Parts for Lg LBNC15231V/00: Compressor / Base Parts

This rear handle is a direct-replacement door handle that restores a secure grasp and smooth door operation. Durable molded construction matches the original fit to keep your refrigerator door aligned and easy to open. What it does:

• Replaces a cracked, broken or missing rear door handle to restore safe opening and closing
• Provides the mounting surface and grip for the refrigerator door latch and user access
• Helps prevent stress on door trim and fasteners caused by a damaged grip
• Matches OEM fit and attachment points for proper alignment

• One rear refrigerator door handle

• Includes the handle only; verify which fasteners or trim pieces are required for your model before installing
• Remove power to the appliance or open as recommended by the manufacturer before accessing door components
• Use proper tools to remove door trim/fasteners; take care not to over-tighten screws to avoid cracking the new handle

This rear handle is a direct-fit replacement that restores a secure grip for opening and closing the appliance door. It replaces a cracked, broken or loose rear handle so the door operates safely and comfortably. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces visibly cracked, chipped or broken handle parts
• Stops wobbling or loose-feeling door handles that make the door hard to use
• Helps prevent further cabinet or door damage caused by a failing handle

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removing the door trim or access screws; use the correct screwdriver or nut driver.
• Keep all removed fasteners for reassembly and do not overtighten replacement screws.

Replaces worn ice tray assembly to restore ice harvesting in your refrigerator. Install when ice cubes form unevenly or tray cracks. Confirm fit with model.

Ice spilling from damaged bin? This refrigerator ice storage bucket holds ice securely from your ice maker. Simple DIY swap in under 15 minutes.

Replacement vegetable crisper drawer tray for bottom-mount refrigerators. Installs in the fresh food section to hold produce. Order when cracked or broken.

Freezer door foam insulation assembly for bottom-mount refrigerators. Replaces damaged, compressed, or missing door foam that causes poor sealing.

Replace your refrigerator door gasket to restore proper seal and energy efficiency. Fixes air leaks, condensation, and warm temps. Confirm fit with model.

Sleeve that fits over the hinge pin for smooth door pivoting. Replace when doors wobble, squeak, or don't align properly. Confirm fit with your model.

Door foam insulation assembly for bottom-mount refrigerators. Seals and insulates the door panel. Replace if foam is compressed, deteriorated, or missing.

Replace your refrigerator door gasket assembly when the seal is torn, cracked, or not sealing properly, causing temperature issues or frost buildup.

This decor cover is the exterior trim piece that finishes the appliance's front and restores a clean, factory look. It conceals internal components while protecting the front from scratches and wear. What it does:

• Provides a finished, OEM-style exterior trim for a clean appearance
• Conceals and protects control components and internal edges from debris and damage
• Replaces cracked, warped, faded, or missing decorative trim
• Helps prevent drafts or light gaps around the control area

• Disconnect power to the appliance before beginning any work
• Remove adjacent trim or control panel fasteners as needed to access the cover
• Handle the part carefully to avoid scratching the finish during installation

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Replaces the upper door basket access panel on your refrigerator. Covers and secures the storage compartment. Needed when original is cracked or broken.

Molded storage bin that installs inside the refrigerator door. Replace if cracked, broken, or missing to restore organized storage for condiments.

Replacement door basket for bottom-mount refrigerator. Restores convenient storage for condiments and small items when original is cracked or broken.

This hinge cover replaces a damaged or missing hinge cap to restore your door's appearance and protect the hinge pivot from dirt and wear. Fits the hinge area and provides a clean, finished look. What it does:

• Conceals and protects the door hinge pivot from debris and moisture
• Prevents metal-on-metal contact that can cause wear or noise
• Restores original appearance when a cover is cracked or missing
• Helps reduce rattling or visible gaps around the hinge area

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panel if needed to reach the hinge.
• Snap or screw the cover into place — avoid forcing to prevent breakage.
• If hinge hardware is worn or loose, replace or tighten hardware before installing the cover.

A replacement hinge cap that covers and protects the door hinge assembly, restoring a finished look and helping keep the hinge free of debris. Fits where the hinge meets the cabinet or door trim. What it does:

• Covers the exposed hinge area to protect against dirt and damage
• Keeps door trim aligned and helps prevent rubbing or catching
• Restores appearance when original cap is cracked, missing, or broken
• Can reduce noise from a loose or exposed hinge

• Disconnect power to the appliance or unplug before starting any repair
• Typically snaps over the hinge or installs with existing fasteners—no special parts required
• Inspect hinge and surrounding trim for damage when replacing the cap

Fix a refrigerator that won't cool or runs constantly with this compressor assembly. Advanced repair requiring proper refrigerant handling and tools.

Protective cover for the PTC start relay on your refrigerator compressor. Replace if cracked, broken, or missing to shield relay components from damage.

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Drier assembly for refrigerators. Installs in the sealed refrigerant system to remove moisture and contaminants. Replace if damaged or worn during repair.

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

This fan blade attaches to the condenser fan motor located near the bottom rear of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigeration system running efficiently. Replace this blade if it is cracked, warped, or broken, which can cause loud noises, poor cooling performance, or the compressor overheating and shutting off.

Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.

This is a rubber or elastomer damper that supports and isolates the evaporator fan motor inside the refrigerator. It absorbs vibration from the motor to reduce noise during normal operation. Replace this part if you hear excessive buzzing, rattling, or vibration coming from the freezer section, which often indicates the damper has hardened or deteriorated.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

Fixes refrigerator that won't cool, has no power, or displays error codes. This main power control board regulates all electrical functions. Moderate DIY.