Parts for Ge PGB940SEJ6SS: Control Panel & Cooktop Parts

The KNOB ASSEMBLY is an OEM component specifically designed for GE gas ranges. It provides dual interfaces for operating individual burners through an integrated control knob and push button mechanism.  

Symptoms of a bad knob assembly include:

• Loose, difficult to turn, or unresponsive knob/button functions
• Worn graphics and identification labels around the assembly
• Failure to reliably switch burners on or off through pushing motions

Continuous high-heat cooking exposure can degrade the integrity of the assembly over time. Accidental impacts introduce a risk of cracked housings as well. Replacing it with this genuine GE part restores assured burner commands through an appearance-retaining operation.

This OEM GE replacement knob assembly is also compatible with some Kenmore and RCA gas cooktop models. Reliable indication and controls maximize usability cycle after cycle.
 

This control knob assembly replaces a worn or broken knob so you can easily select heat on your range or cooktop. Restore smooth, accurate adjustment and a clean, factory look with a simple pull-off/push-on replacement.

• Attaches to the control valve/switch shaft to turn the burner on/off and set heat level
• Replaces cracked, stripped, loose, or missing knobs that wobble or spin without engaging
• Restores proper pointer alignment for more accurate temperature selection
• Helps maintain the appliance's original appearance and feel

• Disconnect power; for gas appliances, also shut off gas and allow surfaces to cool
• Pull the old knob straight off the control shaft—no tools typically required
• Align the new knob's insert with the shaft and press firmly until fully seated
• Verify smooth operation and that the pointer aligns with OFF and other settings

The Stainless Steel Manifold Panel is an OEM replacement part for GE gas ranges. As the central facing component that holds the control knobs, the manifold panel plays an essential role in operating and adjusting the burners. 

Causes of a bad manifold panel can include cracks, dents or breaks in the panel caused by repeated use over time that has put strain on the knob connections. The high heat from nearby burners accelerates wear and tear.

Symptoms of a bad manifold panel include:

• Loose, wobbly or missing control knobs  
• Difficulty adjusting burner settings
• Gas smells coming from behind the panel
• Visible cracks or damage to the panel surface

 This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Center burner cap for gas cooktops that sits on the center burner head to protect the burner and shape the flame. Replacing a damaged or missing cap can restore even flame distribution and improve ignition reliability. What it does:

• Sits on the center burner head to protect the burner and direct the flame for proper heat pattern
• Helps maintain consistent flame shape and distribution for even cooking
• Commonly fixes visible damage, chipped or missing cap issues, uneven or weak flames, and some ignition inconsistencies
• Designed to match the OEM fit and appearance for direct replacement

• Turn off the cooktop and let all components cool completely before servicing
• Remove grates and lift the old cap straight off; place the new cap flat on the burner head so it seats evenly
• After installation, test each burner for correct ignition and flame shape; if problems continue, check burner head alignment
• Do not force the cap into place or operate with cracked/damaged components

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

The GE Grate Assembly is an OEM part compatible with GE ranges. It provides the cooking surface for stovetop elements and grills.

Symptoms of a bad grate assembly include:

• Hot or cold spots are felt across the surface when heating  
• Foods sticking or burning more easily during cooking
• Grate bars no longer laying flush and evenly across the stovetop 
• Rusting, scaling, cracks, or other signs of wear in the metal

Causes of a bad grate assembly can be normal wear over many years of use. Exposure to moisture during cleaning or accidental impacts may also lead to damage.

