Parts for Ge P2S930SEL3SS: Control Panel & Cooktop Parts

Replace your gas range's control knob assembly if it's cracked, broken, or missing. This knob mounts on the control panel to operate burners or oven.

This panel manifold assembly secures and supports the range/oven control panel so buttons, switches and trim align and operate properly. Installing the correct manifold restores a solid, rattle-free control area and helps controls sit flush. What it does

• Supports the control panel and attached switches/controls so they stay securely positioned
• Keeps control wiring and small components routed and protected behind the console
• Eliminates loose, vibrating or misaligned panels that can make switches hard to use
• Restores proper alignment of buttons, knobs and trim for a finished appearance

• Disconnect power to the appliance before starting work; for gas ranges also shut off gas supply.
• Remove control console or backguard to access the manifold.
• Handle with care to avoid bending tabs or damaging attached wiring; use basic hand tools.
• Test panel operation before reassembling the console.

Replacement grate assembly for gas range cooktops. Provides stable cookware support above burners. Order if your grate is cracked, broken, or missing.

Replace a cracked, chipped, or discolored cooktop surface. This gas range top restores your stove's flat cooking area and finished appearance.

Replace your cracked or worn center grate for gas ranges. Sits between burners to support cookware and protect the cooktop surface. Easy to remove.

Factory screw secures brackets, panels, trim, or burner components on ranges, cooktops, and wall ovens. Replaces missing, stripped, or corroded fasteners.

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

Trim kit for gas ranges. Installs around cooktop or control panel to cover gaps and provide a finished appearance. Replace if cracked or missing.

Stainless steel #8-18 x 3/8" screw secures panels, brackets, and components in ranges, cooktops, and ovens. Replace if stripped, missing, or corroded.

Fix unresponsive or malfunctioning touch controls on your gas range with this glass touch control panel assembly. Direct replacement part.

This switch mounting bracket secures a door/console switch in place so the appliance detects door position and control inputs reliably. It's a direct-fit mounting component that keeps electrical switches properly aligned for consistent operation. What it does:

• Holds the appliance switch securely to prevent movement or misalignment
• Ensures the switch engages/disengages when the door or control is operated
• Helps restore door- or console-related functions that fail due to a loose or broken bracket
• Commonly associated with symptoms like intermittent switch activation, door not tripping the switch, or loose switch fitment

• One switch mounting bracket

• Disconnect power before starting any repair to prevent shock or injury
• Inspect the switch and surrounding hardware; replace any damaged clips or screws
• Typically fastens with screws or snaps into the console/door assembly; reuse original hardware when possible

This mounting bracket secures internal components or panels to the appliance frame, restoring proper alignment and stability. It's a simple replacement that helps stop rattling and keeps parts held in place during normal use. What it does:

• Provides a solid attachment point for interior panels, assemblies, or trim
• Prevents loosening, vibration, and noise caused by a missing or broken bracket
• Helps maintain correct alignment of nearby components for reliable operation
• Works as a direct-fit OEM replacement when the original bracket is damaged or worn

• One mounting bracket

• Disconnect power and water before starting any repair
• Support panels or assemblies while removing fasteners to avoid drops or damage
• Use appropriate hand tools; avoid overtightening fasteners to prevent stripping
• Refer to the parts diagram for correct placement and fastener locations

Replace a damaged center burner cap causing uneven flames or poor ignition. Restores flame distribution and protects the burner head on gas ranges.

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

Medium burner cap for gas cooktops and ranges. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or worn from use.

Burner cap covers the burner head and distributes flame evenly on gas ranges and cooktops. Replace if cracked, warped, or missing for proper cooking.

Burner cap assembly covers the burner head on gas cooktops and ranges. Replace cracked, stained, corroded, or missing caps to restore appearance.

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a bad burner cap can include damage from scratches or cracks that occur over time from regular use and cleaning. The burner cap material may also deteriorate due to exposure to high heat.

Symptoms of a bad burner cap include:

• Uneven or inconsistent burner performance  
• Hot spots on the burner surface
• Damage or cracking visible on the cap
• Difficulty cleaning residue or spills from the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement small surface burner for gas ranges and cooktops. Restores proper flame control when original burner is damaged, cracked, or corroded.

Medium-sized surface burner for gas cooktops and ranges. Installs on the cooktop surface. Replace if cracked, worn, or providing uneven heat distribution.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

Uneven flames or weak heat? This dual-oval burner and cap assembly restores proper ignition and flame pattern on gas ranges by replacing worn components.

Replacement burner head for gas ranges and cooktops. Installs on stovetop to distribute flame evenly. Replace if warped, cracked, or causing uneven flames.

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated or cracked porcelain-enamel exterior
• Warped or misshapen burner base that no longer sits flat
• Cookware that rocks or is unstable when placed on the burner 

Causes can be normal wear over many heating and cooling cycles or damage from the continuous use of larger pots that put undue stress on the burner head.

Replacing with this OEM GE part restores a stable, level cooking surface. It is compatible with Hotpoint, RCA, and Kenmore ranges as well as preventing future repairs from minor issues. Install yours today for reliable stove-top performance.
 

If your gas range burner won't light or clicks continuously, this igniter clip secures the ignition system. Simple DIY fix in under 15 minutes.

Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.

Protective bumper that cushions the burner grate and prevents scratching or denting the cooktop surface. Replace if cracked, worn, or missing.

Exterior trim piece that finishes and protects your gas range vent opening. Replace if cracked, dented, or missing to restore a clean appearance.

Lower front trim panel that covers the base of your range for a finished appearance. Replace if cracked, broken, or missing to restore proper coverage.

Replace your gas range control knob assembly if it's cracked, broken, or missing. This knob mounts on the control panel to operate burners and oven.

Replace your gas range's control knob assembly if it's cracked, broken, or missing. This knob mounts on the control panel to operate burners and oven.

This knob assembly replaces a damaged or worn range/stove control knob so you can set heat levels and timer settings reliably. It restores a solid grip and clear position indexing for safer, easier cooking control. What it does:

• Fits on the stove/range control shaft to change burner/oven settings
• Provides a tactile stop and visual position indicator for accurate temperature selection
• Replaces cracked, loose, or hard-to-turn knobs that affect control feel
• Helps prevent accidental setting changes by seating securely on the splined shaft

• Disconnect power (or shut off gas) before servicing controls to avoid injury
• Pull off the old knob straight from the control shaft; align splines and push the new knob fully onto the shaft until seated
• Verify proper engagement and full range of motion before normal use
• If knob does not seat or turn smoothly, stop and check shaft condition

Reversible griddle with smooth and ribbed surfaces for your gas range. Replace when worn or warped to restore even cooking. Confirm fit with your model.