Parts for Ge CES700P4M3W2: Control Panel & Cooktop Parts

This rangetop and glass assembly replaces the complete cooking surface on your range. It restores a smooth, level top and helps protect internal components when the original glass is cracked, shattered, or excessively worn. What it does:

• Forms the upper cooking surface and supports top-side components
• Helps contain spills and shields components below from debris and heat
• Maintains proper alignment for control and burner/element openings
• Replace if the glass is cracked, shattered, deeply scratched, chipped, or mounting points are damaged

• 1 rangetop and glass assembly

• Disconnect power; shut off the gas supply and allow the appliance to cool completely
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Transfer any attached components and hardware from the old top to the new assembly as required by your model's service information
• After reassembly, restore utilities and test; check all connections for leaks using an approved method

This hot surface indicator is the replacement indicator light that shows when an electric cooktop surface is still hot, helping prevent accidental burns and improving user awareness after cooking. Fits select electric ranges and cooktops. What it does:

• Illuminates when a cooktop heating element or radiant surface remains hot after use
• Signals residual heat even if the element is off, reducing burn risk
• Replaces a cracked, non-lighting, or intermittently working indicator light
• Works with the range/cooktop's surface control circuitry to display status

• Disconnect power to the appliance at the breaker before beginning any work
• Replacement typically involves removing the cooktop glass or control panel
• Handle the indicator and surrounding glass carefully to avoid damage or misalignment

This indicator sleeve is a small control-knob marker that restores a clear position marker and snug fit on the control shaft for reliable setting selection. It improves dial visibility and stabilizes the knob during use. What it does:

• Covers and centers the control shaft so the knob sits straight and turns smoothly
• Provides a visible pointer for selecting temperature or power settings
• Replaces cracked, worn or missing sleeves that make knob position hard to read
• Helps eliminate wobble or looseness between the knob and control shaft

• One indicator sleeve

• Disconnect power to the appliance before servicing
• Remove the control knob (pull straight off) to access the sleeve
• Press the sleeve onto the shaft by hand until fully seated; no special tools generally required
• If the knob or shaft is damaged, inspect and replace as needed for secure fit

The Range Radiant Element is an OEM replacement part for GE ranges. This 5.5-inch element is situated beneath the glass surface of the electric stovetop. It's designed for tasks that require less surface area but still need quick and even heating, such as simmering sauces or cooking smaller portions of food.

Causes for a malfunctioning Range Radiant Element can include electrical issues like faulty wiring or connections, physical damage from spills or heavy cookware, or wear and tear from regular use.

Symptoms of a bad Range Radiant Element include:

• The element failing to heat up or heating unevenly
• Visible damage such as cracks or burns on the element
• Difficulty in maintaining a consistent temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Element Radiant 6 Warmer is an OEM component specifically designed for GE electric ranges. This element plays an important role in warming plates and keeping cooked foods hot until serving. 

Symptoms of a bad radiant warmer element include:

• Inability to maintain an elevated temperature on the warmer oven surface 
• Fluctuating or uncontrolled warming temperatures
• Burning or scorching of foods left on the warmer for extended periods

Causes of failure can be cracking or breakage of the heating coils over time, insulation damage allowing shorts or arcing, or issues with the electronic temperature controls. 

This OEM GE replacement element is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.  

Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits. 

Symptoms of a bad Triple Haliant Element include:

• The element does not heat up
• Only parts of the element heat up
• Unusual fluctuations in heat levels

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This dual radiant surface element sits beneath the glass cooktop and provides two heating zones to match your pan size. Replacing a failed element restores fast, even heating and proper control on the affected burner.

• Heats cookware via two concentric radiant circuits beneath the glass-ceramic surface
• Lets you select inner, outer, or both rings for small or large pans (via the burner control)
• Cycles with its internal limiter to maintain the temperature you set
• Common symptoms: no heat, only one ring heats, uneven or slow heating

• Disconnect power at the breaker before servicing
• Lift/remove the glass cooktop to access elements; support the glass to prevent stress or cracks
• Transfer wiring and any mounting brackets from the old element to the new one, moving one connection at a time and documenting positions
• Test the burner for proper operation before reassembly

This seal valve creates a watertight seal inside the appliance valve assembly to help prevent leaks and ensure proper water routing. Replace a worn or cracked seal to stop drips and protect surrounding components from water damage. What it does

• Seals the valve assembly to prevent water leakage at valve connections
• Helps maintain correct water flow through the valve body
• Commonly replaced when you see leaking, dripping, or water pooling under the appliance

• One seal valve

• Disconnect power and shut off the water supply before starting work
• Only install in a clean, dry valve area; replace any damaged valve parts discovered during service
• Use appropriate tools and follow OEM instructions for valve disassembly/reassembly

This replacement lens is the interior light cover that protects and diffuses the appliance light so you can see the cavity clearly while shielding the bulb from spills and debris. It restores proper light diffusion and protection after damage or loss. What it does:

• Covers and protects the interior light bulb from food, grease, and impact
• Diffuses light for more even interior illumination
• Helps prevent direct contact with the hot bulb for safer operation
• Restores appearance when the original lens is cracked, chipped, or missing

• One replacement lens

• Disconnect power to the appliance before starting work to prevent electrical shock.
• Allow the bulb to cool completely before removing or installing the lens to avoid burns or breakage.
• Handle the lens carefully—use gloves to protect hands and prevent fingerprints on clear surfaces.
• Follow the appliance owner's manual for lens removal/installation steps; do not force or overtighten.

