Parts for Lg LBNC15221V/00: Compressor / Pcb Cover Parts

This rear handle is a direct-replacement door handle that restores a secure grasp and smooth door operation. Durable molded construction matches the original fit to keep your refrigerator door aligned and easy to open. What it does:

• Replaces a cracked, broken or missing rear door handle to restore safe opening and closing
• Provides the mounting surface and grip for the refrigerator door latch and user access
• Helps prevent stress on door trim and fasteners caused by a damaged grip
• Matches OEM fit and attachment points for proper alignment

• One rear refrigerator door handle

• Includes the handle only; verify which fasteners or trim pieces are required for your model before installing
• Remove power to the appliance or open as recommended by the manufacturer before accessing door components
• Use proper tools to remove door trim/fasteners; take care not to over-tighten screws to avoid cracking the new handle

This rear handle is a direct-fit replacement that restores a secure grip for opening and closing the appliance door. It replaces a cracked, broken or loose rear handle so the door operates safely and comfortably. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces visibly cracked, chipped or broken handle parts
• Stops wobbling or loose-feeling door handles that make the door hard to use
• Helps prevent further cabinet or door damage caused by a failing handle

• Disconnect power to the appliance before beginning any repair.
• Installation typically requires removing the door trim or access screws; use the correct screwdriver or nut driver.
• Keep all removed fasteners for reassembly and do not overtighten replacement screws.

Protects your refrigerator's light bulb from moisture and damage. Replace if cracked, discolored, or broken to maintain proper lighting and safety.

Replaces worn ice tray assembly to restore ice harvesting in your refrigerator. Install when ice cubes form unevenly or tray cracks. Confirm fit with model.

Replaces cracked, warped, or missing ice storage bin in your freezer. Collects and holds cubed ice for dispensing. Durable plastic construction.

Replaces a cracked, broken, or worn upper refrigerator drawer tray. Restores stable storage and smooth slide-in/slide-out operation in your fridge.

Replacement drawer slide rail for bottom-mount refrigerators. Restores smooth gliding when original is cracked, bent, or worn. Installs on drawer side.

This slide rail supports and guides an oven rack or warming/drawer tray so it moves smoothly in and out. Replaces worn or bent rails to restore reliable rack travel and prevent scraping or sticking when opening and closing. What it does:

• Guides the oven rack/drawer for smooth, stable movement
• Replaces bent, worn or damaged rail that causes sticking or misalignment
• Stops racks from falling or becoming uneven when extended
• Reduces scraping, grinding or noisy operation during use

• One slide rail

• Turn off power to the appliance and allow it to cool before starting any work
• Use basic hand tools; do not overtighten fasteners to avoid distorting the rail

Metal track that supports and guides refrigerator or freezer drawers. Replace if bent, cracked, broken, or causing drawer misalignment or rough movement.

Replacement drawer cover panel for bottom-mount refrigerators. Restores appearance when original is cracked, broken, or discolored. Snaps into place.

Freezer door foam insulation assembly for bottom-mount refrigerators. Replaces damaged, compressed, or missing door foam that causes poor sealing.

Freezer door foam insulation assembly for bottom-mount refrigerators. Replaces damaged, compressed, or missing door foam that causes poor sealing.

Replace your refrigerator door gasket to restore proper seal and energy efficiency. Fixes air leaks, condensation, and warm temps. Confirm fit with model.

Sleeve that fits over the hinge pin for smooth door pivoting. Replace when doors wobble, squeak, or don't align properly. Confirm fit with your model.

Replacement name plate for your bottom-mount refrigerator. This label attaches to the exterior and displays model information. Needed when original is faded, peeling, or missing.

Door foam insulation assembly for bottom-mount refrigerators. Seals and insulates the door panel. Replace if foam is compressed, deteriorated, or missing.

Door foam insulation assembly for bottom-mount refrigerators. Seals and insulates the door panel. Replace if foam is compressed, deteriorated, or missing.

