Parts for Ge C2S986SEL2SS: Control Panel & Cooktop Parts

The Ss Cntrl Knob is an OEM replacement part for stainless steel GE ranges. Each individual knob operates the corresponding burner, allowing for precise temperature and heat level selections.

Causes of a bad knob can include normal wear and tea

Manifold panel for ranges. Covers and protects the gas manifold assembly. Replace if cracked, damaged, or missing to restore proper appearance.

Fix continuous clicking or no-spark burners with this gas range spark igniter module. Restores reliable ignition when burners won't light properly.

This cooktop grate sits over your gas range burners to support cookware and distribute heat evenly. Replace if cracked, broken, or missing hardware.

Replace your damaged or worn gas range cooktop surface. This top assembly covers the burner area and completes the appearance of your range.

Center grate for gas ranges that sits above the middle burner. Replace if cracked, warped, or damaged to restore proper cookware support.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, p

Trim kit for gas ranges. Installs around cooktop or control panel to cover gaps and provide a finished appearance. Replace if cracked or missing.

Stainless steel #8-18 x 3/8" screw secures panels, brackets, and components in ranges, cooktops, and ovens. Replace if stripped, missing, or corroded.

This mounting bracket secures internal components or panels to the appliance frame, restoring proper alignment and stability. It's a simple replacement that helps stop rattling and keeps parts held in place during normal use. What it does:

• Provides a solid attachment point for interior panels, assemblies, or trim
• Prevents loosening, vibration, and noise caused by a missing or broken bracket
• Helps maintain correct alignment of nearby components for reliable operation
• Works as a direct-fit OEM replacement when the original bracket is damaged or worn

• One mounting bracket

• Disconnect power and water before starting any repair
• Support panels or assemblies while removing fasteners to avoid drops or damage
• Use appropriate hand tools; avoid overtightening fasteners to prevent stripping
• Refer to the parts diagram for correct placement and fastener locations

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and c

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a

Replacement burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift d

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

The Burner, Large V2 is an OEM part for GE gas ranges. It is designed to provide a consistent and even flame for cooking, ensuring efficient heat distribution for large pots and pans.

Causes of a bad burner can include clogging from food spills

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Fixes electrical shocks or arcing from your range. This grounding harness restores the safe earth ground connection between chassis and outlet. Easy install.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Stainless steel griddle control knob for gas ranges. Replaces cracked, worn, or missing knobs to restore proper grip, alignment, and control.

If your burner knob is worn, cracked, or missing and you can't control heat levels, this surface burner control knob restores reliable operation.

Cast iron griddle for gas ranges. Sits on top of burner grates for additional cooking surface. Replace if cracked, warped, or rusted. Durable construction.

Replace the vent trim on your gas range. This decorative trim piece surrounds the vent opening and may need replacement if cracked, discolored, or damaged.