Parts for Ge JGB920SEF2SS: 02 - Control Panel & Cooktop Parts

Felt pad seal cushions your range door, reducing noise and preventing rattling. Replace when worn, compressed, or damaged to restore quiet operation.

Color: Black. Left hand side.

Color: Black. Right hand side.

Color: Stainless

This replacement OEM part is a glass touch control board for ovens. The glass touch control board is the computer that controls the glass touchpad for ovens controlling the oven's settings and primary functions. If the touchpad is no longer responsive, this could mean it's time to be replaced. Luckily, replacing a glass touch control board is a fairly simple repair. Start by shutting off the power to the oven by either unplugging it or turning off the circuit breaker. Pull the oven away from the wall and access the back panel. Remove the panel and locate the touchpad control board. Snap it out of its mounting brackets and remove the wire harness along with the individual wires. Take note of the wire's orientation. Reinsert the wire harness and wires to their correct terminals on the new touchpad board. Pop the touchpad into place and resecure the upper back panel.This genuine replacement part is compatible with General Electric, Hotpoint, and RCA brand ovens.

Replaces the lower back cover panel on your range. Install this protective housing if your original is cracked, broken, or missing. Secures to rear.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently. 

Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time. 

Symptoms of a bad spark module include:

• Burners that will not ignite or only intermittently ignite 
• Flashback or burning above the burner head 
• The smell of gas when turning burners on

This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges. 

Replacement oven door hinge for gas and electric ranges. Secures and supports the oven door for smooth opening and closing. Needed when hinge is bent, broken, or door sags. Direct fit replacement part.

Color: Black

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Burner base that sits beneath the burner cap on your cooktop. Replace this component if damaged, cracked, or missing to restore your burner's appearance.

Burner base for gas cooktops, secures to cooktop surface and holds igniter assembly. Replace if cracked, broken, or damaged during repairs.

Burner base installs beneath the burner cap on gas cooktops. Replace if cracked, warped, or dome-shaped to restore proper flame coverage and alignment.

Replace a cracked or broken burner base on your cooktop. This 3-inch diameter base supports the burner cap and installs directly on the cooktop surface.

Approx 2 inches in diameter

Fix orange flames, carbon deposits, or uneven burner caps with a new burner head. Common fix for flame color issues. Straightforward replacement.

Approx 3-1/4 inches in diameter

Left-side burner cap that centers and protects the burner head while shaping the flame. Replace if cracked, chipped, or worn to restore proper coverage.

Seals the cooktop to your range, preventing spills from entering the burner area. Replace if cracked, worn, or leaking. Verify fit with your model number.

Seals and cushions the edge of your range's glass or ceramic cooktop to keep out spills and reduce vibration. Replace if worn or damaged. Confirm fit.

Approx 4-1/4 inches in diameter

Color: Graphite for Stainless models.

Aluminum washer for range installation and assembly. Replaces worn, missing, or damaged washers in your range. Essential hardware component.

Secures the burner cap to your range cooktop. Replace if loose, damaged, or causing uneven flames. Confirm fit with your model number before ordering.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.