Parts for Thermador T18BD80FL: Compressor Parts

A replacement shock absorber that cushions and appliance component to reduce noise and stabilize movement for smoother, more controlled operation. Restores dampening to doors or tubs that close unevenly or vibrate. What it does:

• Dampens and slows movement to prevent slamming and reduce impact wear
• Stabilizes panels or tubs to cut down on vibration and rattling sounds
• Helps maintain even, controlled closing and opening motion
• Commonly used when a door feels loose, drops, or closes too quickly

• Disconnect power (and water if applicable) before attempting service
• Retain original mounting hardware; only replace items explicitly listed as included
• Ensure correct orientation and secure fasteners; test operation after installation

Fix water dispenser not working or leaking with this outlet valve. Controls water flow from reservoir to dispenser. Moderate 30-45 minute repair.

This replacement top lid restores the appliance's sealed cover and appearance while protecting internal components from debris and moisture. It fits where the original top cover was damaged, cracked, or cosmetically worn. What it does:

• Replaces a cracked, warped, or broken top cover to protect internal parts
• Helps keep dust, water splashes, and debris out of the appliance interior
• Restores a secure, flush top surface and original appearance
• Reduces risk of further damage from exposed components

• Disconnect power and water (if applicable) before starting any repair
• Basic hand tools are typically required; handle edges carefully to avoid scratches
• Inspect mounting points/hinges during install; reuse or replace fasteners as needed

Condensate water container collects moisture from your refrigerator's cooling system. Replace if cracked, broken, or leaking to prevent water damage.

This shock absorber cushions and controls dishwasher door movement to reduce slamming and improve closing action. It helps protect the door and cabinet from impact and can reduce noise during operation. What it does:

• Dampens and slows the dishwasher door as it opens and closes
• Helps prevent sudden drops or slamming that can damage the door or hinges
• Reduces vibration and noise caused by uncontrolled door movement
• Restores smoother, more controlled door operation when the original shock wears out

• One shock absorber

• Disconnect power to the appliance before beginning any repair
• Remove the dishwasher door panels or access panels to reach the mounting points
• Support the door during removal/installation to prevent it from falling or binding
• Use the OEM mounting hardware and verify secure attachment and correct alignment after installation

Power cord for refrigerators and freezers. Connects appliance to wall outlet. Replace if cord is frayed, damaged, cracked, or missing its prongs.

Base panel for freezers. Replaces cracked, broken, or missing bottom trim panels. Installs at the base of the freezer cabinet for a finished look.

Mounting clip for refrigerator interior components. Secures shelves, bins, or panels in place. Replace if cracked, broken, or missing for proper fit.

Fixes incorrect temperature readings or frequent cycling. This thermistor monitors compartment temp for proper cooling. Moderate DIY repair, 30-45 minutes.

This is a protective housing or case that encloses an internal component in a range or oven. It shields the enclosed part from heat, moisture, or physical damage during operation. Replace this housing if it is cracked, warped, or damaged, which could leave internal components exposed and vulnerable to malfunction.

Adhesive mounting tape secures trim, wiring, and small components while reducing rattles and moisture intrusion. Replace when worn or loose. Verify fit with your model number before ordering.

Interior mounting plate for bottom-mount refrigerators and freezers. Replaces cracked, broken, or missing plates that secure internal components.

Replace a cracked or missing housing cover that exposes internal components to debris and moisture. Restores proper sealing and component protection.

This is a housing component used inside the freezer section of the refrigerator. It serves as a protective enclosure for internal parts such as sensors, lights, or fan assemblies, helping to keep them properly positioned and shielded. Replace this housing if it is cracked, broken, or warped, which can affect the proper operation of the components it protects.

Lower access panel that covers the freezer's front base area. Replace if your kick plate is cracked, broken, or missing to restore appearance.

Retaining washer for freezer and refrigerator internal assemblies. Secures components in place. Replace if cracked, broken, or missing during repairs.

Refrigerator not cooling or running constantly? This compressor powers your cooling system. Advanced repair requiring refrigerant handling expertise.

This is a filter drier used in the sealed refrigeration system to remove moisture and contaminants from the refrigerant lines. It is a small cylindrical component typically located along the refrigerant tubing between the condenser and the capillary tube. Replace this part if the refrigerator or freezer is not cooling properly due to a restricted or saturated drier, typically during a sealed system repair.

If your refrigerator cabinet feels warm or cooling is weak, the condenser fan may have failed. This fan circulates air over the condenser coil to remove heat.

The Water Valve is an OEM part for Bosch refrigerators. It regulates the flow of water into the ice maker and water dispenser.

The water valve allows water to fill the ice maker bucket or flow through the dispenser chute on demand. It controls water pressure and assists in proper ice formation.
Over time, mineral buildup can affect a water valve's ability to open and close smoothly. 

Symptoms of a bad water valve include:

• Slow or inadequate water flow from the dispenser
• Ice maker not filling or producing ice fully
• Water leaking inside refrigerator compartments
• No water dispensing when button is pressed

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Refrigerator not cooling or compressor not starting? This start relay controls the signal that initiates the compressor. Direct replacement part.

Fixes ice maker overflow and water leaking into freezer. This water inlet valve controls water flow to your dispenser and ice maker. DIY repair.

Leveling foot installs at the refrigerator base to support and level the unit. Replace if worn, cracked, broken, or missing to restore stability.

Secures the water filter in your refrigerator for a snug, leak-free fit. Replace if lost during filter changes, cracked, damaged, or worn out over time.

Removes impurities from your refrigerator's water and ice supply. Replace every 6 months for clean, fresh-tasting water. Verify fit by model number.