Replace your refrigerator door gasket assembly when the seal is torn, cracked, or not sealing properly, causing temperature issues or frost buildup.

This decor cover is the exterior trim piece that finishes the appliance's front and restores a clean, factory look. It conceals internal components while protecting the front from scratches and wear. What it does:

• Provides a finished, OEM-style exterior trim for a clean appearance
• Conceals and protects control components and internal edges from debris and damage
• Replaces cracked, warped, faded, or missing decorative trim
• Helps prevent drafts or light gaps around the control area

• Disconnect power to the appliance before beginning any work
• Remove adjacent trim or control panel fasteners as needed to access the cover
• Handle the part carefully to avoid scratching the finish during installation

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Replacement door basket for bottom-mount refrigerators. Restores secure storage for bottles and condiments when original bin is cracked or broken.

Replace your cracked or broken refrigerator door basket assembly. Restores secure storage inside the door. Direct-fit replacement for worn or missing baskets.

A replacement hinge cap that covers and protects the door hinge assembly, restoring a finished look and helping keep the hinge free of debris. Fits where the hinge meets the cabinet or door trim. What it does:

• Covers the exposed hinge area to protect against dirt and damage
• Keeps door trim aligned and helps prevent rubbing or catching
• Restores appearance when original cap is cracked, missing, or broken
• Can reduce noise from a loose or exposed hinge

• Disconnect power to the appliance or unplug before starting any repair
• Typically snaps over the hinge or installs with existing fasteners—no special parts required
• Inspect hinge and surrounding trim for damage when replacing the cap

This hinge cover replaces a damaged or missing hinge cap to restore your door's appearance and protect the hinge pivot from dirt and wear. Fits the hinge area and provides a clean, finished look. What it does:

• Conceals and protects the door hinge pivot from debris and moisture
• Prevents metal-on-metal contact that can cause wear or noise
• Restores original appearance when a cover is cracked or missing
• Helps reduce rattling or visible gaps around the hinge area

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panel if needed to reach the hinge.
• Snap or screw the cover into place — avoid forcing to prevent breakage.
• If hinge hardware is worn or loose, replace or tighten hardware before installing the cover.

Refrigerator not cooling or freezer warm? The compressor assembly circulates refrigerant to maintain temperature. Professional installation recommended.

Refrigerator not cooling and compressor is warm? This overload protector prevents compressor damage during electrical overloads or overheating.

This PTC cover is the protective housing that shields a PTC sensor/assembly from debris and physical damage, helping maintain reliable sensor performance and prolong component life in the appliance. What it does:

• Protects the PTC sensor or PTC assembly from dust, impact, and accidental contact
• Helps prevent shorting or intermittent sensor signals caused by contaminants
• Supports proper positioning and mounting of the PTC component
• Can help address symptoms such as visible sensor damage, exposed wiring, or intermittent operation related to a compromised sensor housing

• Disconnect power to the appliance before starting any repair
• Remove the outer panel(s) as needed to access the PTC location; handle surrounding wiring and components carefully
• Replace only with the correct OEM cover to ensure proper fit and protection

Fix a refrigerator not cooling properly with this compressor sealing pipe. Essential sealed system component for restoring proper refrigeration.

This is a small retainer clip that secures the compressor in place at the base of the refrigerator. It helps prevent the compressor from shifting or vibrating excessively during operation. Replace this clip if your refrigerator produces unusual rattling or vibrating noises from the back, or if the compressor appears loose or has shifted from its mounting position.

Fix refrigerator not cooling properly or running constantly with a new drier assembly. Removes moisture from refrigerant. Requires EPA-certified technician.

This noise damper reduces vibration and rattling sounds from refrigerant lines in your refrigerator. It cushions the copper tubing against the cabinet to prevent metal-on-metal contact that creates annoying noises. Install this damper if your refrigerator makes clicking, rattling, or vibrating sounds, especially when the compressor cycles on and off.

