all fasteners are tightened securely after installation

This pedestal raises a front-load laundry appliance to a more comfortable loading height and improves accessibility. It provides a stable base to reduce bending and make transferring clothes easier. What it does:

• Lifts a front-load washer or dryer for easier loading and unloading
• Improves ergonomics to reduce bending and strain when reaching into the drum
• Creates a stable, level base to help prevent tipping or rocking
• Can help align the appliance with surrounding cabinetry for a cleaner installation

• Installation typically requires lifting the appliance onto the pedestal; use two people or a lift to avoid injury
• Disconnect power and water before beginning work
• Follow the OEM instructions and use the factory mounting hardware for a secure fit

This pedestle is the replacement agitator post that supports and centers the washer agitator, restoring proper agitation and load stability for top-load washers. It's a direct-fit part used during agitator assembly repairs. What it does:

• Centers and secures the agitator on the transmission shaft for effective wash action
• Helps transmit agitation motion from the transmission to the agitator
• Commonly replaced when the agitator wobbles, slips, or does not rotate properly
• Restores stable operation without requiring a full agitator or transmission replacement

• One pedestle (agitator post) as shown

• Disconnect power to the washer before beginning any repair
• Remove agitator per manufacturer instructions to access and replace the pedestle
• Use appropriate hand tools; keep fasteners organized for reassembly