Parts for Ge JGB928TEK1WW: 02 - Control Panel & Cooktop Parts

Replace worn felt pad gasket to prevent heat loss and reduce noise in your range. Cushions components and ensures proper sealing. Confirm fit with model number.

White left-hand end cap for your range. Replaces cracked, broken, or missing endcaps on the side of your cooktop. Restores cosmetic appearance.

White plastic end support cap for the right side of your range. Replaces cracked, broken, or missing endcaps to restore the finished appearance.

Replaces the lower back cover panel on your range. Install this protective housing if your original is cracked, broken, or missing. Secures to rear.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.

Secures components to your appliance chassis for a rattle-free fit. Replace missing, stripped, or corroded screws to keep panels and brackets aligned.

The Spark Module is an OEM replacement part for GE gas ranges. It is responsible for generating electric sparks to ignite the gas burners on the cooktop. The spark module produces consecutive sparks when a surface burner knob is turned on, which ignite the gas mixture and allows the burner flame to ignite safely and consistently. 

Causes of a bad spark module can include faulty electrodes, worn internal components that hamper sparking, or damage due to moisture intrusion or power surges over time. 

Symptoms of a bad spark module include:

• Burners that will not ignite or only intermittently ignite 
• Flashback or burning above the burner head 
• The smell of gas when turning burners on

This GE replacement part is also compatible with models from Hotpoint, RCA, and certain Kenmore gas ranges. 

Replacement oven door hinge for gas and electric ranges. Secures and supports the oven door for smooth opening and closing. Needed when hinge is bent, broken, or door sags. Direct fit replacement part.

White glass cooktop assembly for gas ranges. Replaces cracked, chipped, or broken glass cooking surface. Complete top panel with burner openings.

This replacement grate gog control fits atop the cooktop to secure and align the burner grate, restoring stable support for cookware and proper burner coverage. It helps maintain a level cooking surface and prevents grate movement during use. What it does:

• Replaces a worn, cracked, or missing control piece that allows the grate to seat correctly
• Stops grate wobble and shifting that can interfere with even heating or pot stability
• Restores correct spacing so burners operate without obstruction
• Useful when visual damage or loose fit is present

• One replacement grate gog control (gray)

• Designed for drop-in replacement; remove grate and seat new control in the same location
• Use care to avoid scratching the cooktop finish; gloves recommended
• Disconnect power to the appliance or ensure burners are cool before working near components

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Burner base that sits beneath the burner cap on your cooktop. Replace this component if damaged, cracked, or missing to restore your burner's appearance.

Burner base installs beneath the burner cap on gas cooktops. Replace if cracked, warped, or dome-shaped to restore proper flame coverage and alignment.

Replace a cracked or broken burner base on your cooktop. This 3-inch diameter base supports the burner cap and installs directly on the cooktop surface.

Approx 2 inches in diameter

Fix orange flames, carbon deposits, or uneven burner caps with a new burner head. Common fix for flame color issues. Straightforward replacement.

Approx 3-1/4 inches in diameter

Gray. Small. Used on the white model

Gray. Large. Used on the white model

Seals the cooktop to your range, preventing spills from entering the burner area. Replace if cracked, worn, or leaking. Verify fit with your model number.

Seals and cushions the edge of your range's glass or ceramic cooktop to keep out spills and reduce vibration. Replace if worn or damaged. Confirm fit.

Approx 4-1/4 inches in diameter

Color: Grey

Secures the burner cap to your range cooktop. Replace if loose, damaged, or causing uneven flames. Confirm fit with your model number before ordering.

Aluminum washer for range installation and assembly. Replaces worn, missing, or damaged washers in your range. Essential hardware component.

Color: White. Mounting screw for end caps.

Replace your range's interface wire harness if the original is damaged, frayed, or has broken connectors. This harness connects control components.

Interface harness wire assembly for ranges. Connects control components to electronic systems. Replace if damaged, frayed, or corroded wires affect connections.

Mounting screw for range installation and assembly. Replace missing, stripped, or damaged screws to secure panels, brackets, or components properly.

Silicon controlled rectifier for cooktop power control. Includes 8-32 mounting screw. Replace if damaged, corroded, or missing to restore proper installation.

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Replacement mounting screw for appliances. Secures components and reduces vibration. Needed when original screws are missing, stripped, or damaged.

Includes 12 washers.