This fan blade attaches to the condenser fan motor located near the bottom rear of the refrigerator. It draws air across the condenser coils to dissipate heat and keep the refrigeration system running efficiently. Replace this blade if it is cracked, warped, or broken, which can cause loud noises, poor cooling performance, or the compressor overheating and shutting off.

If your refrigerator isn't cooling evenly or the freezer is noisy, the evaporator fan motor may have failed. This motor circulates cold air throughout.

Secures and supports the motor assembly in your refrigerator, keeping it aligned and reducing vibration. Replace if cracked, broken, or worn to restore stable mounting.

The Rear Evaporator Motor Grommet is an OEM part for LG refrigerators. It's designed to secure and cushion the evaporator motor, ensuring it remains in place and operates quietly. This grommet plays a crucial role in minimizing vibrations and noise from the motor, which can otherwise lead to a disruptive refrigerator operation.

Causes of a bad Rear Evaporator Motor Grommet can result from deterioration due to cooling and thawing cycles in the refrigerator. Physical damage during cleaning or servicing may cause a loose motor fit.  

Symptoms of a malfunctioning Rear Evaporator Motor Grommet include:

• Unusual noises or vibrations from the back of the refrigerator.
• The evaporator motor shifting out of place, which can affect cooling efficiency.
• Increased wear on the evaporator motor due to lack of proper cushioning and support.

This OEM LG part is also compatible with some Kenmore models.

This is a rubber or elastomer damper that supports and isolates the evaporator fan motor inside the refrigerator. It absorbs vibration from the motor to reduce noise during normal operation. Replace this part if you hear excessive buzzing, rattling, or vibration coming from the freezer section, which often indicates the damper has hardened or deteriorated.

Fix refrigerator lights staying on or not turning off when door closes. This magnetic door switch is a common solution. Simple DIY repair in 15 minutes.

Refrigerator not cooling or making clicking sounds? The compressor run capacitor provides electrical boost to start and run the compressor motor reliably.

This sheath heater is the tubular heating component that provides heat for drying cycles in compatible dryers, restoring normal drying performance when the heater element fails. It installs in the dryer's heating assembly and transfers heat into the drum airflow. What it does:

• Replaces the worn or broken heater sheath that contains the dryer's heating element
• Restores heating capability when a dryer produces little or no heat or clothes come out damp
• Helps correct overheating or erratic heating caused by a damaged sheath or compromised element
• Works with the dryer's air flow and thermal controls to generate usable heat for cycles

• One replacement sheath heater

• Disconnect power (and gas supply for gas models) before starting; test for live circuits before touching components
• Handle the sheath carefully to avoid bending or damaging the tubular element
• Basic hand tools are typically required; follow the dryer's service manual for proper removal and reassembly

This decorative control panel trim replaces the front bezel that surrounds the microwave's control area, restoring appearance and protecting the underlying buttons. It gives a finished look after damage or wear to the original trim. What it does:

• Covers and protects the control buttons and display area from dirt and wear
• Restores a clean, finished appearance to a worn, cracked, or faded control front
• Helps keep buttons and internal controls free of spills and debris
• Suitable when the original bezel is scratched, broken at mounting points, or cosmetically damaged

• Disconnect power before beginning any service to avoid shock
• Installation typically requires removing the microwave outer case and a few screws or clips; handle inner components gently
• Avoid forcing tabs or bending the bezel; align mounting points before securing

This replacement sensor cover protects the washer lid sensor assembly and helps keep the sensor aligned for proper operation. It restores the sensor housing so lid-detect functions work reliably. What it does:

• Shields and secures the lid sensor assembly from moisture, lint, and physical damage.
• Helps maintain correct sensor alignment so the washer can detect lid position.
• Commonly replaced when the original cover is cracked, broken, or missing.
• Resolves symptoms like lid-not-detected errors or intermittent lid-related cycle interruptions.

• Disconnect the appliance power before beginning any repair.
• Handle the cover and sensor gently to avoid damaging the sensor or wiring.
• Follow the appliance service manual for correct removal and reassembly procedures.