Parts for Ge PGB960SEJ5SS: Control Panel Cooktop Parts

The KNOB ASSEMBLY is an OEM component specifically designed for GE gas ranges. It provides dual interfaces for operating individual burners through an integrated control knob and push button mechanism.  

Symptoms of a bad knob assembly include:

• Loose, difficult to turn, or unresponsive knob/button functions
• Worn graphics and identification labels around the assembly
• Failure to reliably switch burners on or off through pushing motions

Continuous high-heat cooking exposure can degrade the integrity of the assembly over time. Accidental impacts introduce a risk of cracked housings as well. Replacing it with this genuine GE part restores assured burner commands through an appearance-retaining operation.

This OEM GE replacement knob assembly is also compatible with some Kenmore and RCA gas cooktop models. Reliable indication and controls maximize usability cycle after cycle.
 

If your burner control knob is worn, broken, or won't turn smoothly, this control knob assembly restores precise heat adjustment. Simple pull-off replacement.

Stainless steel manifold panel for gas ranges. Front-facing component that holds control knobs. Replace if cracked, dented, or damaged. Restores appearance.

Replace a damaged center burner cap causing uneven flames or poor ignition. Restores flame distribution and protects the burner head on gas ranges.

Structural end support bracket for gas ranges. Replaces broken, cracked, or missing end support components. Essential for proper range stability and alignment.

End support bracket for gas ranges. Provides structural support at the end of the cooktop assembly. Replace if cracked, bent, or missing to restore stability.

This overlay and control assembly is the replaceable user-interface panel that houses the touchpad/buttons and supports the oven range control functions for accurate input and display. It restores responsive controls and clear button labels for reliable operation. What it does

• Replaces a worn, damaged, or non-responsive control overlay and button assembly
• Restores readable button labels, touch sensitivity, and user input for the range/oven
• Helps resolve symptoms like unresponsive keys, faded or cracked overlay, and incorrect or no control input
• Works with the existing control electronics to transmit user commands to the appliance

• One overlay and control assembly

• Disconnect power to the appliance before starting; verify power is off at the breaker
• Handle the assembly carefully to avoid scratching the overlay or damaging connector pins
• Access typically requires removing the control panel or back console—keep screws and retainers organized

Replacement grate assembly for gas range stovetops. Provides stable cooking surface over burners. Order if your existing grate is cracked, broken, or worn.

Replacement center burner grate for gas ranges. Restores a stable cooking surface over the middle burner when the original is cracked, worn, or missing.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

This backguard eyebrow is the top trim piece that finishes the range's control panel area, restoring appearance and protecting the backguard edge from spills and heat. It provides a clean factory look for worn or damaged trim. What it does:

• Covers and protects the upper edge of the range backguard and control area
• Restores a finished appearance when the original trim is dented, scratched, or missing
• Helps reduce buildup of grease at the top of the control panel
• Matches OEM fit and mounting points for a direct replacement

• One backguard eyebrow trim piece

• Remove power to the appliance before beginning service
• Basic hand tools typically required; handle trim carefully to avoid scratching finish
• Follow OEM instructions for proper alignment and secure mounting

Replacement control panel overlay for gas ranges. Restores the appearance of worn, faded, or damaged overlay graphics on your range's control panel.

Gas burner won't light evenly or flames are uneven? This burner cap end assembly ensures proper flame distribution. Common DIY repair for ranges.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

Fix uneven heating or burner not igniting with this dual burner and plate assembly. Direct-fit part for gas range repair. Moderate DIY installation.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

A replacement ground harness that restores the appliance's chassis grounding connection to help ensure safe electrical operation. Installs quickly to replace a damaged or corroded ground lead and reduce risk of arcing. What it does

• Provides the dedicated chassis ground connection between appliance wiring and the cabinet
• Restores proper grounding when original harness is broken, frayed, corroded, or detached
• Helps prevent intermittent power issues, arcing, or nuisance tripping caused by poor ground continuity
• Used wherever a short ground lead or bonded connector is required for safety

• One ground harness as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any repair
• Verify correct grounding point on the cabinet and secure the harness with the original screw or fastener
• Match connectors and routing to the original harness; avoid touching energized terminals during installation

Replacement mounting screw secures panels, brackets, and trim on ranges and cooktops. Install to replace missing, stripped, or rusted fasteners.

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Reversible griddle with smooth and ribbed surfaces for your gas range. Replace when worn or warped to restore even cooking. Confirm fit with your model.

Hex washer head screw for electric ranges. Secures panels, brackets, and internal components. Replace if screw is stripped, missing, or damaged.