Parts for Ge CES750P4M2W2: Control Panel & Cooktop Parts

This rangetop and glass assembly replaces the complete cooking surface on your range. It restores a smooth, level top and helps protect internal components when the original glass is cracked, shattered, or excessively worn. What it does:

• Forms the upper cooking surface and supports top-side components
• Helps contain spills and shields components below from debris and heat
• Maintains proper alignment for control and burner/element openings
• Replace if the glass is cracked, shattered, deeply scratched, chipped, or mounting points are damaged

• 1 rangetop and glass assembly

• Disconnect power; shut off the gas supply and allow the appliance to cool completely
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Transfer any attached components and hardware from the old top to the new assembly as required by your model's service information
• After reassembly, restore utilities and test; check all connections for leaks using an approved method

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

This hot surface indicator is the replacement indicator light that shows when an electric cooktop surface is still hot, helping prevent accidental burns and improving user awareness after cooking. Fits select electric ranges and cooktops. What it does:

• Illuminates when a cooktop heating element or radiant surface remains hot after use
• Signals residual heat even if the element is off, reducing burn risk
• Replaces a cracked, non-lighting, or intermittently working indicator light
• Works with the range/cooktop's surface control circuitry to display status

• Disconnect power to the appliance at the breaker before beginning any work
• Replacement typically involves removing the cooktop glass or control panel
• Handle the indicator and surrounding glass carefully to avoid damage or misalignment

This indicator sleeve is a small control-knob marker that restores a clear position marker and snug fit on the control shaft for reliable setting selection. It improves dial visibility and stabilizes the knob during use. What it does:

• Covers and centers the control shaft so the knob sits straight and turns smoothly
• Provides a visible pointer for selecting temperature or power settings
• Replaces cracked, worn or missing sleeves that make knob position hard to read
• Helps eliminate wobble or looseness between the knob and control shaft

• One indicator sleeve

• Disconnect power to the appliance before servicing
• Remove the control knob (pull straight off) to access the sleeve
• Press the sleeve onto the shaft by hand until fully seated; no special tools generally required
• If the knob or shaft is damaged, inspect and replace as needed for secure fit

The Range Radiant Element is an OEM replacement part for GE ranges. This 5.5-inch element is situated beneath the glass surface of the electric stovetop. It's designed for tasks that require less surface area but still need quick and even heating, such as simmering sauces or cooking smaller portions of food.

Causes for a malfunctioning Range Radiant Element can include electrical issues like faulty wiring or connections, physical damage from spills or heavy cookware, or wear and tear from regular use.

Symptoms of a bad Range Radiant Element include:

• The element failing to heat up or heating unevenly
• Visible damage such as cracks or burns on the element
• Difficulty in maintaining a consistent temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Element Radiant 6 Warmer is an OEM component specifically designed for GE electric ranges. This element plays an important role in warming plates and keeping cooked foods hot until serving. 

Symptoms of a bad radiant warmer element include:

• Inability to maintain an elevated temperature on the warmer oven surface 
• Fluctuating or uncontrolled warming temperatures
• Burning or scorching of foods left on the warmer for extended periods

Causes of failure can be cracking or breakage of the heating coils over time, insulation damage allowing shorts or arcing, or issues with the electronic temperature controls. 

This OEM GE replacement element is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Triple Haliant Element is an OEM part for GE cooktops and ranges, designed to provide versatile and powerful heating options. This element features a triple-ring design that allows for three different sizes of cookware to be heated efficiently on the same burner. It's ideal for situations requiring precise temperature control and flexibility, such as when cooking with large pots or pans that need even heat distribution.  

Causes for a Triple Haliant Element to fail can include prolonged use leading to wear and tear, overheating that damages the internal components, or electrical issues such as short circuits. 

Symptoms of a bad Triple Haliant Element include:

• The element does not heat up
• Only parts of the element heat up
• Unusual fluctuations in heat levels

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

This dual radiant surface element sits beneath the glass cooktop and provides two heating zones to match your pan size. Replacing a failed element restores fast, even heating and proper control on the affected burner.

• Heats cookware via two concentric radiant circuits beneath the glass-ceramic surface
• Lets you select inner, outer, or both rings for small or large pans (via the burner control)
• Cycles with its internal limiter to maintain the temperature you set
• Common symptoms: no heat, only one ring heats, uneven or slow heating

• Disconnect power at the breaker before servicing
• Lift/remove the glass cooktop to access elements; support the glass to prevent stress or cracks
• Transfer wiring and any mounting brackets from the old element to the new one, moving one connection at a time and documenting positions
• Test the burner for proper operation before reassembly

The Radiant Element Spring is an OEM part for GE electric ranges. This spring supports the radiant element coil and provides the necessary tension to allow the coil to glow red-hot during the cooking process.

Causes of a bad spring can include fatigue from repeated heating and cooling cycles, damage due to impact or mishandling, or corrosion over extended use.

