Parts for Ge C2S986SEL2SS: Door & Drawer Parts

The Fastener Door Handle is an OEM component for GE refrigerators. This door handle provides a comfortable grip for accessing refrigerator shelves and bins. It attaches securely to the refrigerator door through durable metal fasteners. 

Causes for a bad door handle could be cracks, damage, or stripped fastener holes resulting in a loose or detached handle. Regularly gripping and lifting may also cause normal wear over time.

Symptoms of a failing door handle include:

• The handle detaching completely from the door  
• Looseness making the handle wobbly or unstable to hold
• Sharp edges or broken parts posing a safety risk

This OEM GE handle is also compatible with Hotpoint, RCA, and select Kenmore refrigerator models.

This 10-32 machine screw secures brackets, panels, and other hardware in cooking appliances. Replacing a missing or stripped screw restores a snug, rattle-free fit and keeps components aligned and safely fastened. What it does:

• Fastens panels, brackets, and components using a 10-32 machine thread
• Replaces hardware that is missing, rusted, or stripped
• Helps address loose or rattling parts and minor panel misalignment
• Maintains secure mounting after service or part replacement

• One 10-32 machine screw

• Disconnect power; for gas appliances, also shut off gas before service
• Support the panel or bracket while removing/installing hardware
• Start threads by hand to avoid cross-threading; do not overtighten
• Replace them one at a time to keep alignment

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

Replacement door hinge designed to restore proper door alignment and smooth pivoting on compatible refrigerators. Helps stop door sagging, rubbing, and gaps to maintain an even seal and reliable cooling. What it does:

• Supports the door and provides a stable pivot point for opening and closing.
• Restores correct door alignment to prevent rubbing, uneven gaps, and seal failures.
• Commonly used when a door sags, sticks, hangs unevenly, or no longer seals properly.

• Basic hand tools (screwdriver, socket/wrench) are typically required; follow manufacturer instructions for your model.
• Support the door before removing the old hinge — heavy doors may require a second person or a support block.
• Disconnect power or unplug the appliance if working near electrical components; wear gloves and eye protection and check door alignment and seal after installation.

This upper door hinge supports the refrigerator door and restores proper door alignment for smooth opening and closing. Durable hinge pivots the door and helps maintain a secure seal to keep cool air inside. What it does:

• Provides a stable pivot point so the door opens and closes smoothly
• Keeps the door aligned to prevent rubbing, gaps, or uneven sealing
• Helps stop door sag, drooping or scraping against the cabinet
• Reduces abnormal noise or binding from a worn hinge

• One upper door hinge

• Unplug the appliance or switch off power before starting work
• Remove food and shelves as needed to reduce weight on the door
• Support the door during removal/installation to avoid injury or damage
• Tighten mounting screws securely and check door alignment after installation

This bake element heats the oven cavity so food cooks evenly on bake settings. It replaces a failed or damaged element to restore proper baking performance and clear heating issues. What it does:

• Heats the bottom of the oven for bake cycles
• Replaces elements that are broken, visibly burnt, or not producing heat
• Helps resolve uneven cooking, no-heat on bake, or error codes related to open elements
• Works with matched oven control settings to maintain set temperatures

• One bake/heating element

• Disconnect power to the appliance before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Verify electrical connections are tight and secure; replace mounting screws if worn

Left hand side

Right hand side

This replacement oven door window glass restores clear viewing into the oven and helps keep the door assembly performing as designed. Replace when the original pane is cracked, shattered, or permanently stained.

• Clear glass pane used in the oven door window assembly
• Lets you check food without opening the door
• Contributes to proper heat retention as part of the multi-pane door design
• Common failure signs: cracked/shattered glass, loose or rattling window, visibility obscured by damage

• Disconnect power at the breaker or unplug; shut off gas for gas ranges. Allow the oven to cool completely.
• Wear cut-resistant gloves and eye protection; handle glass carefully to avoid injury.
• Access typically requires removing the door and separating inner/outer panels; keep screws organized by location.
• Reinstall any spacers/seals in their original positions and avoid overtightening fasteners against glass.