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This rangetop and bracket assembly secures the cooktop/rangetop to the range frame, restoring proper support and alignment for burners and controls. Designed as a direct replacement to eliminate looseness and improve stability. What it does:

• Provides structural support to the rangetop so the cooktop sits level and secure
• Keeps burner components aligned for consistent ignition and heat distribution
• Prevents rattling, shifting, or gaps between the rangetop and the range frame
• Restores correct mounting where damaged, bent, or missing brackets cause instability

• One rangetop and bracket assembly

• Disconnect power (and gas, if applicable) before starting work to avoid shock or leaks
• Handle assembly carefully; brackets may be sharp or heavy—use protective gloves
• Basic hand tools required; follow factory diagram for correct bracket orientation and fastener locations

This replacement center grate sits over the middle burner(s) on select gas ranges/cooktops. It restores a stable, level cooking surface and proper pan-to-flame spacing when the original grate is worn, cracked, or missing. What it does:

• Supports cookware over the center burner and maintains correct height above the flame
• Provides a flat, stable surface for even heating
• Helps protect the cooktop surface from direct cookware contact
• Worn or damaged grates may cause wobbling cookware, uneven heating, or difficulty sliding pans

• One center grate

• Ensure all burners are off and the cooktop is completely cool before handling
• Lift off the old grate and clear any debris from the burner area
• Set the new grate so all feet/pads are seated and it sits flat and centered
• Handle carefully; avoid impacts that could chip surrounding surfaces

This factory fastener secures internal components or panels in your appliance. Replacing a missing or stripped screw restores a snug fit, helps prevent vibration or rattling, and keeps assemblies aligned for proper operation.

• Secures brackets, panels, or internal components to the frame
• Replaces missing, rusted, or stripped hardware
• Helps reduce rattling, vibration, or loose-fit issues
• Maintains proper alignment and fit of assemblies

• Disconnect power before servicing
• Use the correct driver to avoid stripping the screw head
• Install in the original location; match thread and length to the original
• Tighten until snug; do not overtighten, especially into plastic or thin metal

This backguard eyebrow is the top trim piece that finishes the range's control panel area, restoring appearance and protecting the backguard edge from spills and heat. It provides a clean factory look for worn or damaged trim. What it does:

• Covers and protects the upper edge of the range backguard and control area
• Restores a finished appearance when the original trim is dented, scratched, or missing
• Helps reduce buildup of grease at the top of the control panel
• Matches OEM fit and mounting points for a direct replacement

• One backguard eyebrow trim piece

• Remove power to the appliance before beginning service
• Basic hand tools typically required; handle trim carefully to avoid scratching finish
• Follow OEM instructions for proper alignment and secure mounting

The Burner Cap is an OEM replacement part for GE gas cooktops. This one is the outer part of the burner cap that sits over the inner burner head and flames on a gas cooktop burner. The cap helps protect the inner burner parts while also directing and controlling the burner flame.

Symptoms of a faulty burner cap include:

• Uneven or weak flame
• Gas leakage around the burner heads
• Difficulty in adjusting the flame intensity

A bad outer cap can occur due to wear and tear, accidental damage, or exposure to high temperatures. If you notice signs of damage, such as cracks, discoloration, or a loose fit, it may be time to replace the outer cap. Replacing this part can help improve burner performance and flame if the old cap is damaged or corroded. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the gas burner to help distribute the flame evenly for better cooking performance. This cap is crucial for achieving precise temperature control and consistent heating, ensuring that food cooks evenly across the cookware.

Symptoms of a bad Burner Cap Assembly include:

• Uneven flame distribution, leading to uneven cooking or heating.
• Difficulty igniting the burner, or the flame going out unexpectedly.
• Visible signs of wear, such as warping, discoloration, or chipping of the burner cap.

Causes of a bad burner cap can include accumulation of food particles or cleaning products that clog the ports, physical damage from impact or dropping, or general deterioration from regular exposure to high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap is an OEM part for GE ranges. It covers the burner head, helping to distribute the flame evenly for optimal cooking performance and protecting the burner head from spills and debris.

Common causes of a bad burner cap include exposure to high heat, which can cause warping or discoloration, physical damage from dropping or mishandling, and buildup of food residue that can degrade the material over time.

Symptoms of a bad burner cap include:

• Uneven or weak flame
• Difficulty in lighting the burner
• Visible cracks, chips, or discoloration on the cap
• Burner not performing efficiently

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE cooktops and ranges. It is designed to cover the burner head, ensuring even flame distribution for efficient and effective cooking. The cap also protects the burner head from spills and debris, which can interfere with burner performance and cause clogs.

