Parts for Ge C2S985SET7SS: Control Panel & Cooktop Parts

If burners won't ignite automatically but light with a match, the spark module likely failed. Accessed from the back of the range, moderate difficulty.

Fix ignition clicking or burners that won't light with a new electrode harness. This high-voltage part connects ignition electrodes to your range's spark module. Moderate DIY repair, 30-45 minutes.

This is a black cast iron double burner grate that spans two burners on a gas range cooktop. It provides the support surface for pots and pans over the burner flames. Replace this grate if it is cracked, warped, has broken feet, or is rusted through, which can cause cookware to sit unevenly or wobble during use.

Replacement cooktop surface panel for your range. Installs as the main top surface surrounding burners. Needed when original is cracked, warped, or damaged.

Cast iron center grate for gas cooktops. Replaces damaged, cracked, or missing mid grate to restore stable cookware support over the center burner.

Pin locator for gas ranges. Secures and aligns burner components in proper position. Replace if broken, missing, or worn to restore proper burner assembly.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

Secures cooktop panels, brackets, and components on your gas range. Replace missing, stripped, or damaged screws to eliminate rattles and restore alignment.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap sits atop the burner base on gas ranges and cooktops. Replace if cracked, chipped, discolored, or missing to restore a clean appearance.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Central burner cap for gas cooktops. Covers the center of the burner to shape flame and protect the burner head. Replace if cracked, worn, or missing.

Replacement small surface burner for gas ranges and cooktops. Installs on stovetop to provide heat for smaller pots. Replace if damaged, discolored, or missing.

The Vision Burner XL is an OEM part for GE ranges. It is a large burner designed to provide high heat output for tasks that require intense cooking temperatures, such as boiling large pots of water or rapid heating. This burner ensures efficient and powerful cooking performance.

Causes of a bad Vision Burner XL can include wear and tear from frequent use, exposure to high temperatures, or damage due to impact or spills. Electrical issues can also lead to malfunctioning.

Symptoms of a bad Vision Burner XL include:

• The burner not igniting
• Uneven flame or weak flame
• The burner not maintaining a steady flame
• Visible damage or corrosion on the burner

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Tri-Ring Burner Assembly is an OEM part for GE gas cooktops and ranges. It contains the three front right burners, grates, and supporting brackets.

Causes of a bad burner assembly can include cracked or warped burner heads from prolonged heat exposure. Deterioration of internal gas pipes and orifices may also diminish flame and heating performance.

Symptoms of a bad Tri-Ring Assembly include:

• Unstable, yellowish, or excessively large flames that cannot be adjusted
• Burners that cannot be ignited or controlled independently
• Improper alignment causing imbalanced pans or spills
• Leakage or gas smells detected around the burner cavities

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore branded appliances.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

The Medium Surface Burner is an OEM part for GE ranges and cooktops. This burner is essential for a wide range of cooking tasks, from simmering sauces to sautéing vegetables. The medium surface burner ensures even heat distribution and efficient fuel consumption, contributing to the overall cooking performance of your appliance.

Causes of a bad Medium Surface Burner can range from clogged burner ports, which impede gas flow and affect flame consistency, to wear and tear on the igniter or the burner assembly that prevents proper operation.

Symptoms of a malfunctioning Medium Surface Burner include:

• Inconsistent flame size or failure to ignite
• Uneven heating or hot spots on the cookware
• Visible damage or corrosion on the burner itself

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Secures range panels, brackets, and internal components. Replace this trilobular screw if the original is missing, stripped, or damaged to restore proper fit.

Outer burner cap for sealed gas cooktop burners. Shapes flame distribution around the outer ring. Replace if cracked, warped, or missing.

Secures the ignition electrode on gas range burners. Replace if burners won't spark, igniter clicks continuously, or clip is corroded or loose. Confirm fit with your model number.

This tube delivers liquid propane gas from the valve to the 15,000 BTU burner on your range. Located beneath the cooktop connecting the gas valve to the burner assembly, it needs replacement when you experience uneven flames, gas odors, or the burner fails to ignite properly.

The Bumper is an OEM part for GE ranges. It is located on the sides of the oven drawer and serves as a cushion to prevent noise, vibration, and wear. As time goes on, regular use of the appliance can cause it to become damaged or worn out.

Causes of a bad bumper can include wear and tear from regular use, deterioration of the material over time, or damage from excessive force when closing the door.

Symptoms of a bad Bumper include:

• Excessive noise
• Difficulty in sliding the drawer
• Misalignment
• Wear, and increased friction

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement cooktop griddle restores a flat, stable cooking surface over the designated burner(s) on your range. Replace a warped, cracked, or missing griddle to maintain proper fit, safe handling, and consistent results.

• Provides a level, wide cooking surface for griddling on the cooktop
• Rests on the cooktop supports over the appropriate burner(s)
• Replace if the original is warped, cracked, chipped, or will not sit flat
• Helps restore even contact with heat and stable placement

What's included: 1 griddle

• Allow the cooktop and griddle to cool completely; wear gloves when handling
• Remove grates or the old griddle and clean the support area before placement
• Position the griddle on the designated location; align feet/tabs so it sits flush and does not rock
• Verify stability before heating; follow your range's use and care manual

If your range hood fan isn't working or makes loud noises, the vent motor may need replacement. Moderate DIY repair restores proper ventilation.