Parts for Ge CGP95363M1S2: Control Panel & Cooktop Parts

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Pilot indicator light mounts in the control panel and illuminates when a surface element or heating circuit is powered. Replace if burned out or stuck on.

Clear plastic lens that covers and protects your cooktop's indicator light bulb from grease and spills. Replace if cracked, discolored, or missing.

The Bridge Bumper is an OEM part for GE electric cooktops. It is a protective bumper located at the bridge that connects the front control panel area to the cooking surface. The bumper acts as a safeguard, cushioning any potential impact to the underside of the control panel. 

Causes of a bad bridge bumper include normal wear and tear, exposure to heat or moisture during cooking, or tears from impact. 

Symptoms of a bad bridge bumper include:

• Visible damage or deterioration of the bumper material  
• Exposure of raw edges that were previously covered
• Increased risk of scratches or damage to the control panel surface

This GE replacement part is also compatible with some Hotpoint, General Electric, and Kenmore electric cooktop models. Protect your appliance with this genuine OEM bridge bumper to safeguard the control panel from accidental impact.
 

This is a 36" stainless maintop assembly for select gas/slide-in ranges — the finished cooktop surface that supports burners and grates and restores a clean, flush appearance. Replaces a dented, rusted, or warped top. What it does

• Provides the finished cooktop surface and mounting area for burners, burner bowls, and grates.
• Restores proper fit and alignment when the factory top is dented, bent, or corroded.
• Helps prevent heat and spill damage to underlying components by providing the correct barrier and contour.
• Returns the range to a safe, even cooking surface and improves appearance.

• One 36" stainless maintop assembly (single piece as listed)

• Disconnect power and gas supply before starting any repair.
• Remove burner grates, burner caps, and any control panel trim as needed to access mounting fasteners.
• Larger maintops may require two people to lift and position safely.
• Do not force or bend the part during installation.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated or cracked porcelain-enamel exterior
• Warped or misshapen burner base that no longer sits flat
• Cookware that rocks or is unstable when placed on the burner 

Causes can be normal wear over many heating and cooling cycles or damage from the continuous use of larger pots that put undue stress on the burner head.

Replacing with this OEM GE part restores a stable, level cooking surface. It is compatible with Hotpoint, RCA, and Kenmore ranges as well as preventing future repairs from minor issues. Install yours today for reliable stove-top performance.
 

Mounting screw for gas cooktops. Secures components and panels during installation. Replace if stripped, missing, or damaged during service work.

Replace your cracked, broken, or missing gas cooktop grate. This black grate supports pots and pans securely above the burner for stable cooking.

Replacement griddle for gas cooktops. Installs on the cooking surface for grilling foods. Replace if your griddle is cracked, warped, or missing.

Replace a broken or missing cooktop grate that causes pots to wobble or sit unevenly over burners. Restores stable support for safe, consistent cooking.

Damaged or wobbly grate causing unstable cookware? This black gas cooktop grate restores safe, even support for pots and pans over your burner.

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a bad burner cap can include damage from scratches or cracks that occur over time from regular use and cleaning. The burner cap material may also deteriorate due to exposure to high heat.

Symptoms of a bad burner cap include:

• Uneven or inconsistent burner performance  
• Hot spots on the burner surface
• Damage or cracking visible on the cap
• Difficulty cleaning residue or spills from the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Seals the gap around your cooktop control shaft to block spills and debris from entering the control area. Replace if worn or damaged. Verify fit.