This liner door weld assembly replaces the damaged or separated inner door liner to restore door strength and alignment. It provides a solid mounting surface and helps the door close properly for reliable operation. What it does:

• Replaces cracked, bent, or separated inner door liner caused by impact or wear
• Restores structural support and mounting points for door components
• Helps eliminate gaps, rattles, or misalignment that can affect door closure
• Returns the door to its intended shape so seals and latches engage correctly

• One liner door weld assembly

• Disconnect power to the appliance before starting any repair
• Handle sharp sheet-metal edges with care and wear gloves and eye protection
• May require partial door disassembly and common hand tools; follow the OEM service instructions

This drawer bracket secures and supports a refrigerator/ freezer drawer, restoring proper alignment and load-bearing at the front or side mounting point. It's a simple replacement that helps the drawer open and close smoothly. What it does:

• Holds and supports the drawer to prevent sagging or tipping under normal loads
• Keeps the drawer aligned on its track for smooth operation
• Restores proper engagement with the cabinet so the drawer seats and latches correctly
• Helps prevent binding, catching, or uneven gaps when opening or closing

• Disconnect power to the appliance before servicing and work with the drawer empty.
• Remove the drawer and any trim as needed to access the bracket; use appropriate hand tools (screwdriver/socket) for fasteners.
• Reuse existing screws only if undamaged; replace fasteners if stripped or corroded.
• Align the bracket carefully before tightening to avoid binding; do not force or overtighten plastic components.

This barrier door restores the dryer's internal airflow path to help block backflow and direct exhaust air for proper drying performance. Replaces a damaged or stuck door that can interfere with venting. What it does

• Seals the dryer exhaust path to prevent air from flowing the wrong way.
• Helps maintain proper airflow so clothes dry more efficiently.
• Reduces the chance of lint or debris moving back into the drum area.
• Can stop rattling or scraping noises caused by a broken or loose door.

• One barrier door

• Disconnect power to the appliance before starting any repair.
• Remove the dryer front or lint-trap assembly as needed to access and replace the barrier door.
• Keep fasteners and mounting orientation the same; secure all screws and clips firmly.

This fastener bracket secures appliance panels and components to maintain proper alignment and reduce vibration. A simple replacement that restores secure mounting and helps prevent noise or loose parts. What it does:

• Holds panels or assemblies in place to prevent movement during operation
• Restores proper alignment for doors, trim, or internal components
• Reduces rattling and vibration caused by worn or broken brackets
• Works as a direct-fit replacement for the listed part number

• Inspect surrounding clips and screws; replace any damaged fasteners for a secure fit
• Turn off and unplug the appliance before attempting repairs
• Use appropriate hand tools; avoid overtightening to prevent damage

This fastener bracket secures internal panels or components so they stay properly aligned and stable during normal appliance use. It restores correct mounting where a worn or broken bracket causes loose or misaligned parts. What it does:

• Provides a secure mounting point for panels or assemblies to prevent movement and vibration
• Replaces a damaged or missing bracket that can cause rattling, sagging, or loose trim
• Helps maintain proper alignment of nearby parts for reliable operation
• Fits where a small stamped/formed bracket is required to fasten components

• Designed for direct replacement; verify bracket orientation before fastening
• Use appropriate fasteners and torque to avoid stripping or distortion
• Disconnect power and follow appliance manufacturer safety guidance before beginning repairs

Size: 10-32 GXTT FLP.595 S

The Badge Assembly is an OEM part for GE ranges. It includes the magnetic decorative badge affixed to the front of the range. This badge displays important information such as the brand name, model number, and technical specifications.

Causes of a bad badge assembly can include damage from impacts or abrasions over time, adhesive failure from repeated heat exposure, or normal wear from routine cleaning. On a range, the badge must withstand higher cooking temperatures.

Symptoms of a bad badge assembly include:

• Faded or illegible print on the badge face
• Cracks or breaks in the plastic material
• The badge lifting or peeling away from the surface
• Missing or loose attachment clips/fasteners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.