This pilot indicator light mounts in the control panel and illuminates to show when a surface element or another heating circuit is powered. Replace a burned-out or stuck-on light to restore a clear, reliable power-on warning.

• Lights when the corresponding heating circuit is energized
• Alerts users that heating components are active
• Common symptoms: light does not turn on, stays on constantly, flickers, or is very dim
• Shows physical damage to the lens or terminals when failed

• Disconnect power at the breaker before servicing
• Remove the backguard or control panel cover to access the indicator light from behind
• Note wire positions; move connectors to the new light one at a time and secure the light in the panel
• Restore power and test operation before reassembly

This is a stainless-steel machine screw used to secure components in appliances. Its #8-18 thread and 3/8" length provide a reliable, corrosion-resistant fastening where a short machine screw is required. What it does:

• Fastens panels, brackets, or small assemblies with a #8-18 threaded hole
• Resists rust and corrosion in humid appliance compartments
• Provides a short, secure hold where space is limited
• Compatible with standard #2 Phillips or compatible driver bit for installation

• Power off and unplug the appliance before servicing
• Use the correct driver to avoid stripping the head
• Do not overtighten; stop when snug to avoid thread or component damage
• If replacing multiple fasteners, reuse only the same size and type

This glass and touch board assembly replaces the front control surface and touch-sensitive electronics on your range or oven, restoring responsive controls and a clean, uncracked appearance. Ideal when the control glass is damaged or the touch keys fail. What it does:

• Replaces the glass control surface and the integrated touch-control circuitry for user input
• Restores responsive touch keys, selector pads, and related control inputs
• Helps clear visual damage like cracked or scratched control glass that interferes operation
• Addresses intermittent or unresponsive control panel behavior tied to the touch board

• One glass and touch board assembly

• Disconnect power to the appliance at the breaker before beginning work to avoid shock
• Handle the glass carefully to avoid chipping; support the assembly while removing or installing
• Installation typically requires removing the control console; keep screws and brackets organized

This fastener nut secures appliance components and wiring connections to keep assemblies stable and aligned during normal operation. It's a small replacement part that restores proper fastening where the original nut is missing, stripped, or damaged. What it does:

• Secures mounting studs, terminals, or brackets to prevent parts from coming loose
• Restores a solid mechanical and electrical connection where a worn or missing nut causes poor contact
• Helps stop vibration-related noise or movement from loose assemblies
• Used wherever a matching threaded stud or bolt requires a retained fastener

• One replacement nut (quantity: 1)

• Disconnect power and water before servicing the appliance
• Start threads by hand to avoid cross-threading; then tighten with the correct size wrench or socket
• Tighten securely but do not overtighten—over-torquing can strip threads or damage components
• Replace if threads are damaged, corroded, or if the nut no longer holds securely

This replacement switch assembly restores control of the appliance's heating or power circuit, letting a specific function respond correctly when selected. Designed as a direct-fit service part to replace a worn or failed switch. What it does

• Completes or interrupts the electrical circuit to the targeted heating or control function.
• Restores reliable on/off or stepped control when the original switch is worn or intermittent.
• Helps resolve symptoms such as no power to the element/function, intermittent operation, or inability to change settings.
• Matches OEM mounting and terminal layout for straightforward replacement.

• One switch assembly as shown

• Disconnect power to the appliance at the breaker or unplug before starting work.
• Verify exact terminal layout and orientation before removing the old switch; take a photo for reference.
• Use insulated tools and avoid touching live terminals; replace any damaged wiring or connectors.
• After installation, restore power and verify proper operation of the function controlled by the switch.

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

The Front Gasket Assembly is an OEM replacement part for GE electric ranges. As the seal between the range body and control panel, the front gasket plays a critical role in containing heat and preventing spills from entering internal components.  

Symptoms of a bad front gasket include:

• Excess heat visible escaping around the control panel 
• Drips or spills entering behind the control panel
• Visible cracks, splits, or openings in the gasket seal

Causes of a bad gasket can be normal wear from repeated cleaning and high-heat cooking. Hard impacts or forced openings may also damage the integrity of the seal over time.

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore electric ranges.

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Cooling Fan Sensor is an OEM replacement part for GE ovens and ranges. It is a critical component that monitors and regulates the operation of the cooling fan, ensuring proper ventilation and temperature control within the appliance.

Symptoms of a bad cooling fan sensor:

• Overheating issues, with the oven or range becoming excessively hot
• Failure of the cooling fan to turn on or operate correctly
• Error codes or warning lights related to temperature or ventilation problems
• Potential safety hazards due to inadequate cooling and heat buildup

Causes of a faulty cooling fan sensor can include exposure to high temperatures over time, electrical malfunctions, or physical damage to the sensor or its wiring.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ovens and ranges.

This tangential blower circulates air across oven/microwave components to help cool electronics and maintain proper airflow. Replaces a worn or failed blower to restore cooling and reduce overheating risks. What it does:

• Moves air along the appliance's internal components to help dissipate heat
• Helps prevent overheating of control electronics and nearby parts
• Can stop whining or rattling noises when a worn fan is replaced

• One tangential blower assembly

• Disconnect power to the appliance before starting any repair
• Follow the appliance manufacturer's service instructions and wiring diagrams
• Handle with care around sharp sheet metal and fragile components