Parts for Ge QGAS740RM3SS: Control Panel Cooktop Parts

Replacement control knob assembly for gas range burner and oven controls. Installs on the control panel. Needed when original knob is cracked, broken, or missing.

Replace your range's oven mode selector knob if cracked, broken, or missing. This control knob installs on the front panel to select cooking modes.

Broken or missing oven temperature knob? This thermostat knob assembly restores precise heat control. Simple grip-and-turn replacement part.

This manifold panel is the outer control housing that secures and protects the range/oven manifold and control components, restoring the unit's appearance and alignment for safe, reliable operation. What it does:

• Covers and supports the manifold and associated control components to keep them properly positioned
• Protects internal valve assemblies and wiring from dirt and incidental contact
• Restores proper fit and alignment of control knobs and trim after damage or wear
• Helps prevent further damage from loose or misaligned manifold components

• Turn off power and shut off gas supply before servicing; follow all safety procedures
• Remove trim, knobs, and any securing hardware to access the old panel
• Handle carefully to avoid scratching finish; align mounting holes before tightening fasteners

Clear plastic lens that covers and protects your cooktop's indicator light bulb from grease and spills. Replace if cracked, discolored, or missing.

Shoulder screw for ranges and ovens. Secures internal components and panels. Order a replacement if your original screw is stripped, missing, or damaged.

This electric thermostat regulates the temperature inside the oven by signaling the heating element to cycle on and off. It ensures the oven maintains the correct set temperature during cooking. Replace this part if the oven overheats, does not reach the desired temperature, or has inconsistent cooking results.

If your oven won't switch between bake, broil, or convection modes, the mode selector switch has likely failed. Moderate DIY repair in 30-45 minutes.

Replacement mounting screw that secures the thermostat assembly to your range cabinet. Replace if stripped, missing, or damaged during repair work.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

This seal valve keeps the refrigerator water valve properly sealed to help prevent leaks and water damage. It restores a tight seal where the valve connects to the water line or manifold for reliable dispenser and icemaker operation. What it does:

• Replaces a worn or damaged valve seal to stop water leaks at the water valve connection.
• Helps restore proper water flow control to the dispenser and icemaker when leaks or drips occur.
• Commonly used when you notice water leaking beneath or behind the fridge, puddles under the valve area, or reduced dispenser/ice performance linked to a leak.
• Works as the sealing component between the water valve and its fittings or tubing.

• One seal valve (single replacement seal)

• Disconnect power and shut off the water supply before beginning repairs.
• The valve and fittings are dry, then remove the old seal and install the new seal in the correct orientation.
• Check all tubing and connectors for damage and replace if necessary to ensure a reliable seal.
• After installation, restore water and power, then test the dispenser/icemaker and inspect for leaks.

Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.

Restores the finished rear appearance of your range and protects the wall from spills and grease. Replace when damaged or discolored. Verify fit with your model.

Fix a non-functioning clock or unresponsive control panel with this range timer clock and overlay assembly. Moderate difficulty repair for both gas and electric ranges.

If your gas range burners won't light or spark weakly, this electrode harness restores high-voltage delivery to ignitors for reliable ignition.

Replacement cooktop grate for gas ranges. Restores stable surface for pots and pans over burner. Needed when original is cracked, warped, or damaged.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Positions your range handle at the correct distance from the door. Replace if worn, missing, or cracked to restore proper alignment and prevent rattling.