Parts for Ge JGS760DP2WW: Control Panel & Cooktop Parts

Replace your gas range's cracked, stripped, or missing control knob assembly. Restores easy setting selection and safe operation of burners and oven.

This mounting bracket provides a secure support point for internal appliance components, restoring proper fit and stability. Replaces a cracked or broken bracket to reduce rattling and keep parts aligned. What it does:

• Secures internal components to the cabinet or frame to prevent movement
• Restores proper alignment when original bracket is cracked, bent, or missing
• Helps reduce vibration and rattling caused by loose supports
• Supports safe operation by keeping wiring and parts in their intended positions

• One mounting bracket

• Disconnect power before beginning any repair to avoid shock or injury
• Verify bracket orientation and fastener locations before removing the old part
• Use appropriate sized screws or bolts; reuse OEM fasteners when they are undamaged

A replacement mounting bracket that secures internal appliance components and restores proper support and alignment. Replacing a damaged bracket helps stop sagging parts and rattling for more stable operation. What it does:

• Holds and stabilizes an internal component or assembly to maintain correct positioning
• Prevents movement that can cause noise, vibration, or rubbing against other parts
• Restores secure fastening when the original bracket is bent, cracked, or broken
• Helps maintain proper fit and alignment of panels or assemblies for reliable operation

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; keep fasteners from the original part to ensure correct fit
• Verify bracket orientation and attachment points before tightening
• Do not reshape or force the bracket; replace if damaged to maintain safe operation

The OEM Rc19 control (flashed) is specifically designed for GE gas ranges. This control module directs burner ignition, flame adjustment and safety features.

Causes of failure can be moisture intrusion over time corroding internal circuits or obstructing valve mechanisms. Physical impact during installation or servicing may also damage electronics.

Symptoms include:

• Unresponsive or intermittent knob control of burners  
• Difficulty igniting or adjusting burner flames
• Error codes and detection of faulty components
• Clicking from gas valve or abnormal appliance operation

This genuine GE part is compatible with Hotpoint and select Kenmore models.

Replacement backguard complement trim panel for ranges. Installs behind cooktop to cover gaps and complete appearance. Needed when original is cracked or missing.

Replacement grate assembly for gas range cooktops. Provides stable cookware support above burners. Order if your grate is cracked, broken, or missing.

Replace a cracked or dented cooktop surface that prevents pots from sitting level. This range top restores your cooking surface and protects burners.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

Replacement trim kit for gas ranges. Covers gaps and provides finished look around cooktop edges. Needed when original trim is damaged, discolored, or missing.

Stainless steel #8-18 x 3/8" screw secures panels, brackets, and components in ranges, cooktops, and ovens. Replace if stripped, missing, or corroded.

White control panel overlay for gas ranges. Replaces faded, scratched, or peeling overlays on the control panel. Direct fit replacement part.

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

Oval burner assembly for gas range cooktops. Replace if your burner head or cap is cracked, clogged, damaged, or missing. Includes both burner and cap.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Replacement 8-18 x 5/16 screw secures range panels, brackets, and components. Needed when original fastener is stripped, missing, or damaged.

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Exterior trim piece that finishes and protects your gas range vent opening. Replace if cracked, dented, or missing to restore a clean appearance.

This is the flat griddle plate that sits over the center burners on compatible cooktops/ranges. It provides an even cooking surface for pancakes, sandwiches, and more, and replaces a worn or missing griddle so heat is distributed properly.

• Creates a level, flat surface over the center burners for even heating
• Helps improve cooking results when the original griddle is warped, worn, or damaged
• Can reduce sticking and uneven browning compared to a deteriorated plate
• Restores intended fit and stability on the cooktop when the original no longer seats correctly

• Let the appliance cool completely and shut off gas/electric supply before handling
• Lift off existing center grate/griddle once cool; position the new griddle so it seats securely on the designated supports
• Ensure the griddle is stable and clear of burner flames before use
• Season/condition and clean per your range's Use & Care to maintain performance