Columbia Lawn Mower Parts

This is a height adjustment plate that is used on lawnmowers by a variety of manufacturers. It is made of durable metal and is an integral part of the mower. It ensures the mower wheels can be raised or lowered to create the desired cutting height for the blades. Over time, the height adjustment plate on a lawnmower can wear out or become damaged and will need to be replaced.When the height adjustment plate needs to be replaced, a pair of pliers and a wrench will be required. Place the lawnmower on a stable surface and disconnect the spark plug wire. Take out the bolts on the front end before removing the plate. There will be additional bolts to remove to take off the height adjustment place. The front axle can be pried out of the clips using a screwdriver. Fasten on the new adjustment plate and reassemble the other components.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The height adjustment plate is compatible with lawnmowers manufactured by MasterCut, Yard-Man, Bolens, Huskee, MTD, Yard Machines, Murray, Troy-Bilt, and Craftsman.

The purpose of the fuel nipple in a small engine is to clean the fuel before it reaches the carburetor. If the fuel is dirty, it could cause issues with the carburetor and other parts of the engine. If the engine misfires, has a fuel odor, leaks, or has problems with dirty fuel getting into the carburetor, it may be time to replace the fuel nipple. It is an easy replacement, but be sure to work in a well-ventilated area. Drain the fuel tank and disconnect the spark plug before beginning this repair. This OEM fuel nipple is a genuine part right from the manufacturer. This fuel nipple can work well for snowblowers, snow throwers, chippers, tillers, and log splitters. It is compatible with a range of models from brands like Craftsman, Yard Machines, Yard-Man, MTD, and Troy-Bilt.

This is a replacement fuel bowl gasket that is specifically made for select models of snowblowers. The fuel bowl gasket is used to create a seal in the fuel bowl, allowing the carburetor to maintain appropriate pressure and deliver the fuel properly throughout the engine. Over time, gaskets like this one will become compressed and deteriorated, creating a leak in their seal. This can lead to fuel or air leakage, poor engine performance, and more serious damage if left unrepaired. Replacing gaskets is typically considered routine maintenance, and it is essential to replace them as quickly as possible. This genuine fuel bowl gasket is manufactured to OEM specifications by MTD and designed for use in select machines from MTD, as well as those from Cub Cadet, HUSKEE, Lawn Chief, RYOBI, Troy-Bilt, Craftsman, Remington, Yard Machines, Yard Man, and Bolens. There are hundreds of machines that can use this fuel bowl gasket. It is made of durable rubber material and sold as a single unit. Always be sure to inspect gaskets when performing other maintenance and repairs and use the correct tools for gasket replacement to prevent damage during installation.

This air cleaner cover is designed to house the air filter on larger lawn equipment and other outdoor power tools. There is no aspect of small engine care more necessary than protecting the air that goes into the carburetor and cylinder from yard dust. Nothing is more incapacitating to a small engine than being clogged with dust, pollen, and other particulates that are invariably stirred up during landscaping work. While the air cleaner cover itself is not a moving part and would not seem to be subject to replacement, it is occasionally the case that, through extensive use or accidental contact, the cover becomes unable to shield the air filter within it. In these cases, it is essential to replace the cover with an OEM certified replacement cover that has been manufactured to the same specification as the original. Though replacing the cover itself is quite simple, it probably a very good idea to replace the air filters at the same time. If the cover is in need of replacement, it is quite likely the filters have been exposed to excessive amounts of particulate. This cover can be used on chippers, shredders, log splitter, mowers, and a variety of other small engine/large job equipment. Compatible brands include Troy-Bilt, MTD, Yard-Man, Yard Machines, and Cub Cadet.

Here is a replacement fuel tank for use with a range of different models of small engines. The fuel tank plays one of the most important roles in a machine with an internal combustion engine. The tank holds the gas, which flows through the fuel line, so the machine can operate. Although fuel tanks are durable and built to last, there could be any number of reasons that one may need to be replaced. On older machines, for example, the fuel tank could have become damaged or corroded. Even newer machines could have a faulty fuel tank that would need to have a replacement. If there is an issue with the tank, it is not a replacement that can wait. The tank could be leaking fuel, for example, which can be wasteful as well as dangerous. This genuine OEM replacement fuel tank is identical to the one that came with the machine. It is sold individually and does not include any of the hardware needed for replacement. It can work with dozens of models of tillers, log splitters, and other small engines. Compatible brands include Troy-Bilt, Cub Cadet, MTD, HUSKEE, MasterCut, and Yard Machines.

This muffler is a genuine MTD part, sold individually. This muffler can be used as a replacement part for a lawn tractor. The purpose of a muffler for a lawn tractor is to quiet down the noise that comes out of the exhaust while the appliance is in operation; the muffler also prevents stray sparks from firing into grass and leaves.The muffler might have to be replaced if it exhibits clear signs of damage. If the exhaust is unusually loud or if external materials are being ignited by the lawn tractor while in operation, it is likely that the muffler is broken or malfunctioning. If this is the case and the muffler cannot be repaired, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This muffler is compatible with the following outdoor appliance brands: MTD and Craftsman.

This replacement part is a transmission belt. This is a genuine replacement part made by MTD. This transmission belt is used in many different types of machinery and is responsible for helping keep parts moving within the transmission of the machine.A new transmission belt might be needed if the current one is missing or damaged in any way. If there are unusual noises coming from the engine, it can be due to a faulty transmission belt. Other damage can include being torn or stripped down due to years of normal wear and tear. Be sure to wear work gloves during this repair as this part is often close to other pieces that can cause injury.This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This spacer is a genuine MTD part that can be used as a replacement part for several different kinds of small engines, including lawn mowers, snowblowers, and wood-chippers. A spacer's function is to serve as a means to lengthen the distance between parts by fitting over a bolt or a screw to secure and maintain that distance. A reason to replace a spacer might be simply losing or misplacing the spacer itself, as it is small and can easily fall through cracks or unscrew itself over long periods of time. Other reasons include the gradual rusting, deterioration, bending, or cracking materials that can be attributed to general overuse or long-term exposure. If a spacer is subject to any of this kind of damage, it is best to replace it before using an appliance that requires a functioning spacer, as the malfunctioning spacer might cause permanent or serious damage. Always wear gloves when handling, repairing, and operating outdoor equipment. This spacer part is compatible with the brands MTD, Troy-Bilt, Yard Machines, and Yard-Man. This part is sold individually.

This timing belt is a genuine MTD part, sold individually. This timing belt can be used as a replacement part for a lawnmower. The timing belt maintains the positioning of the blades so that they are rotated in time without interfering with one another.The timing belt might have to be replaced if it is damaged or is not working properly within the infrastructure of the appliance. If the blades are knocking into each other while the lawnmower is in operation or if the belt shows signs of damage in the form of punctures, piercings, tearing, or erosion, the timing belt should be removed and replaced with this genuine OEM replacement part before using the lawnmower again. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This timing belt is compatible with the following outdoor appliance brands: MTD, Craftsman, Troy-Bilt, and Cub Cadet.

This spindle assembly is a genuine MTD part, sold individually. This spindle assembly can be used as a replacement part for a lawn mower. The spindle assembly comes with all of the necessary components required to install the spindle. The purpose of the spindle is to rotate the blades so they cut the grass and greenery evenly when in operation.If the spindle is punctured, torn, or otherwise eroded from general wear and tear with long-term use or from a direct impact with a hard object, it should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle assembly is compatible with the following outdoor appliance brands: MTD, Cub Cadet, Craftsman.