Parts for Bosch HDI8054U/02: Control Panel / Burner Asy Parts

Trim plate for gas ranges. Installs around burner or control area to provide a finished look. Replace if cracked, chipped, discolored, or missing.

Replaces cracked, chipped, or worn cooktop surface panel on gas ranges. Restores flat cooking surface and provides secure mounting for burners and grates.

Fix uneven flames or burner ignition issues with this cooktop burner cap. Distributes gas flame evenly and protects the burner head from spills.

Fix uneven flames or damaged burner tops with this gas range burner cap. Restores proper flame distribution. Easy DIY repair, takes 5 minutes.

Uneven flame or poor ignition? A damaged burner cap disrupts flame shape and heat distribution. This replacement cap restores even cooking and safety.

The Screw is an OEM part for Bosch gas cooktops and ranges. It anchors the surface burner head assembly onto the cooktop surface.

Causes can be stripped threads or overall wear from repeated heating/cooling cycles. Exposure to cooking spills or impacts may also deteriorate the screw head over time.

Symptoms of a bad burner head screw include:

• A burner detaching from the cooktop surface entirely
• Excess movement or instability of burner heads when in use
• Gas leaks reported around the burner head connection points

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replace your gas range burner to restore even flames and reliable ignition. Fixes hard-to-light, uneven, or yellow flames caused by warping or clogs. Confirm fit with your model number.

Restores even gas flow and reliable ignition on your cooktop. Replace if burners won't light, flame is uneven, or performance has declined. Confirm fit.

If your cooktop burner won't heat evenly or has visible cracks, this surface burner restores safe, efficient cooking. Direct replacement component.

Sheet panel for wall ovens and ranges. Installs inside the oven cavity as a structural component. Replace if cracked, damaged, or missing.

Fix a blank, flickering, or unresponsive oven display. This electronic control module restores touchpad function and temperature settings. DIY-friendly repair.

The Front Control Panel is an OEM part for Bosch ranges. It houses all user interface buttons and digital displays. Manufactured from heat-resistant composite materials, the front control panel withstands demanding oven environments.

Causes of a damaged front control panel include long-term heat exposure slowly degrading surfaces and electronically conductive pathways. Spills, impacts, and abrasions from prolonged use can also compromise structural integrity.

Symptoms of a damaged front control panel include:

• Cracks, clouding or peeling of coated surfaces
• Faulty, stuck or unresponsive control buttons
• Distorted or cracked digital displays and interfaces
• Warping allowing entry of debris or reducing water resistance

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Mounting screw secures internal oven components and panels. Replace if stripped, missing, or damaged during service. Essential hardware for reassembly.

Mounting screw that secures panels and internal components in your range. Replace if screw is lost, stripped, or worn to restore secure fit and stop rattling.

This small rubber ring seals the gap between the control knob and the range surface, preventing spills and debris from entering the control mechanism. Replace when the gasket becomes cracked, torn, or missing, allowing liquids to seep behind the control panel or causing the knob to feel loose.

Cracked, stripped, or missing burner knob? This surface burner control knob restores heat adjustment on your gas range. Simple snap-on install.

This cable harness routes electrical signals between dishwasher components to restore proper control and power delivery. It replaces a damaged or broken wiring assembly so affected circuits can communicate and operate reliably. What it does:

• Connects control board, sensors, pumps and other internal components to carry power and signals
• Restores intermittent or lost power to specific assemblies caused by frayed or broken wires
• Helps eliminate error codes or failures tied to open or shorted harness connections
• Prevents arcing and poor connections that can cause unreliable operation

• One cable harness assembly as pictured

• Only install after disconnecting power to the appliance to avoid shock or damage
• Inspect mating connectors and pins for corrosion or damage before connecting
• Route harness away from sharp edges, moving parts and hot surfaces to avoid future wear

Fix intermittent power or electrical faults in your range with this cable harness. Routes power and signals between control and components. Direct fit.

Replacement mounting screw for ranges and wall ovens. Secures panels, brackets, and assemblies in place. Needed when original is lost, stripped, or damaged.

This set of jets replaces worn or clogged spray nozzles to help restore even water distribution for better cleaning. Designed for the dishwasher spray system, the jets direct pressurized water to remove food soils. What it does:

• Replaces damaged or clogged spray nozzles to improve spray coverage and cleaning performance
• Restores correct water flow pattern from spray arms or manifolds
• Reduces uneven washing, spots, or missed areas caused by blocked jets
• Works as a direct-fit service part where specified

• One set of replacement jets as sold

• Disconnect power and turn off the water supply before beginning any repair
• Remove the spray arm or access panel to reach the jets; small tools may be required
• Inspect surrounding gaskets and fittings; replace if cracked or leaking

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.