You should replace the burner cap assembly if it becomes damaged or worn out. Causes of a bad burner cap assembly can include regular exposure to high heat, food residue buildup, or accidental impacts that cause cracks or warping. A compromised burner cap can lead to uneven flames and inefficient cooking.

Symptoms of a bad burner cap assembly include:

• Uneven or yellow flames
• Difficulty igniting the burner
• Visible cracks, chips, or warping in the burner cap
• Poor cooking performance with hotspots on cookware

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The burner cap is an OEM component specifically designed for GE wall ovens and ranges. The inner burner cap is responsible for evenly distributing heat across the burner surface while protecting the burner element underneath. 

Causes of a bad burner cap can include damage from scratches or cracks that occur over time from regular use and cleaning. The burner cap material may also deteriorate due to exposure to high heat.

Symptoms of a bad burner cap include:

• Uneven or inconsistent burner performance  
• Hot spots on the burner surface
• Damage or cracking visible on the cap
• Difficulty cleaning residue or spills from the burner area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner, Small V2 is an OEM part for GE ranges and cooktops. This part provides a controlled and efficient flame for cooking, specifically tailored for applications requiring a smaller, more precise heat source. Perfect for simmering sauces, melting chocolate, or any cooking task that necessitates a gentle heat, this burner ensures consistent performance and reliability.

Causes of deterioration can include clogging from food spills or cleaning products, wear and tear from regular use, and corrosion or damage to the burner assembly itself.  

Symptoms of a bad Burner, Small V2 include:

• The burner fails to light or has an uneven flame.
• Reduced heat output, affecting cooking times and food quality.
• The presence of a yellow or orange flame, indicating incomplete combustion.
• Noisy operation or popping sounds when ignited.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Range Burner is an OEM replacement part for GE ranges. It is responsible for safely producing gas flames to heat the range surface. Whether baking, broiling, or simmering, the range burner must provide precise flame control and heat distribution.

Causes of a bad range burner can include cracked or rusted burner heads that improperly direct the flame, clogged or restricted gas ports that disrupt fuel flow or wear to ignition components that affect lighting.

Symptoms of a bad range burner include:

• Irregular or uneven heating of the range surface
• Difficulty controlling burner flame heights
• Burners that will not light or stay lit
• Singed, scorched, or burnt foods
• Gas leaks around burners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

The Medium Burner is an OEM part for GE ranges and cooktops. This medium-sized burner part provides a balanced heat source for cooking. The medium burner is often used for everyday cooking tasks, offering a versatile option for boiling, sautéing, and simmering.

Causes of damage or malfunction in a burner can stem from regular use, spills and buildup of cooking materials that clog the burner ports, or corrosion over time affecting the burner's efficiency.  

Symptoms of a bad medium burner include:

• Inability to achieve a consistent flame 
• The burner not lighting at all 
• An irregular flame pattern or color (e.g., yellow flames instead of blue)

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Surface Burner is an OEM part for GE gas ranges. As the critical surface heat is delivered through, it is exposed to extreme temperature variations during cooking.

Symptoms of a bad surface burner include: 

• Deteriorated or cracked porcelain-enamel exterior
• Warped or misshapen burner base that no longer sits flat
• Cookware that rocks or is unstable when placed on the burner 

Causes can be normal wear over many heating and cooling cycles or damage from the continuous use of larger pots that put undue stress on the burner head.

Replacing with this OEM GE part restores a stable, level cooking surface. It is compatible with Hotpoint, RCA, and Kenmore ranges as well as preventing future repairs from minor issues. Install yours today for reliable stove-top performance.
 