Symptoms of a bad radiant element spring include:

• Radiant element coil sagging or not sitting flush
• Element coil not heating properly or heating unevenly
• Excessive heat and energy use from a misaligned coil
• Element mounting brackets becoming loose over time

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This seal valve creates a watertight seal inside the appliance valve assembly to help prevent leaks and ensure proper water routing. Replace a worn or cracked seal to stop drips and protect surrounding components from water damage. What it does

• Seals the valve assembly to prevent water leakage at valve connections
• Helps maintain correct water flow through the valve body
• Commonly replaced when you see leaking, dripping, or water pooling under the appliance

• One seal valve

• Disconnect power and shut off the water supply before starting work
• Only install in a clean, dry valve area; replace any damaged valve parts discovered during service
• Use appropriate tools and follow OEM instructions for valve disassembly/reassembly

This replacement lens is the interior light cover that protects and diffuses the appliance light so you can see the cavity clearly while shielding the bulb from spills and debris. It restores proper light diffusion and protection after damage or loss. What it does:

• Covers and protects the interior light bulb from food, grease, and impact
• Diffuses light for more even interior illumination
• Helps prevent direct contact with the hot bulb for safer operation
• Restores appearance when the original lens is cracked, chipped, or missing

• One replacement lens

• Disconnect power to the appliance before starting work to prevent electrical shock.
• Allow the bulb to cool completely before removing or installing the lens to avoid burns or breakage.
• Handle the lens carefully—use gloves to protect hands and prevent fingerprints on clear surfaces.
• Follow the appliance owner's manual for lens removal/installation steps; do not force or overtighten.

This pilot indicator light mounts in the control panel and illuminates to show when a surface element or another heating circuit is powered. Replace a burned-out or stuck-on light to restore a clear, reliable power-on warning.

• Lights when the corresponding heating circuit is energized
• Alerts users that heating components are active
• Common symptoms: light does not turn on, stays on constantly, flickers, or is very dim
• Shows physical damage to the lens or terminals when failed

• Disconnect power at the breaker before servicing
• Remove the backguard or control panel cover to access the indicator light from behind
• Note wire positions; move connectors to the new light one at a time and secure the light in the panel
• Restore power and test operation before reassembly

This glass and touch control board assembly replaces the cooktop/oven front control surface and electronic touch interface to restore a working display and touch response. Fits select GE ranges and wall ovens where the glass/control module is damaged or unresponsive. What it does:

• Provides the glass touch surface and underlying control electronics used to set temperatures, timers, and cooking modes
• Restores unresponsive touch buttons, missing characters on the display, or intermittent control behavior
• Replaces cracked or scratched glass to improve usability and appearance
• Works with the appliance's existing wiring harness and mounting points to regain full panel functionality

• One glass and touch control board assembly as shown

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Handle the glass and circuit board carefully to avoid damage from dropping or static discharge
• Basic panel removal required; keep all screws and trim pieces organized for reassembly

This fastener nut secures appliance components and wiring connections to keep assemblies stable and aligned during normal operation. It's a small replacement part that restores proper fastening where the original nut is missing, stripped, or damaged. What it does:

• Secures mounting studs, terminals, or brackets to prevent parts from coming loose
• Restores a solid mechanical and electrical connection where a worn or missing nut causes poor contact
• Helps stop vibration-related noise or movement from loose assemblies
• Used wherever a matching threaded stud or bolt requires a retained fastener

• One replacement nut (quantity: 1)

• Disconnect power and water before servicing the appliance
• Start threads by hand to avoid cross-threading; then tighten with the correct size wrench or socket
• Tighten securely but do not overtighten—over-torquing can strip threads or damage components
• Replace if threads are damaged, corroded, or if the nut no longer holds securely

This replacement switch assembly restores control of the appliance's heating or power circuit, letting a specific function respond correctly when selected. Designed as a direct-fit service part to replace a worn or failed switch. What it does

• Completes or interrupts the electrical circuit to the targeted heating or control function.
• Restores reliable on/off or stepped control when the original switch is worn or intermittent.
• Helps resolve symptoms such as no power to the element/function, intermittent operation, or inability to change settings.
• Matches OEM mounting and terminal layout for straightforward replacement.

• One switch assembly as shown

• Disconnect power to the appliance at the breaker or unplug before starting work.
• Verify exact terminal layout and orientation before removing the old switch; take a photo for reference.
• Use insulated tools and avoid touching live terminals; replace any damaged wiring or connectors.
• After installation, restore power and verify proper operation of the function controlled by the switch.

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

The Front Gasket Assembly is an OEM replacement part for GE electric ranges. As the seal between the range body and control panel, the front gasket plays a critical role in containing heat and preventing spills from entering internal components.  

Symptoms of a bad front gasket include:

• Excess heat visible escaping around the control panel 
• Drips or spills entering behind the control panel
• Visible cracks, splits, or openings in the gasket seal

Causes of a bad gasket can be normal wear from repeated cleaning and high-heat cooking. Hard impacts or forced openings may also damage the integrity of the seal over time.

This OEM GE part is also compatible with Hotpoint, RCA, and select Kenmore electric ranges.

Size: 10-32 GXTT FLP.595 S