This housing transceiver is the outer mounting enclosure that secures and protects the appliance's transceiver assembly, helping maintain reliable signal and control communication. It replaces cracked or broken housings to restore proper fit and protection. What it does:

• Holds and protects the wireless/transceiver module and related wiring from physical damage
• Helps maintain proper alignment and connection to the appliance control assembly
• Common symptom: damaged or cracked housing that exposes electronics or prevents secure mounting
• Common symptom: intermittent signal or communication issues when the transceiver is loose or misaligned

• One housing transceiver

• Disconnect power to the appliance before beginning any repair to avoid shock or component damage
• Handle the transceiver and circuit connections carefully to avoid bending pins or ESD damage
• Installation typically requires removing the control console or access panel and a few fasteners; keep track of screws and gaskets

The Clip Igniter is an OEM replacement part for GE ranges.

This GE OEM replacement is also compatible with some Hotpoint, Sears Kenmore, and RCA models. 

This wiring harness connects the oven/range WiFi module to the appliance control circuitry, restoring smart connectivity and communication with the range's control board for remote features and firmware updates. What it does:

• Provides the electrical connection between the WiFi module and the main control board
• Restores lost or intermittent WiFi/Smart?? caused by damaged or loose wiring
• Prevents communication errors between the module and appliance electronics
• Helps recover remote control, diagnostics, and update capabilities when wiring is at fault

• One WiFi module wiring harness

• Disconnect power to the appliance before servicing to avoid shock or damage
• Replace only with the exact harness; match connectors and routing to the original
• Remove control panel or access cover as needed to reach module and board
• Handle connectors carefully and secure wiring to prevent pinching or strain

A replacement ground harness that restores the appliance's chassis grounding connection to help ensure safe electrical operation. Installs quickly to replace a damaged or corroded ground lead and reduce risk of arcing. What it does

• Provides the dedicated chassis ground connection between appliance wiring and the cabinet
• Restores proper grounding when original harness is broken, frayed, corroded, or detached
• Helps prevent intermittent power issues, arcing, or nuisance tripping caused by poor ground continuity
• Used wherever a short ground lead or bonded connector is required for safety

• One ground harness as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any repair
• Verify correct grounding point on the cabinet and secure the harness with the original screw or fastener
• Match connectors and routing to the original harness; avoid touching energized terminals during installation

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Range Surface Burner Grate Bumper is an OEM replacement part for GE ranges. The bumper protects the burner grate from scratching or denting the cooktop surface below when lowered into position. 

Symptoms of a damaged or missing bumper include: 

• Scuff marks or abrasions on the cooktop under the burner grate area
• Noise or rubbing sensations when operating burners  
• Loose or detached fit of the burner grate on the range surface

Causes stem from regular use of the burner grates over many cooking cycles. Natural wear and repeated contact with surfaces can degrade bumpers over time.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore ranges and cooktops.

The Knob is an OEM part for GE ranges. It attaches to the control panel and allows for adjustment of temperature settings, function selectors and timers. With a sturdy construction and tactile grips, the knob facilitates easy and intuitive control use.

Causes of a bad knob can include cracks or breaks from impact or excessive force, deterioration of markings from heat/steam exposure over time, or looseness from normal wear and tear of internal components.

Symptoms of a bad knob include:

• Discoloration, fading or illegibility of printed markings
• Difficulty turning or grasping the knob securely
• Inaccurate or inconsistent response when adjusting dials
• Loose, wobbly or lack of firm attachment to the control shaft

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This reversible griddle replaces a worn or missing cooktop griddle and restores a stable, even cooking surface. Use the smooth side for traditional griddling or the ridged side for grill-style searing—whichever suits the meal.

• Provides two cooking surfaces in one part: flat griddle on one side and ribbed grill on the other
• Sits securely on cooktop grates when properly positioned for stable, even heating
• Replaces a cracked, warped, or missing griddle to restore safe, consistent performance
• Helps eliminate rocking or tipping when correctly aligned with the grate supports

• Turn off all burners and allow the cooktop and grates to cool completely before handling
• Remove any grate or cover as required by your model; place the griddle with the desired side facing up
• Align with the grate supports or locator features and ensure the griddle sits level and secure
• Clean and condition/season as directed in your appliance's use and care manual before first use